How to Install a Water Pump on a 3.7L Engine on Jeep Commander?

First, clear the gasket areas on the engine before installing the water pump. Install the ready-positioned gasket and water pump, then tighten the mounting bolts to a torque of 54 Nm (40 ft. lbs.) Maintain a distance between the impeller and the timing chain case to avoid friction. After installing the radiator lower hose, let go of the belt tensioner and put the drive belt on in such a way that the water pump will not rotate in the wrong way. Make sure the fan shroud is firmly attached to the radiator at both points and put in the screws that secure each attachment point. Make sure there is at least 25 mm (1.0 inches) of space between the fan's tip and the fan shroud. Add coolant to the system and link the negative battery cable after that. After that, start the engine and watch for any leaks.

How to Remove and Replace a Water Pump on a 3.7L Engine on Jeep Commander?

Before you begin, unlink the negative battery cable from the battery and correctly drain the cooling system. Always use proper tools to service constant tension hose clamps and never forget to put on safety glasses when you're working. Ensure all replacement constant tension clamps you use are marked with the same letter or number you find on the original ones. Subsequent to that, remove two screws that fasten the fan's shroud to the radiator as well as any viscous fan. After that, remove both the accessory drive belt and the tensioner. Afterward, unscrew all eight bolts, but be sure not to force them into the water pump when it's mounted at the timing chain case/cover. Then, take out the water pump and gasket and discard the gasket.

OEM Jeep Commander Water Pump

H2O Pump

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Water Pumps found

View related parts
Jeep Commander Water Pump Part Number: 53022189AH
$179.01 MSRP: $267.00
You Save: $87.99 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pump - Water; Engine Water Pump; Water Pump Assembly
- Replaces: 53022189AC, 53022189AD, 53022189AF, 5179734AA, 53021187AA, 53022058AA, 53022189AB, 53022189AA, 53022189AG
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2006-2010 Jeep Commander | 65th Anniversary Edition, Base, Limited, Sport | 3.7L V6, 4.7L V8, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS
View related parts
Jeep Commander Water Pump Part Number: 53022095AJ
Product Specifications
- Other Name: Pump - Water; Engine Water Pump; Water Pump Assembly
- Replaces: 53022095AF
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2009-2010 Jeep Commander | Limited, Overland, Sport | 5.7L V8, 8 Cyl 5.7 L GAS
View related parts
Jeep Commander Pump - Water Part Number: 68670653AA
$193.66 MSRP: $284.00
You Save: $90.34 (32%)
Product Specifications
- Other Name: PUMP-WATER
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2006-2008 Jeep Commander | Limited, Overland | 5.7L V8, 8 Cyl 5.7 L GAS

Jeep Commander Water Pump

Choose OEM Water Pump that meet Jeep factory standards. Jeep designs and tests every component for precision and durability. Each Water Pump follows strict manufacturing steps to lock in quality and fit. If your Jeep Commander matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Commander parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

Water Pump plays a crucial role of enhancing the capability and durability of Jeep Commander automobiles. The primary of this aspect is to pump water coolant through the jackets of the engine in order to eliminate heat produced at the time of combustion to maintain its performance. Water Pump is suitable for several Commander vehicles including the XK and jeep 2022 Meridian hence it can work well for any Jeep lover. This it has transformed from the original cast iron material to light weight aluminum material to maximize its performance. For instance, a contemporary Water Pump can be electric, which means that the cooling operation is no longer directly related to the RPM of the car's motor - this reduces both the energy waste and the size of the parasitic load. This particular innovation I think is of great importance especially in high performance uses because they offer better heat dissipation and therefore keeping the engine cool when in use. The Water Pump helps in improving the performance of the vehicle besides contributing to improving safety in any way the vehicle may overheat, seriously damaging the engine in the process. The Water Pump can be considered when it comes to constructions boasts and sophisticated features, which is quite vital for Jeep owners. From driving through the city roads to rough terrains, this Water Pump is crucial to the vehicle's performance for the safe and proper undertaking of every trip. Therefore, the Water Pump can be recommended as the optimal one to choose while being associated with the top quality and perfect characteristics of the Jeep Commander car.

Jeep Commander Water Pump Parts and Q&A

Water Pump
53022189AH
Q: How to Install a Water Pump on a 3.7L Engine on Jeep Commander?
A:
First, clear the gasket areas on the engine before installing the water pump. Install the ready-positioned gasket and water pump, then tighten the mounting bolts to a torque of 54 Nm (40 ft. lbs.) Maintain a distance between the impeller and the timing chain case to avoid friction. After installing the radiator lower hose, let go of the Belt Tensioner and put the Drive Belt on in such a way that the water pump will not rotate in the wrong way. Make sure the fan shroud is firmly attached to the radiator at both points and put in the screws that secure each attachment point. Make sure there is at least 25 mm (1.0 inches) of space between the fan's tip and the fan shroud. Add coolant to the system and link the negative Battery Cable after that. After that, start the engine and watch for any leaks.
Water Pump
53022095AJ
Q: How to Remove and Replace a Water Pump on a 3.7L Engine on Jeep Commander?
A:
Before you begin, unlink the negative Battery Cable from the battery and correctly drain the cooling system. Always use proper tools to service constant tension hose clamps and never forget to put on safety glasses when you're working. Ensure all replacement constant tension clamps you use are marked with the same letter or number you find on the original ones. Subsequent to that, remove two screws that fasten the fan's shroud to the radiator as well as any viscous fan. After that, remove both the accessory Drive Belt and the tensioner. Afterward, unscrew all eight bolts, but be sure not to force them into the water pump when it's mounted at the timing chain case/cover. Then, take out the water pump and gasket and discard the gasket.