What Precautions Are Necessary Before Servicing an A/C Accumulator on Dodge Viper?

To start working on the A/C accumulator, check that all refrigeration gases have been removed. We should remember that the A/C accumulator for a 134a refrigerant system cannot be mixed with the one designed for R-12 refrigerant. Make sure no water or moisture enters your R-134a system, as any oil moisture can disrupt the working of your compressor. When the job is finished, open the hood, disconnect the top lines from the A/C accumulator and throw out the used O-rings. Afterward, take out the two bolts near the toe box for the A/C accumulator and unclamp the A/C accumulator from its holder. Cover the places where the refrigerant comes in and out to stop contamination. Change the rubber O-rings at the ends of both refrigerant lines going to the A/C accumulator, return the lines to their positions and fix the A/C accumulator to the refrigerant block with nuts at a torque of 5 to 6 Nm (40 to 50 in. lbs.). Lastly, take out the old compressor and fill the system with Freon (A/C).

How to Remove the A/C Accumulator from the System on Dodge Viper?

To take out the accumulator, unhook the negative battery cable and then remove the refrigerant from the system. Hand the vehicle up and get rid of the right front tire as well as the right fender splash screen. The wire harness connector must be separated from the A/C low pressure switch. Then, take out the bolts holding the two halves of the A/C suction line to the A/C accumulator. Pull the A/C suction lines away from the A/C accumulator and throw out the O-ring seals. Take out the two nuts that hold the A/C accumulator to the inner front fender and remove the part from the car. Install plugs or tape over the open suction line fittings and accumulator ports and if needed, take the A/C low pressure switch out of the A/C accumulator.

OEM Dodge Viper A/C Accumulator

Accumulator

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 A/C Accumulators found

View related parts
Dodge Viper Dehydrator Part Number: 5264990AC
$188.08 MSRP: $222.00
You Save: $33.92 (16%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Accumulator - A/C; A/C Receiver Drier; Drier Desiccant Element; A/C Accumulator; Drier; Accumulator A/C
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2003-2004 Dodge Viper | SRT-10 | 10 Cyl 8.3 L GAS
View related parts
Dodge Viper Dehydrator Part Number: 5181845AA
$91.60 MSRP: $113.00
You Save: $21.40 (19%)
ADD TO CART
Product Specifications
- Other Name: Drier - Receiver; A/C Receiver Drier; Drier Desiccant Element; A/C Accumulator; Drier; Drier Receiver
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2015-2017 Dodge Viper | ACR, Base, GT, GTC, GTS | 10 Cyl 8.4 L GAS
View related parts
Dodge Viper Dehydrator Part Number: 4708201
Product Specifications
- Other Name: Drier; Drier Desiccant Element; A/C Receiver Drier; A/C Accumulator; Drier, Receiver, W/Bracket; Receiver Drier
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1994-2002 Dodge Viper | ACR, Base, GT2, GTS, R/T-10 | 10 Cyl 8.0 L GAS
View related parts
Dodge Viper Dehydrator Part Number: 5264990AD
$107.86 MSRP: $139.00
You Save: $31.14 (23%)
Product Specifications
- Other Name: Accumulator - A/C; A/C Receiver Drier; Drier Desiccant Element; A/C Accumulator; Drier; Accumulator A/C; Accumulator
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2008-2010, 2005-2006 Dodge Viper | SRT-10, SRT-10 ACR | 10 Cyl 8.3 L GAS, 10 Cyl 8.4 L GAS

Dodge Viper A/C Accumulator

Choose OEM A/C Accumulator that meet Dodge factory standards. Dodge designs and tests every component for precision and durability. Each A/C Accumulator follows strict manufacturing steps to lock in quality and fit. If your Dodge Viper matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Viper parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

The Dodge Viper A/C Accumulator is an important part of the autos which highlights its dependability and efficacy of the Dodge Viper air control framework. The A/C Accumulator is much acclaimed for its stunning performance and it is a component that is most vital in the absorption of moisture and trapping of debris in order to offer protection to the overall A/C system depending on the possible harm that could be inflicted to the entire system. This is particularly so for different viper models including viper 1050, viper 1250, viper 4350, and viper 5350, the accumulator is located in the high pressure, liquid line thus protecting it from corrosion and sludge build that can cause system failure. During major services of the Dodge Viper A/C, the A/C Accumulator should be replaced periodically because high pressure builds up in it and leads to abnormal gauge readings. The Dodge Viper A/C Accumulator is a critical component of any car primarily because it optimizes the overall efficiency of the automobile's climate control system and also boosts the lifespan of the car in question, in this instance, the Viper. The item was developed primarily for the Dodge Viper; therefore, you can use it together with numerous models of the car throughout the model's evolution. Advantages of the A/C Accumulator include the following; the product as adopted in the automotive industry has a special rigid structure and is good at absorption of moisture hence propel the Dodge Viper as a symbol of innovation and horsepower. Therefore, the Dodge Viper A/C Accumulator is very essential to support the firmness of the Viper's air conditioning system as well as contributes to build up the image of the Viper as a reliable and excellent car.

Dodge Viper A/C Accumulator Parts and Q&A

Dehydrator
4708201
Q: What Precautions Are Necessary Before Servicing an A/C Accumulator on Dodge Viper?
A:
To start working on the A/C accumulator, check that all refrigeration gases have been removed. We should remember that the A/C accumulator for a 134a refrigerant system cannot be mixed with the one designed for R-12 refrigerant. Make sure no water or moisture enters your R-134a system, as any oil moisture can disrupt the working of your compressor. When the job is finished, open the hood, disconnect the top lines from the A/C accumulator and throw out the used O-rings. Afterward, take out the two bolts near the toe box for the A/C accumulator and unclamp the A/C accumulator from its holder. Cover the places where the refrigerant comes in and out to stop contamination. Change the rubber O-rings at the ends of both refrigerant lines going to the A/C accumulator, return the lines to their positions and fix the A/C accumulator to the refrigerant block with nuts at a torque of 5 to 6 Nm (40 to 50 in. lbs.). Lastly, take out the old compressor and fill the system with Freon (A/C).
Dehydrator
5264990AD
Q: How to Remove the A/C Accumulator from the System on Dodge Viper?
A:
To take out the accumulator, unhook the negative Battery Cable and then remove the refrigerant from the system. Hand the vehicle up and get rid of the right front tire as well as the right fender splash screen. The wire harness connector must be separated from the A/C low pressure switch. Then, take out the bolts holding the two halves of the A/C suction line to the A/C accumulator. Pull the A/C suction lines away from the A/C accumulator and throw out the O-ring seals. Take out the two nuts that hold the A/C accumulator to the inner front fender and remove the part from the car. Install plugs or tape over the open suction line fittings and accumulator ports and if needed, take the A/C low pressure switch out of the A/C accumulator.