Wipe away any old adhesive on the frame with a 3M Purple Scotch-Brite DISC or a similar clean and strip disc to make certain the panel won't corrode. Cover both edges of the carbon fiber on the lower frame with a thin bead of an appropriate adhesive from front to back, but avoid placing adhesive too close to the inboard edge of the fender support to avoid it squeezing out. The adhesive will solidify after 3 1/2 minutes of applying it. Come next, install the bolts and nuts and place the doors, power
Brake Booster, pedal assembly, HVAC housing, instrument panel and fender supports.