How to Install a Steering Shaft on Jeep Commander?

Center and lock the steering column module to prevent harm during the installation of the steering shaft. Bring the shaft upwards from the master cylinder by the top and move it past the brake lines. Fasten a pinch bolt at the higher part of the coupling to the column piece. Following that, you should put on the column access cover and hush panel. Take the nuts used for the intermediate shaft and put them on the bulkhead. Access the nuts underneath from the inner fender and on top from beside the master cylinder. Hold the intermediate shaft bearing nuts to the bracket and then place the intermediate shaft bearing bracket on the frame. Reattach the inner fender well of the left side, lower the car and insert the bolt at the bottom using a swivel long extension.

OEM Jeep Commander Steering Shaft

Steering Stem Shaft

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Steering Shafts found

View related parts
Jeep Commander Intermediate Shaft Part Number: 5057494AA
$601.22 MSRP: $877.00
You Save: $275.78 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Shaft - Steering Column Intermediat; Steering Shaft; Intermed Shaft; Shaft Steering Column Intermediate
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2008-2010 Jeep Commander | Limited, Overland, Sport | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS
View related parts
Jeep Commander Intermediate Shaft Part Number: 55197266AA
Product Specifications
- Other Name: Shaft - Intermediate; Steering Shaft; Intermed Shaft; Shaft Intermediate
- Replaces: 55197223AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2006-2007 Jeep Commander | 65th Anniversary Edition, Base, Limited, Overland, Sport | 3.7L V6, 4.7L V8, 5.7L V8, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS

Jeep Commander Steering Shaft

Choose OEM Steering Shaft that meet Jeep factory standards. Jeep designs and tests every component for precision and durability. Each Steering Shaft follows strict manufacturing steps to lock in quality and fit. If your Jeep Commander matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Commander parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

Jeep Commander Steering Shaft is an important component in the Jeep Commander vehicles because it helps to provide the needed wheel adjustments based on the driver's commands from the steering wheel as well as ensure maximum performance and safe driving for the jeep commander autos. The major role of the Steering Shaft is to link the steering wheel to the steering gearbox and due to the utmost reliability, it offers stability and response rate for better and ease driving experience. In stock intermediate, upper intermediate and lower Steering Shafts are offered, all highly durable as a result of the quality materials used in production. New to the Jeep Commander which has gone through many models after its introduction in 2005, is the hearty Steering Shaft that is reliable for the Jeep XK as well how the updated 2022 version. Another crucial differential element of the car is the Steering Shaft Since its primary use is to provide input to the steering system, any form of wear such as poor strearing, or strange sounds emanating from it is a safety concern. Steering Shaft is thus an area of the Jeep Commander that remains strong, and thus with it in good working condition, Jeep Commander can perform well, and thus be special in the market. Also, the Jeep Commander Steering Shaft is as important as the others because it ensures a safer road trip in addition to enhancing the efficiency of the automobile. The Jeep Commander Steering Shaft perfectly fits into the frame of the Jeep vehicles, thus providing both durability and high performance; moreover, being compatible with other attachment types, it stands as one of the brand's most vital components that guarantee customers the reliability of Jeep vehicles.

Jeep Commander Steering Shaft Parts and Q&A

Intermediate Shaft
55197266AA
Q: How to Install a Steering Shaft on Jeep Commander?
A:
Center and lock the steering column module to prevent harm during the installation of the steering shaft. Bring the shaft upwards from the master cylinder by the top and move it past the brake lines. Fasten a pinch bolt at the higher part of the coupling to the column piece. Following that, you should put on the column access cover and hush panel. Take the nuts used for the intermediate shaft and put them on the bulkhead. Access the nuts underneath from the inner fender and on top from beside the master cylinder. Hold the intermediate shaft bearing nuts to the bracket and then place the intermediate shaft bearing bracket on the frame. Reattach the inner fender well of the left side, lower the car and insert the bolt at the bottom using a swivel long extension.