Can You Replace the Hood Hinge Without Removing the Hood on Jeep Commander?

Replacing the hood hinges can be done without removing the hood, because each hinge can be changed individually. First, put a mark with a grease pencil on the hood's edge where the hood hinge will go. Apply support to the hood and remove the support cylinder from it. First, take out the bolts that connection the hood hinge to the front fender and then remove the bolts that connect the hood hinge to the hood. Hold the new hood hinge in place on the hood, matching the reference marks made earlier and bolt down the hinge, tightening the screws to 28 N.m (21 ft. lbs). After that, attach the bolts holding the hood hinge in place on the fender rail, making sure the alignment is correct and fasten these bolts to 12 N.m (9 ft.lbs). The final step is to install the support cylinder back in place and adjust the hood if that's needed.

How to install a hood hinge on Jeep Commander?

First, insert the hood hinge onto the hood, line up both using the marks you made previously, attach the hinge and tighten the bolts to 28 Nm (21 ft. lbs.). Next, attach the bolts that fix the hinge to the fender rail, keeping them straight with the marks and tighten them to 12 Nm (9 ft. lbs.). After that, attach the support cylinder to the booster. When needed, put the hood at the proper height on the hanger.

OEM Jeep Commander Hood Hinge

Hood Bracket Hinge

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Hood Hinges found

View related parts
Jeep Commander Hinge, Front Passenger Side Part Number: 55369114AD
$53.72 MSRP: $79.25
You Save: $25.53 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hinge - Hood; Hood Hinge, Front Right; Hinge Hood
- Position: Front Passenger Side
- Replaces: 55369114AB, 55369114AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2006-2010 Jeep Commander | 65th Anniversary Edition, Base, Limited, Overland, Sport | 3.7L V6, 4.7L V8, 5.7L V8, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS
View related parts
Jeep Commander Hinge, Front Driver Side Part Number: 55369115AD
$49.17 MSRP: $68.20
You Save: $19.03 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hinge - Hood; Hood Hinge, Front Left; Hinge Hood
- Position: Front Driver Side
- Replaces: 55369115AB, 55369115AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2006-2010 Jeep Commander | 65th Anniversary Edition, Base, Limited, Overland, Sport | 3.7L V6, 4.7L V8, 5.7L V8, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS

Jeep Commander Hood Hinge

Choose OEM Hood Hinge that meet Jeep factory standards. Jeep designs and tests every component for precision and durability. Each Hood Hinge follows strict manufacturing steps to lock in quality and fit. If your Jeep Commander matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Commander parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

A Jeep Commander Hood Hinge stands as one of the crucial components which affects the reliability steady operation of Jeep Commander automobiles. The Hood Hinge serves as the support system for the hood weight and allows drivers easy access to the engine while maintaining safety during Jeep Commander use. A Jeep Commander has two separate hood hinges mounted on both sides of the vehicle to maintain hood protection during closure which prevents undesired hood openings that threaten safety. These hinges weaken from normal usage so scheduled maintenance becomes necessary for reaching peak operation. Customers who own XK and 2022 Meridian Jeep Commander models can take advantage of this compatible hood hinge design because it works with all car variants. Those who want a hood hinge replacement will find it easy because the parts cost between $10 to $90 and maintain practicality in the vehicle. The main advantages of the car Hood Hinge stem from its tough design structure complemented by an easy installation protocol for fast maintenance and repair work. The car Hood Hinge excels in the automotive market through its reliable performance with convenient maintenance so the automaker emphasizes its safety and quality commitment in every model model.

Jeep Commander Hood Hinge Parts and Q&A

Hinge, Front Driver Side
55369115AD
Q: Can You Replace the Hood Hinge Without Removing the Hood on Jeep Commander?
A:
Replacing the hood hinges can be done without removing the hood, because each hinge can be changed individually. First, put a mark with a grease pencil on the hood's edge where the hood hinge will go. Apply support to the hood and remove the support cylinder from it. First, take out the bolts that connection the hood hinge to the front Fender and then remove the bolts that connect the hood hinge to the hood. Hold the new hood hinge in place on the hood, matching the reference marks made earlier and bolt down the hinge, tightening the screws to 28 N.m (21 ft. lbs). After that, attach the bolts holding the hood hinge in place on the fender rail, making sure the alignment is correct and fasten these bolts to 12 N.m (9 ft.lbs). The final step is to install the support cylinder back in place and adjust the hood if that's needed.
Hinge, Front Passenger Side
55369114AD
Q: How to install a hood hinge on Jeep Commander?
A:
First, insert the hood hinge onto the hood, line up both using the marks you made previously, attach the hinge and tighten the bolts to 28 Nm (21 ft. lbs.). Next, attach the bolts that fix the hinge to the fender rail, keeping them straight with the marks and tighten them to 12 Nm (9 ft. lbs.). After that, attach the support cylinder to the booster. When needed, put the hood at the proper height on the hanger.