How to Inspect and Replace Sway Bar Bushings on Dodge Stratus?

Review the sway bar bushings to make sure their retainer is not separated or their bushing is not damaged. Should you need to change the bushings, open the slit and pull them out of the sway bar. While introducing the sway bar into the vehicle, put it in last, just like you removed it. Position the bend in the end closer to you on the side so that it leans upward. Attach the sway bar to the forward lateral link attaching links and mount the bushings on the links, then fasten the bushings with the retaining nuts tightened to a torque of 35 Nm (26 ft. lbs.). Place the sway bar bushing clamps near the rear suspension crossmember in a loose fashion, center the sway bar in the vehicle body to prevent contact and also prevent it from touching any other part of the suspension. Put in 27 Nm (19 ft. lbs.) of torque to secure the sway bar bushing clamps to the rear crossmember. Having installed the wheel and tire, tighten the stud nuts in the right pattern to halfway specifications and then tighten them again to reach the full specifications of 135 Nm (100 ft. lbs.). When you are done, lower the car back onto the ground.

How to Service a Sway Bar Bushing on Dodge Stratus?

You should first bend back each of the 4 crimp places on the sway bar bushing retainer before separating the retainer. Take out the bushings for the sway bar by opening the trim and peeling them out. When you install the sway bar, put the new bushings on the bar so the slits in the bushings are in the front section of the vehicle. In the end, slide the bushing retainers onto the sway bar bushings.

OEM Dodge Stratus Sway Bar Bushing

Stabilizer Sway Bar Bushing

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

9 Sway Bar Bushings found

View related parts
Dodge Stratus Stabilizer Bar Bushing, Rear Part Number: 4782339AA
$6.71 MSRP: $11.85
You Save: $5.14 (44%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bushing - Sway Bar; Suspension Stabilizer Bar Bushing, Rear; Sway Bar Bushing; Bushing; Bushing Stabilizer Bar
- Position: Rear
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2003-2006 Dodge Stratus | ES, R/T, SE, SXT | 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS
View related parts
Dodge Stratus Stabilizer Bar Bushing, Rear Part Number: 4782338AA
$10.37 MSRP: $15.40
You Save: $5.03 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bushing - Sway Bar; Suspension Stabilizer Bar Bushing, Rear; Bushing; Bushings; Bushing Stabilizer Bar
- Position: Rear
- Replaces: 4695744
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2001-2005 Dodge Stratus | ES, R/T, SE, SE Plus, SXT | 2.4L L4, 2.7L V6, 4 Cyl 2.4 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS
- 1995-1998 Dodge Stratus | 2.0L L4, 2.4L L4, 2.5L V6
View related parts
Dodge Stratus Stabilizer Bar Cushion Part Number: 4879307AA
$5.26 MSRP: $6.67
You Save: $1.41 (22%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bushing - Sway Eliminator; Suspension Stabilizer Bar Bushing Kit.; Bushings; Cushion Sway Eliminator
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2001-2006 Dodge Stratus | ES, R/T, SE, SE Plus, SXT | 4 Cyl 2.4 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS, 6 Cyl 3.0 L GAS
View related parts
Dodge Stratus Stabilizer Bar Bushing, Front Part Number: MR589817
$7.50 MSRP: $8.60
You Save: $1.10 (13%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bushing - Sway Bar; Suspension Stabilizer Bar Bushing, Front; Sway Bar Bushing; Bushings; Bushing Stabilizer Bar
- Position: Front
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2001-2005 Dodge Stratus | R/T, SE | 6 Cyl 3.0 L GAS
View related parts
Dodge Stratus Stabilizer Assembly Cushion Part Number: 4616987
Product Specifications
- Other Name: Bushing - Sway Eliminator; Suspension Stabilizer Bar Bushing Kit.; Stabilizer Bar Cushion; Bushings; Shaft, Front Suspension Sway; Cushion Sway Eliminator
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1995-1998 Dodge Stratus | Base, ES | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS, 6 Cyl 2.5 L GAS
View related parts
Dodge Stratus Stabilizer Bar Bushing, Rear Part Number: MR297629
Product Specifications
- Other Name: Bushing - Sway Bar; Suspension Stabilizer Bar Bushing, Rear; Sway Bar Bushing; Bushings; Bushing Stabilizer Bar
- Position: Rear
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2001-2004 Dodge Stratus | R/T | 6 Cyl 3.0 L GAS
View related parts
Dodge Stratus Stabilizer Bar Bushing, Rear Part Number: MR272717
Product Specifications
- Other Name: Bushing - Sway Bar; Rear Suspension Stabilizer Bar Bushing Kit.; Bushings; Bushing Stabilizer Bar
- Position: Rear
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2001-2005 Dodge Stratus | R/T, SE, SXT | 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L GAS
View related parts
Dodge Stratus Stabilizer Bar Bushing Part Number: 4616087
Product Specifications
- Other Name: Bushing - Sway Bar; Sway Bar Bushing; Stabilizer Link Bushing; Sway Bar Bushing (Rubber Ms - Z77, Plate Steel-4480A1Bd5-1R)
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1995-2000 Dodge Stratus | Base, ES, SE | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS, 6 Cyl 2.5 L GAS
View related parts
Dodge Stratus Stabilizer Bar Bushing, Front Part Number: MR589815
Product Specifications
- Other Name: Bushing - Sway Bar; Suspension Stabilizer Bar Bushing, Front; Sway Bar Bushing; Bushings; Bushing Stabilizer Bar; Suspension Stabilizer Bar Bushing
- Position: Front
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2001-2005 Dodge Stratus | ES, SE, SE Plus, SXT | 4 Cyl 2.4 L GAS

Dodge Stratus Sway Bar Bushing

Choose OEM Sway Bar Bushing that meet Dodge factory standards. Dodge designs and tests every component for precision and durability. Each Sway Bar Bushing follows strict manufacturing steps to lock in quality and fit. If your Dodge Stratus matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Stratus parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

The Stratus Sway Bar Bushing is among the critical and small but vital car components that improve the Dodge Stratus car dependability. Found in between the body and the sway bar or stabilizer bar, these bar reducing road bumps and lessening noise, these sway bar bushings bring stability to the Dodge Stratus during turns. Applying to numerous models of Dodge Stratus sedans and coupes manufactured between 1995 and 2005, the Sway Bar Bushing is a universal part for Stratus car-owners. Special attention should be paid to these bushings; when they become worn out, it results in slow car responsiveness and steering problems, which influence both effectiveness and security of a vehicle. The Dodge Stratus Sway Bar Bushing does occupy a unique place in the market of automotive components because of its great build quality and contribution to stabilization of the car, making it more comfortable when being operated and controlling the inclination in turns. Since the new Dodge Stratus was widely publicized for affordable price rates coupled with high performance ratings - the bar which has been set as reaching 0-60 mph in 7.5 seconds; the function of the Sway Bar Bushing becomes extremely crucial so that every driver out there, would want to feel secure behind the wheels. Any form of damage that may seem trivial is important to have it repaired so that the Dodge Stratus will not pose a danger and at the same time, the owner can have the comfort in driving his or her own car. In their overall opinion, it was strongly identified that the Dodge Stratus Sway Bar Bushing is a crucial component of the vehicle suspension system and it plays its role for the enhancement of the efficiency and safety of the Dodge Stratus.

Dodge Stratus Sway Bar Bushing Parts and Q&A

Stabilizer Bar Bushing, Rear
4782339AA
Q: How to Inspect and Replace Sway Bar Bushings on Dodge Stratus?
A:
Review the sway bar bushings to make sure their retainer is not separated or their bushing is not damaged. Should you need to change the bushings, open the slit and pull them out of the sway bar. While introducing the sway bar into the vehicle, put it in last, just like you removed it. Position the bend in the end closer to you on the side so that it leans upward. Attach the sway bar to the forward lateral link attaching links and mount the bushings on the links, then fasten the bushings with the retaining nuts tightened to a torque of 35 Nm (26 ft. lbs.). Place the sway bar bushing clamps near the rear suspension crossmember in a loose fashion, center the sway bar in the vehicle body to prevent contact and also prevent it from touching any other part of the suspension. Put in 27 Nm (19 ft. lbs.) of torque to secure the sway bar bushing clamps to the Rear Crossmember. Having installed the wheel and tire, tighten the stud nuts in the right pattern to halfway specifications and then tighten them again to reach the full specifications of 135 Nm (100 ft. lbs.). When you are done, lower the car back onto the ground.
Stabilizer Bar Bushing, Rear
4782338AA
Q: How to Service a Sway Bar Bushing on Dodge Stratus?
A:
You should first bend back each of the 4 crimp places on the sway bar bushing retainer before separating the retainer. Take out the bushings for the sway bar by opening the trim and peeling them out. When you install the sway bar, put the new bushings on the bar so the slits in the bushings are in the front section of the vehicle. In the end, slide the bushing retainers onto the sway bar bushings.