Start by unlocking the instrument panel center bezel and removing the connections from the cigar lighter,
Power Window Switch and rear window defogger switch if you have them. After that, remove the knee blockers from both the right and left areas of your seat. Pull up the headlamp switch knob lever from the center of the steering wheel and place a small wire, preferably a stiff one, into the hole beneath the knob. Push the wire up to release the lock on the lever while pulling the knob back slightly away from the steering wheel. Following this, take out the instrument panel bezel by not damaging the locking tab. Next, remove each of the two meter mounting screws, disconnect the wire connector after removing the meter. Reversing these steps will help with installation.