How to Properly Install an Ignition Switch on Dodge Viper?

When installing the ignition switch, make sure it is set to RUN and the actuator shaft is in its housing. Lift the ignition switch up and put it in place, so it fits tightly over the retaining tabs and fix it firmly with a mounting screw. Link the electrical connectors to the ignition switch and then place the multi-function switch and screw it in place using the 2 screws. Now, fit the upper and lower shrouds and them install the key cylinder, with the cylinder retaining tab only depressed when the RUN position is engaged. Connect the negative battery cable and tighten it to 10 Nm (90 in. lbs.). After that, check that both the ignition switch and key-in warning switch are operating correctly.

How to Remove the Ignition Switch on Dodge Viper?

The first thing you should do is isolate the negative terminal on the battery with a wire by disconnecting it. Hold the key cylinder in the RUN position, then press down on the lock cylinder retaining tab through the hole under the lower shroud. After that, remove both shrouds covering the steering column and detach the electrical connections from the ignition switch. Remove the multi-function switch by unscrewing its top bolts and then using a #10 Torx(R) bit to get rid of the ignition switch mounting screw. In the end, pull the ignition switch out of the steering column.

OEM Dodge Viper Ignition Switch

Starter Ignition Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Ignition Switches found

View related parts
Dodge Viper Ignition Switch Part Number: 68299961AC
$81.86 MSRP: $127.00
You Save: $45.14 (36%)
ADD TO CART
Product Specifications
- Other Name: Module - Keyless Ignition Node; Power Switch; Start Button; Module Keyless Ignition Node
- Replaces: 68234376AA, 68299961AA, 68234376AC, 68299961AB, 68234376AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2015-2017 Dodge Viper | ACR, Base, GT, GTC, GTS | 10 Cyl 8.4 L GAS, 8.4L V10
View related parts
Dodge Viper Ignition Switch Part Number: 4685719AI
$67.84 MSRP: $94.40
You Save: $26.56 (29%)
ADD TO CART
Product Specifications
- Other Name: Switch - Ignition; Ignition Lock Cylinder; Ignition Cylinder; Switch Ignition
- Replaces: 4685719AC, 4685719AE, 4685719AD, 68033393AA, 4685719AH, 4685719AB, 4685719AG, 4685719AF
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2008-2010 Dodge Viper | 8.4L V10
- 2003-2006 Dodge Viper | 8.3L V10
View related parts
Dodge Viper Ignition Switch Part Number: 56021346AB
$214.14 MSRP: $315.00
You Save: $100.86 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch - Ignition
- Replaces: 56021346
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1992-2002 Dodge Viper | ACR, GT2, GTS, R/T-10 | 10 Cyl 8.0 L GAS, 8.0L V10
View related parts
Dodge Viper Ignition Switch Part Number: J3250575
Product Specifications
- Other Name: Switch - Ignition; Switch; Switch, Ignition Starter; Switch, Ignition Lock; Switch, Ignition
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1992-1996 Dodge Viper | Base, GTS | 10 Cyl 8.0 L GAS
View related parts
Dodge Viper Ignition Switch Part Number: 4865676AC
Product Specifications
- Other Name: Switch - Ignition; Switch Ignition
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2008-2010, 2003-2006 Dodge Viper | SRT-10, SRT-10 ACR | 10 Cyl 8.3 L GAS, 10 Cyl 8.4 L GAS
View related parts
Dodge Viper Ignition Lock Cylinder Part Number: 5161055AA
Product Specifications
- Other Name: None - Ignition Lock; Lock Cylinder; Cylinder & Keys
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1992-1996 Dodge Viper | Base, GTS | 10 Cyl 8.0 L GAS

Dodge Viper Ignition Switch

Choose OEM Ignition Switch that meet Dodge factory standards. Dodge designs and tests every component for precision and durability. Each Ignition Switch follows strict manufacturing steps to lock in quality and fit. If your Dodge Viper matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Viper parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

The Ignition Switch is one of the terrific parts that highlights the dependability and power of the remarkable Dodge Viper. Being a key component of the core ignition and charging system, the Ignition Switch initiates the engine starting and primary electrical systems in a Viper so that it will run efficiently. Being suitable for different Viper models, this Ignition Switch is being developed following the peculiarities of every modification, the usage of traditional key, or service of push-button start or a keyless start. The Ignition Switch not only improves the vehicle's acceleration and overall performance but also has a safety functionality; most of them are very easy to install and replace since they are plug and play. This relative ease of maintainability is a particular boon for those who own Vipers, as it means they are easy to diagnose and repair as needed. Also, the Ignition Switch is designed to have a high durability to enable it to serve because of the demanding nature that comes along the high performance cars. This is evident in the design and the features in the Ignition Switch which guarantees a strong performance and meet the expectations of the Viper. Finally, the Ignition Switch is not only an essential component; it represents the spirit of the Dodge Viper and contributes effectively to the function of the car as well as to its safety feature.

Dodge Viper Ignition Switch Parts and Q&A

Ignition Switch
4865676AC
Q: How to Properly Install an Ignition Switch on Dodge Viper?
A:
When installing the ignition switch, make sure it is set to RUN and the actuator shaft is in its housing. Lift the ignition switch up and put it in place, so it fits tightly over the retaining tabs and fix it firmly with a mounting screw. Link the electrical connectors to the ignition switch and then place the multi-function switch and screw it in place using the 2 screws. Now, fit the upper and lower shrouds and them install the key cylinder, with the cylinder retaining tab only depressed when the RUN position is engaged. Connect the negative Battery Cable and tighten it to 10 Nm (90 in. lbs.). After that, check that both the ignition switch and key-in warning switch are operating correctly.
Ignition Switch
4685719AI
Q: How to Remove the Ignition Switch on Dodge Viper?
A:
The first thing you should do is isolate the negative terminal on the battery with a wire by disconnecting it. Hold the key cylinder in the RUN position, then press down on the lock cylinder retaining tab through the hole under the lower shroud. After that, remove both shrouds covering the Steering Column and detach the electrical connections from the ignition switch. Remove the multi-function switch by unscrewing its top bolts and then using a #10 Torx(R) bit to get rid of the ignition switch mounting screw. In the end, pull the ignition switch out of the steering column.