How to Maintain the Power Steering Cooler for 3.7L and 4.7L Engines on Jeep Commander?

First, release the power steering fluid from the reservoir before servicing the Power Steering Fluid Cooler on 3.7L and 4.7L engines. After that, remove the weather-strip seal from the hood at the radiator cowl and then pull out the six grille push pins. Let go of the return hose from the reservoir on the cooler and disconnect the other return line from the steering gear. Afterwards, take the cooler out of the snap-in brackets and bring it, plus the hoses, out of the car.

What is the Installation Process for a Power Steering Cooler in 3.7L and 4.7L Engines on Jeep Commander?

Fasten the power steering cooler to the underside of the vehicle near the a/c condenser, clip the hoses onto it and make sure everything fits securely. Find and link the steering gear return line from the gear to the cooler and similarly reattach the reservoir return hose to the cooler. Fill up the tank with new power steering fluid and bleed it out. Touch the engine to check if it is leaking any oil. Install the grille using the six provided grille push pins, then place one end of the hood weather-strip seal onto the radiator cowl.

OEM Jeep Commander Power Steering Cooler

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Power Steering Coolers found

View related parts
Jeep Commander Power Steering Cooler, Front Part Number: 52090052AB
Product Specifications
- Other Name: Cooler - Power Steering; Power Steering Cooler, Front; Power Steering Oil Cooler; Cooler Power Steering
- Position: Front
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2006-2010 Jeep Commander | 65th Anniversary Edition, Base, Limited, Sport | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS
View related parts
Jeep Commander Power Steering Cooler, Front Part Number: 55116927AA
Product Specifications
- Other Name: Cooler - Power Steering; Power Steering Cooler, Front; Power Steering Hose; Power Steering Return Hose; Power Steering Oil Cooler; Cooler Power Steering
- Position: Front
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2006-2010 Jeep Commander | Limited, Overland, Sport | 8 Cyl 5.7 L GAS

Jeep Commander Power Steering Cooler

Choose OEM Power Steering Cooler that meet Jeep factory standards. Jeep designs and tests every component for precision and durability. Each Power Steering Cooler follows strict manufacturing steps to lock in quality and fit. If your Jeep Commander matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Commander parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

The Jeep Commander Power Steering Cooler is an important part that will improve on the force steering framework of the Jeep Commander autos. This cooler has a very important function to prevent the fluid of the power steering from overheating protecting system parts and ensuring smooth running. Normally fitted on the radiator support panel, Jeep Commander power steering cooler operates on a concept that is almost similar to that of a radiator with fin and tube type that is capable of acquiring heat from the fluid before and then passing it on to the air. A very smooth cooling system that saves time is very important for different Jeep Commander brands like the XK and the 2022 Meridian because it makes the steering smooth regardless of the engine. In the long run, problems like leakage or blocking may occur and these may lead to the reduced performance of the Jeep Commander Power Steering Cooler hence the need to perform maintenance at the right time. That is why the cooler is accustomed to maintaining the desired temperature of the power steering fluid, not only increasing the durability of the system but also affecting the driving performance. The Jeep Commander Power Steering Cooler is built to last and perfectly performs the intended function of cooling the power steering mechanism in the vehicles; this makes it to stand out in the market and readily serve the expectation of Jeep lovers. Finally, this component is a must-have especially for those who seek to achieve the prime performance and security of their Jeep Commander.

Jeep Commander Power Steering Cooler Parts and Q&A

Power Steering Cooler, Front
52090052AB
Q: How to Maintain the Power Steering Cooler for 3.7L and 4.7L Engines on Jeep Commander?
A:
First, release the power steering fluid from the reservoir before servicing the Power Steering Fluid Cooler on 3.7L and 4.7L engines. After that, remove the weather-strip seal from the hood at the radiator cowl and then pull out the six grille push pins. Let go of the return hose from the reservoir on the cooler and disconnect the other return line from the steering gear. Afterwards, take the cooler out of the snap-in brackets and bring it, plus the hoses, out of the car.
Power Steering Cooler, Front
55116927AA
Q: What is the Installation Process for a Power Steering Cooler in 3.7L and 4.7L Engines on Jeep Commander?
A:
Fasten the power steering cooler to the underside of the vehicle near the A/C Condenser, clip the hoses onto it and make sure everything fits securely. Find and link the steering gear return line from the gear to the cooler and similarly reattach the reservoir return hose to the cooler. Fill up the tank with new power steering fluid and bleed it out. Touch the engine to check if it is leaking any oil. Install the Grille using the six provided grille push pins, then place one end of the hood weather-strip seal onto the radiator cowl.