How to Remove the A/C Hose Liquid Line on Dodge Viper?

Start by separating and insulating the negative battery cable prior to taking out the A/C liquid line. Get rid of the refrigerant from the refrigeration system. After that, detach the air intake ducts attached to the front of the air cleaner assembly. Release the bolt that fastens the A/C liquid line to the right fender and the bolt attaching it to the A/C condenser. Release the liquid line tank clamp at the A/C condenser and throw out the old O-ring seal. Let go of the nut that holds the A/C liquid line to the A/C evaporator, take the line out of the evaporator and throw away the O-ring seal. Afterward, take out the A/C liquid line from the engine and close or cover the holes in the fittings and all the openings in the condenser and evaporator with plugs.

How to Properly Install and Service an A/C Hose Discharge Line on Dodge Viper?

Ensure you have adjusted the oil level properly so that the A/C discharge line installation does not create problems for your system. Check the Refrigerant Oil Capacities chart to find out how much oil to install when using multiple replacement parts. Be sure to install new O-ring seals on the refrigerant line every time you take apart the connection, to prevent leaks from happening. Inject the A/C discharge line into the engine compartment and get rid of any tape or plugs you found on its fittings and the ports of the condenser and compressor. Get ready by putting clean r134a refrigerant oil on a new rubber O-ring seal, attach it to the case around the connection and make sure to use only O-ring seals and the specified r134a oil for this refrigerant in your vehicle's AC compressor. Screw bolt 2 into the A/C discharge line and the A/C compressor coupling together. Then tighten the bolt to 23 Nm (17 ft. lbs.). After that, attach the A/C discharge line to the A/C condenser and secure it with bolt 5, turning it to 18 Nm (13 ft. lbs.). Secure the A/C discharge line to the left frame rail with bolt 2 and make sure it is tight. Remove the broken or malfunctioning A/C pressure transducer, install a new one and tighten it well in the A/C discharge line. Glue or seal the wire harness connector onto the A/C pressure transducer, connect the air intake ducts to the front of the air cleaner box and fasten the negative battery cable as shown in the diagram. Empty the refrigerant, adjust the oil in the refrigerant system and fill it back up if needed.

OEM Dodge Viper A/C Hose

Air Conditioning Hose

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

13 A/C Hoses found

View related parts
Dodge Viper Suction Hose Part Number: 5264928AA
$37.12 MSRP: $44.00
You Save: $6.88 (16%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Line - A/C Suction; A/C Refrigerant Suction Hose; A/C Refrigerant Liquid Hose; A/C Hose; Suction Line; Line A/C Suction
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2008-2010, 2003-2006 Dodge Viper | SRT-10, SRT-10 ACR | 10 Cyl 8.3 L GAS, 10 Cyl 8.4 L GAS
View related parts
Dodge Viper Discharge Hose Part Number: 5264927AE
$197.14 MSRP: $241.00
You Save: $43.86 (19%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Line - A/C Discharge; A/C Refrigerant Discharge Hose; A/C Refrigerant Liquid Hose; A/C Hose; Line A/C Discharge
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2015-2017 Dodge Viper | ACR, Base, GT, GTC, GTS | 10 Cyl 8.4 L GAS
View related parts
Dodge Viper Liquid Line Part Number: 5264926AC
$105.87 MSRP: $128.00
You Save: $22.13 (18%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Line - A/C Liquid; A/C Refrigerant Liquid Hose; A/C Hose; Line A/C Liquid
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2003-2004 Dodge Viper | SRT-10 | 10 Cyl 8.3 L GAS
View related parts
Dodge Viper Suction Hose Part Number: 68545796AA
Product Specifications
- Other Name: Line - A/C Suction; A/C Refrigerant Suction Hose; A/C Hose
- Replaces: 5264988AG, 5264988AE, 5264988AF, 5264988AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2008-2010 Dodge Viper | 8.4L V10
- 2003-2006 Dodge Viper | 8.3L V10
View related parts
Dodge Viper Expansion Valve Part Number: 5093077AA
Product Specifications
- Other Name: Orifice - Liquid Line; A/C Expansion Valve; Orifice Liquid Line
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2003-2004 Dodge Viper | SRT-10 | 10 Cyl 8.3 L GAS
View related parts
Dodge Viper Suction Hose Part Number: 5264988AJ
$70.25 MSRP: $83.00
You Save: $12.75 (16%)
Product Specifications
- Other Name: Line - A/C Suction; A/C Refrigerant Suction Hose; A/C Refrigerant Liquid Hose; A/C Hose
- Replaced by: 5264988AI
- Replaces: 5264988AI
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2015-2017 Dodge Viper | ACR, Base, GT, GTC, GTS | 10 Cyl 8.4 L GAS
View related parts
Dodge Viper Liquid Line Part Number: 4848164
Product Specifications
- Other Name: Line - A/C Liquid; A/C Refrigerant Liquid Hose; A/C Hose; Line Assembly, Liquid; Line A/C Liquid
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1994-2002 Dodge Viper | ACR, Base, GT2, GTS, R/T-10 | 10 Cyl 8.0 L GAS
View related parts
Dodge Viper Suction Hose Part Number: 4708197
Product Specifications
- Other Name: Line Assembly - Assembly - A/C Suction; A/C Refrigerant Liquid Hose; A/C Hose; Line Assembly, Suction
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1994-1995 Dodge Viper | Base | 10 Cyl 8.0 L GAS
View related parts
Dodge Viper Liquid Line Part Number: 5264926AH
Product Specifications
- Other Name: Line - A/C Liquid; A/C Refrigerant Liquid Hose; A/C Hose; Line A/C Liquid
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2015-2017 Dodge Viper | ACR, Base, GT, GTC, GTS | 10 Cyl 8.4 L GAS
View related parts
Dodge Viper Suction Hose Part Number: 5245035AB
Product Specifications
- Other Name: Line - A/C Suction; A/C Refrigerant Liquid Hose; A/C Hose
- Replaces: 5245035
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1992-2002 Dodge Viper | ACR, Base, GT2, GTS, R/T-10 | 10 Cyl 8.0 L GAS, 8.0L V10
View related parts
Dodge Viper Discharge Hose Part Number: 5264924AB
Product Specifications
- Other Name: Line - A/C Discharge; A/C Refrigerant Liquid Hose; A/C Hose
- Replaces: 5264924AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1996-2002 Dodge Viper | ACR, Base, GT2, GTS, R/T-10 | 10 Cyl 8.0 L GAS, 8.0L V10
View related parts
Dodge Viper Liquid Line Part Number: 5264926AE
Product Specifications
- Other Name: Line - A/C Liquid; A/C Refrigerant Liquid Hose; A/C Hose; Line A/C Liquid
- Replaces: 5264926AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2008-2010 Dodge Viper | 8.4L V10
- 2004-2006 Dodge Viper | 8.3L V10
View related parts
Dodge Viper Discharge Hose Part Number: 5264927AC
Product Specifications
- Other Name: Line - A/C Discharge; A/C Refrigerant Discharge Hose; A/C Refrigerant Liquid Hose; A/C Hose; Line A/C Discharge
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2008-2010, 2003-2006 Dodge Viper | SRT-10, SRT-10 ACR | 10 Cyl 8.3 L GAS, 10 Cyl 8.4 L GAS

Dodge Viper A/C Hose

Choose OEM A/C Hose that meet Dodge factory standards. Dodge designs and tests every component for precision and durability. Each A/C Hose follows strict manufacturing steps to lock in quality and fit. If your Dodge Viper matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Viper parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

The A/C Hose plays an important role in the Dodge Viper's air conditioning system and helps in enhancing the cooling of the automobile with the aid of proper rASC circulation of refrigerant from the compressor to some other AC related parts. This A/C Hose is highly pressurized and uses aluminum fittings to avoid leakage which is essential in sustaining the car's performance and comfort. The A/C Hose also transforms the look of the car while serving its primary function of removing heat from the cabin ensuring that all those in the car are comfortable whether on the track or on the road. This A/C Hose is relevant and can fit different Viper models: RT/10 and GTS among them. Evaluating the car's design, its durability and efficiency, one could note it is an outstanding element of the car market, which keeps the Viper exceptional. Moreover, the A/C Hose plays a vital role in safe driving as well as driving comforts since the increment of temperature or poor cooling of the car's interior may lead to certain big problems in certain conditions. Being specifically designed for the high performance requirements found in the Viper, this A/C Hose is a fine representation of the excellent quality and advanced engineering strategies that Dodge is all about, thus placing the Viper among the greatest legends in the field of sports cars. Thus, the A/C Hose, in conclusion, can be regarded as the improve of the efficiency and the safety factor, which are the stimulating factors within the continuous presence of the Dodge Viper.

Dodge Viper A/C Hose Parts and Q&A

Suction Hose
5264928AA
Q: How to Remove the A/C Hose Liquid Line on Dodge Viper?
A:
Start by separating and insulating the negative Battery Cable prior to taking out the A/C liquid line. Get rid of the refrigerant from the refrigeration system. After that, detach the air intake ducts attached to the front of the air cleaner assembly. Release the bolt that fastens the A/C liquid line to the right fender and the bolt attaching it to the A/C Condenser. Release the liquid line tank clamp at the A/C condenser and throw out the old O-ring seal. Let go of the nut that holds the A/C liquid line to the A/C Evaporator, take the line out of the evaporator and throw away the O-ring seal. Afterward, take out the A/C liquid line from the engine and close or cover the holes in the fittings and all the openings in the condenser and evaporator with plugs.
Suction Hose
68545796AA
Q: How to Properly Install and Service an A/C Hose Discharge Line on Dodge Viper?
A:
Ensure you have adjusted the oil level properly so that the A/C discharge line installation does not create problems for your system. Check the Refrigerant Oil Capacities chart to find out how much oil to install when using multiple replacement parts. Be sure to install new O-ring seals on the refrigerant line every time you take apart the connection, to prevent leaks from happening. Inject the A/C discharge line into the engine compartment and get rid of any tape or plugs you found on its fittings and the ports of the condenser and compressor. Get ready by putting clean r134a refrigerant oil on a new rubber O-ring seal, attach it to the case around the connection and make sure to use only O-ring seals and the specified r134a oil for this refrigerant in your vehicle's AC compressor. Screw bolt 2 into the A/C discharge line and the A/C compressor coupling together. Then tighten the bolt to 23 Nm (17 ft. lbs.). After that, attach the A/C discharge line to the A/C condenser and secure it with bolt 5, turning it to 18 Nm (13 ft. lbs.). Secure the A/C discharge line to the left frame rail with bolt 2 and make sure it is tight. Remove the broken or malfunctioning A/C pressure transducer, install a new one and tighten it well in the A/C discharge line. Glue or seal the wire harness connector onto the A/C pressure transducer, connect the air intake ducts to the front of the air cleaner box and fasten the negative Battery Cable as shown in the diagram. Empty the refrigerant, adjust the oil in the refrigerant system and fill it back up if needed.