How to Service and Repair an Alternator on Dodge Viper?

Make sure the negative battery cable is removed and then come out with the battery output wire, as back up safety is needed when servicing the alternator. Connectivity Cut off the positive battery cable where it attaches to the bullet connector by the power steering pump. Then, take out the two bolts on the generator bracket, shift the generator forward, unhook the field connector from the back of the generator and unplug the battery positive on the side. While installing, remove the unit the same way you did before. Then tighten the upper generator bolt to 55 Nm (41 ft. lbs.), the lower mounting bolt to 55 Nm (41 ft. lbs.) and the battery terminal nut to 8.5 Nm (75 in. lbs.). A screwdriver shouldn't be used to push a belt over the pulley rim as this may harm the belt and to keep the accessory drive belt working correctly, fit it without reversing it so the water pump does not rotate the wrong way and overload the engine.

How to Properly Install an Alternator Using a Decoupler Pulley on Dodge Viper?

Go ahead and install the alternator by hand first by threading the decoupler pulley onto the generator shaft clockwise. At this point, place Special Tool 8433 into the decoupler and make sure the tool is centered on the generator's hex shaft. To avoid problems, use either a dial or beam wrench since adjustable, ratchet "click" torque wrenches only measure torque in the clockwise direction. Place a torque of 110 Nm (81 ft. lbs) on the decoupler pulley in the indicated way. Tie the negative battery cable to the engine and tighten it with 10 Nm (90 in. lb) of torque after the generator is attached.

OEM Dodge Viper Alternator

Generator

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Alternators found

View related parts
Dodge Viper Alternator Part Number: 4848662AB
$243.60 MSRP: $301.00
You Save: $57.40 (20%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Alternator - Engine; Alternators; Generator Engine
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1997-2002 Dodge Viper | ACR, GT2, GTS, R/T-10 | 10 Cyl 8.0 L GAS
View related parts
Dodge Viper Alternator Part Number: 5037198AF
Product Specifications
- Other Name: Alternator, Engine; Generator Engine
- Replaces: 5037198AE
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2013-2017 Dodge Viper | ACR, Base, GT, GTC, GTS | 10 Cyl 8.4 L GAS, 8.4L V10
View related parts
Dodge Viper Alternator Part Number: 5037198AA
Product Specifications
- Other Name: Alternator - Engine; Alternators; Generator Engine
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2003-2006 Dodge Viper | SRT-10 | 10 Cyl 8.3 L GAS
View related parts
Dodge Viper Alternator Part Number: 5037198AC
Product Specifications
- Other Name: Alternator, Engine; Alternators; Generator Engine
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2008-2010 Dodge Viper | SRT-10, SRT-10 ACR | 10 Cyl 8.4 L GAS

Dodge Viper Alternator

Choose OEM Alternator that meet Dodge factory standards. Dodge designs and tests every component for precision and durability. Each Alternator follows strict manufacturing steps to lock in quality and fit. If your Dodge Viper matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Viper parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

Hence, the Alternator is one of the most significant parts that depict its reliability and performance and have a notable contribution to the operations of the Dodge Viper. This alternator plays the role of converting mechanical energy derived from the powerful Viper's engine into electrical energy to charge the vehicle's battery and enable all electrical components in the car function properly while the car is on the road. It fits different Viper models, and the Alternator optimizes both the rates of efficiency and protection against undercharging or overcharging, common in modern vehicles, which links the alternator's operations to the PCM. It supplies an alternating current and also rectifies it for the use in Vipers complex electrical work, more so with newer versions, which have a higher load drawing power from the electrical parts added. The single most important aspect that draws a clear line in the sand in terms of what separates the Alternator from relativity in the automotive market is the strength that has been given to it to serve high performance automobiles and still function at optimally. These characteristics guarantee that the Dodge Viper is on the list of desire of enthusiasts who adore both mighty and trustworthy vehicles. To sum up, the Alternator not only can help improve the performance of the car, but also strengthen the unique feelings of a Dodge Viper driver, which makes it become one of the critical components in Dodge Viper series.

Dodge Viper Alternator Parts and Q&A

Alternator
4848662AB
Q: How to Service and Repair an Alternator on Dodge Viper?
A:
Make sure the negative Battery Cable is removed and then come out with the battery output wire, as back up safety is needed when servicing the alternator. Connectivity Cut off the positive battery cable where it attaches to the bullet connector by the Power Steering Pump. Then, take out the two bolts on the generator bracket, shift the generator forward, unhook the field connector from the back of the generator and unplug the battery positive on the side. While installing, remove the unit the same way you did before. Then tighten the upper generator bolt to 55 Nm (41 ft. lbs.), the lower mounting bolt to 55 Nm (41 ft. lbs.) and the battery terminal nut to 8.5 Nm (75 in. lbs.). A screwdriver shouldn't be used to push a belt over the pulley rim as this may harm the belt and to keep the accessory Drive Belt working correctly, fit it without reversing it so the Water Pump does not rotate the wrong way and overload the engine.
Alternator
5037198AC
Q: How to Properly Install an Alternator Using a Decoupler Pulley on Dodge Viper?
A:
Go ahead and install the alternator by hand first by threading the decoupler pulley onto the generator shaft clockwise. At this point, place Special Tool 8433 into the decoupler and make sure the tool is centered on the generator's hex shaft. To avoid problems, use either a dial or beam wrench since adjustable, ratchet "click" torque wrenches only measure torque in the clockwise direction. Place a torque of 110 Nm (81 ft. lbs) on the decoupler pulley in the indicated way. Tie the negative Battery Cable to the engine and tighten it with 10 Nm (90 in. lb) of torque after the generator is attached.