How to Service a Turn Signal Switch on Dodge Viper?

To service the turn signal switch, first disconnect and isolate the battery negative cable. Remove the tilt steering column lever and the knee blocker/lower steering column trim panel. Next, take off both the upper and lower shrouds from the steering column, followed by the lower fixed column shroud. Loosen the steering column upper bracket nuts without removing them. Move the upper fixed column shroud to access the rear of the multi-function switch, then remove the tamper proof mounting screws using a tamper proof Torx Bit TTXR2OB2 or equivalent. Gently pull the switch away from the column, loosen the connector screw (which will remain in the connector), and disconnect the wire harness connector from the multi-function switch. For installation, reverse the procedures and tighten the fasteners to the specified torque: multi-function switch connector screw to 2 Nm (17 in. lbs.), multi-function switch retaining screws to 2 Nm (17 in. lbs.), and steering column upper bracket nuts to 12 Nm (110 in. lbs.).

OEM Dodge Viper Turn Signal Switch

Turn Signal Indicator Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Turn Signal Switches found

View related parts
Dodge Viper Multifunction Switch Part Number: 5035312AC
$85.02 MSRP: $129.00
You Save: $43.98 (35%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch - Multifunction; Combination Switch; Multi Purpose Switch; Switch Multifunction
- Replaces: 5035312AA, 5035312AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2013-2017 Dodge Viper | ACR, Base, GT, GTC, GTS | 10 Cyl 8.4 L GAS, 8.4L V10
View related parts
Dodge Viper Headlamp Switch Part Number: 5066185AA
$112.34 MSRP: $150.00
You Save: $37.66 (26%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch - Multifunction; Combination Switch; Multi Purpose Switch; Switch Multifunction
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2008-2010, 2003-2006 Dodge Viper | SRT-10, SRT-10 ACR | 10 Cyl 8.3 L GAS, 10 Cyl 8.4 L GAS
View related parts
Dodge Viper Ignition Switch Part Number: 4728424
Product Specifications
- Other Name: Switch - Multifunction; Turn Signal & Combination Lever; Steering Column Housing; Windshield Washer Switch.; Turn Signal Switch; Multifunction, Wiper, Headlamp Dimmer, Hazard, Signal & Tilt options.
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1997-2002 Dodge Viper | ACR, GT2, GTS, R/T-10 | 10 Cyl 8.0 L GAS
View related parts
Dodge Viper Turn Signal Switch Part Number: 56002011
Product Specifications
- Other Name: Switch - Turn Signal; Hazard Flasher Switch; Multi Purpose Switch; Signal Switch; Turn Signal & Hazard Switch; Switch, Directional; Switch, Turn Signal; Switch
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1992-1996 Dodge Viper | Base, GTS | 10 Cyl 8.0 L GAS

Dodge Viper Turn Signal Switch

Choose OEM Turn Signal Switch that meet Dodge factory standards. Dodge designs and tests every component for precision and durability. Each Turn Signal Switch follows strict manufacturing steps to lock in quality and fit. If your Dodge Viper matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Viper parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

Dodge Viper Turn Signal Switch Parts and Q&A

Ignition Switch
4728424
Q:
How to Service a Turn Signal Switch on Dodge Viper?
A:
To service the turn signal switch, first disconnect and isolate the battery negative cable. Remove the tilt steering column lever and the knee blocker/lower steering column trim panel. Next, take off both the upper and lower shrouds from the steering column, followed by the lower fixed column shroud. Loosen the steering column upper bracket nuts without removing them. Move the upper fixed column shroud to access the rear of the multi-function switch, then remove the tamper proof mounting screws using a tamper proof Torx Bit TTXR2OB2 or equivalent. Gently pull the switch away from the column, loosen the connector screw (which will remain in the connector), and disconnect the wire harness connector from the multi-function switch. For installation, reverse the procedures and tighten the fasteners to the specified torque: multi-function switch connector screw to 2 Nm (17 in. lbs.), multi-function switch retaining screws to 2 Nm (17 in. lbs.), and steering column upper bracket nuts to 12 Nm (110 in. lbs.).