How to Maintain and Fix the Hood Cable on Dodge Stratus?

Service and repair of the hood cable involves first removing the hood latch and the left front cowl trim panel. After that, remove the screws holding the hood release handle to the inner cowl panel and take out the clips connecting the hood cable to the left inner frame rail. Withdraw the rubber grommet at the lower dash and separate the fastener joining the hood cable. Once they are out, you can take off the cable. Pull the hood cable back through the hole in the lower dash panel into the inner frame rail, with the rubber grommet secured against the dash. Secure the cable using the push-in fastener and then mount the hood release handle screws to the inner cowl panel, tightening them to 1.8 N.m (16 in.lbs.) Put on the left front cowl trim, insert the release cable into the clips along the inner frame rail and set the hood latch in place.

OEM Dodge Stratus Hood Cable

Hood Release Cable

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Hood Cable found

View related parts
Dodge Stratus Release Cable, Front Part Number: MR271734
Product Specifications
- Other Name: Cable - Hood Lock Release; Hood Release Cable, Front; Cable Hood Lock Release; Hood Release Cable
- Position: Front
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2001-2005 Dodge Stratus | R/T, SE, SXT | 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L GAS

Dodge Stratus Hood Cable

Choose OEM Hood Cable that meet Dodge factory standards. Dodge designs and tests every component for precision and durability. Each Hood Cable follows strict manufacturing steps to lock in quality and fit. If your Dodge Stratus matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Stratus parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

A Dodge Stratus Hood Cable serves as the crucial linkage between hood release lever and hood latch mechanism which allows drivers to open their engine compartment easily. The Dodge Stratus Hood Cable stands out because of its superb performance and reliable structure which enables safer operation and efficiency improvement for Dodge Stratus vehicles. This Hood Cable works across different Dodge Stratus models from 1995 to 2005 but needs periodic care to avoid damage that might deteriorate its performance. The Hood Cable works through the hood release lever to activate the latch mechanism thus providing unhindered opening of the hood for engine component access needed during maintenance operations. The car Hood Cable stays ahead in the automotive segment because it has strong components and easy installation features which make it an ideal choice for car owners who want to keep their vehicles in good condition. Optimal known for its strong build the car Hood Cable boosts Dodge Stratus performance while at the same time enhances vehicle safety through unimpeded hood operation. The car Hood Cable serves as a vital design element which highlights both the automaker model quality standards and user satisfaction throughout this automotive model.

Dodge Stratus Hood Cable Parts and Q&A

Release Cable, Front
MR271734
Q: How to Maintain and Fix the Hood Cable on Dodge Stratus?
A:
Service and repair of the hood cable involves first removing the Hood Latch and the left front cowl trim panel. After that, remove the screws holding the hood release handle to the inner cowl panel and take out the clips connecting the hood cable to the left inner frame rail. Withdraw the rubber grommet at the lower dash and separate the fastener joining the hood cable. Once they are out, you can take off the cable. Pull the hood cable back through the hole in the lower dash panel into the inner frame rail, with the rubber grommet secured against the dash. Secure the cable using the push-in fastener and then mount the hood release handle screws to the inner cowl panel, tightening them to 1.8 N.m (16 in.lbs.) Put on the left front cowl trim, insert the release cable into the clips along the inner frame rail and set the hood latch in place.