How to Install a Trunk Lid Lift Support Gas Prop on Dodge Viper?

Put the upper retaining clip completely into the ball socket when installing the gas prop for the trunk or liftgate shock support. After that, slide the support cylinder up over both ball studs so the thin end faces the body side, helping the upper retaining clip to lock into place. Finally, fully close the lower ball socket retaining clip.

How to Service Trunk Lid Lift Support on Dodge Viper?

When working on the trunk or liftgate support, start by lifting the decklid and holding it up with something. Use a little bent screwdriver (or other small flat tool) to lift the upper retaining clips while also pulling the ball socket away from the ball stud. After that, push the lower plastic clip up and take out the support cylinder. Make sure the upper retaining clip is all the way seated in the ball socket, next place the support cylinder over the ball studs with its thin end joining the body of the hinge and the upper retaining clip will click into place. Make sure to fully close the lower ball socket retaining clip at the end.

OEM Dodge Viper Trunk Lid Lift Support

Lift Strut Rod

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

5 Trunk Lid Lift Supports found

View related parts
Dodge Viper Lift Cylinder Part Number: 68252748AB
$33.81 MSRP: $50.35
You Save: $16.54 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Propeller/Gas - Liftgate; Back Glass Lift Support; Liftgate Lift Support; Door Lift Support; Lift Support; Propeller Liftgate
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2017 Dodge Viper | ACR, GTC, GTS | 10 Cyl 8.4 L GAS
View related parts
Dodge Viper Lift Cylinder Part Number: 68033127AA
$27.55 MSRP: $34.65
You Save: $7.10 (21%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Propeller/Gas - Liftgate; Hatch, Back Glass, Tailgate, and Door Lift Support.; Support Cylinder; Propeller Liftgate; Lift Support
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2008-2010 Dodge Viper | SRT-10, SRT-10 ACR | 10 Cyl 8.4 L GAS
View related parts
Dodge Viper Lift Cylinder, Rear Part Number: 4589610AA
$26.33 MSRP: $32.55
You Save: $6.22 (20%)
ADD TO CART
Product Specifications
- Other Name: Propeller/Gas - Decklid; Rear Lift Support; Trunk Lift Support; Tailgate Lift Support; Support Cylinder; Propeller Deck Lid; Lift Support
- Position: Rear
- Replaces: 4865981AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2008-2010 Dodge Viper | 8.4L V10
- 2003-2006 Dodge Viper | 8.3L V10
View related parts
Dodge Viper Lift Cylinder Part Number: 5030099AC
$23.06 MSRP: $34.65
You Save: $11.59 (34%)
ADD TO CART
Product Specifications
- Other Name: Propeller/Gas - Liftgate; Hatch, Back Glass, Tailgate, and Door Lift Support.; Support Cylinder; Propeller Liftgate; Lift Support
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2008-2010, 2006 Dodge Viper | SRT-10, SRT-10 ACR | 10 Cyl 8.3 L GAS, 10 Cyl 8.4 L GAS
View related parts
Dodge Viper Lift Cylinder Part Number: 68139828AB
$25.54 MSRP: $37.75
You Save: $12.21 (33%)
ADD TO CART
Product Specifications
- Other Name: Propeller/Gas - Liftgate; Hatch, Back Glass, Tailgate, and Door Lift Support.; Support Cylinder; Propeller Liftgate; Lift Support
- Replaces: 68139828AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2015-2017 Dodge Viper | ACR, Base, GT, GTC, GTS | 10 Cyl 8.4 L GAS
- 2013 Dodge Viper | 8.4L V10

Dodge Viper Trunk Lid Lift Support

Choose OEM Trunk Lid Lift Support that meet Dodge factory standards. Dodge designs and tests every component for precision and durability. Each Trunk Lid Lift Support follows strict manufacturing steps to lock in quality and fit. If your Dodge Viper matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Viper parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

Dodge Viper Trunk Lid Lift Support Parts and Q&A

Lift Cylinder
68033127AA
Q: How to Install a Trunk Lid Lift Support Gas Prop on Dodge Viper?
A:
Put the upper retaining clip completely into the ball socket when installing the gas prop for the trunk or liftgate shock support. After that, slide the support cylinder up over both ball studs so the thin end faces the body side, helping the upper retaining clip to lock into place. Finally, fully close the lower ball socket retaining clip.
Lift Cylinder, Rear
4589610AA
Q: How to Service Trunk Lid Lift Support on Dodge Viper?
A:
When working on the trunk or liftgate support, start by lifting the decklid and holding it up with something. Use a little bent screwdriver (or other small flat tool) to lift the upper retaining clips while also pulling the ball socket away from the ball stud. After that, push the lower plastic clip up and take out the support cylinder. Make sure the upper retaining clip is all the way seated in the ball socket, next place the support cylinder over the ball studs with its thin end joining the body of the hinge and the upper retaining clip will click into place. Make sure to fully close the lower ball socket retaining clip at the end.