How to Detach a Fender on Jeep Commander?

Before removing the fender, make a mark to show where it is and take off the wheel if that is required. After that, get the wheel liner off the car. If it makes the job easier, take out the front fascia. To take off the antenna, first unscrew the antenna mast (2) from the antenna body, then use an antenna nut wrench (Special Tool C-4816) to take off the antenna cap nut (1). Disconnect the antenna adapter (4) from the top of the fender and drop the antenna body (3) into the antenna mounting hole in the fender. Remove the front lower bolts (2), adjust the rocker panel as you see fit and remove the inner support rivet (3). After that, detach the rear lower bolts (4), the upper fender screws (1) and remove the fender (2) from the car.

How to Install a Fender and Antenna on Jeep Commander?

When placing the front fender, mount fender 2 on the body and lock it with only finger strength. Place the fender with the surrounding body panels and lines, then tighten all screws to 8.5 Nm (75 in. lbs.). Should you need to fit an antenna, push antenna body 3 up through the hole on the top of the fender and then clip on adapter 4 from above this hole. After putting on antenna cap nut 1 with an antenna nut wrench (Special Tool C-4816), install and attach mast 2 to the antenna body and carefully ensure no space is left between the mast and the antenna base. After that, attach front fascia 1, insert the wheel liner and put the wheel back in place if it was not there.

OEM Jeep Commander Fender

Wheel Fender

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Fenders found

View related parts
Jeep Commander Fender, Front Driver Side Part Number: 55369219AB
$399.76
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Fender - Front; Fender, Front Left; Fender Front
- Position: Front Driver Side
- Replaces: 55369219AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2006-2010 Jeep Commander | 65th Anniversary Edition, Base, Limited, Overland, Sport | 3.7L V6, 4.7L V8, 5.7L V8, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS
View related parts
Jeep Commander Fender, Front Passenger Side Part Number: 55369218AB
$399.76
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Fender - Front; Fender, Front Right; Fender Front
- Position: Front Passenger Side
- Replaces: 55369218AA, 68058484AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2006-2010 Jeep Commander | 65th Anniversary Edition, Base, Limited, Overland, Sport | 3.7L V6, 4.7L V8, 5.7L V8, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS

Jeep Commander Fender

Choose OEM Fender that meet Jeep factory standards. Jeep designs and tests every component for precision and durability. Each Fender follows strict manufacturing steps to lock in quality and fit. If your Jeep Commander matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Commander parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

The Jeep Commander Fender functions as an important vehicle feature that emphasizes the durable engineering design of all Commander models produced by Jeep. The Fender delivers legendary durability which protects the Jeep Commander against various hazards including rocks and bits of debris and protects it from incidents that improve both safety and operational performance. Both the XK and the 2022 Meridian Commander models can use the Fender as a protective attachment meant to shield their front and rear sections. The Jeep Commander receives double protection from vehicle damage while better aerodynamics occur because wind cannot impact the wheels. All aspects of the Jeep Commander receive blanket protection through the availability of front and rear versions for the Fender model. The V6 and V8 engine options available for Jeep vehicles reinforces why this fender corresponds to the brand's performance quality requirements. Its modern thetic minimizes tire debris ejections that protect car occupants together with walkers in the streets. Built with its powerful yet carefully engineered design the car Fender establishes itself as an essential product within automotive markets while reflecting the brand's dedication to develop superior products. So the Fender functions beyond protection to serve as an essential driving improvement feature in the the automaker model system.

Jeep Commander Fender Parts and Q&A

Fender, Front Driver Side
55369219AB
Q: How to Detach a Fender on Jeep Commander?
A:
Before removing the fender, make a mark to show where it is and take off the wheel if that is required. After that, get the wheel liner off the car. If it makes the job easier, take out the front fascia. To take off the Antenna, first unscrew the antenna mast (2) from the antenna body, then use an antenna nut wrench (Special Tool C-4816) to take off the antenna cap nut (1). Disconnect the antenna adapter (4) from the top of the fender and drop the antenna body (3) into the antenna mounting hole in the fender. Remove the front lower bolts (2), adjust the rocker panel as you see fit and remove the inner support rivet (3). After that, detach the rear lower bolts (4), the upper fender screws (1) and remove the fender (2) from the car.
Fender, Front Passenger Side
55369218AB
Q: How to Install a Fender and Antenna on Jeep Commander?
A:
When placing the front fender, mount fender 2 on the body and lock it with only finger strength. Place the fender with the surrounding body panels and lines, then tighten all screws to 8.5 Nm (75 in. lbs.). Should you need to fit an Antenna, push antenna body 3 up through the hole on the top of the fender and then clip on adapter 4 from above this hole. After putting on antenna cap nut 1 with an antenna nut wrench (Special Tool C-4816), install and attach mast 2 to the antenna body and carefully ensure no space is left between the mast and the antenna base. After that, attach front fascia 1, insert the wheel liner and put the wheel back in place if it was not there.