How to Detach a Fender on Jeep Grand Cherokee?

Before removing the front fender, first put marks where it is located. If required, remove the wheel and after that remove the wheel liner. Remove the front fascia in the next step by studying the Front Bumper instructions. After the lower mounting bolts are off, loosen the cover over the rocker panel, if needed. After the fastening bolts are removed, take out the rear lower mounting bolts and remove the upper fender mounting bolts. In the end, unclip the fender from the vehicle.

How to Remove and Install a Fender Front Fender on Jeep Grand Cherokee?

First, use a grease pencil to show where the front fender sits, then remove the fender liner. Take away the screws holding the fender to the fascia, then remove the screws on the lower fender bracket behind the fascia. Following this, unscrew any bolts holding the fender to the rocker and the screws that hold the rear of the fender to the brackets attached to the A-pillar on the driver's side. Lift the hood and take out the screw under the hood hinge that fastens the fender to the rail in the engine compartment and then undo the rest of the screws that link the fender to that rail. When the fender is the only type being replaced, don't forget to remove the radio antenna before removing the fender from the body. Install the fender onto the body and, if your vehicle has one, mount the radio antenna. Use your fingers to tighten the screws in place, position the fender with the body panels and guide marks and tighten the screws to 12 N.m (9 ft. lbs.). As the last step, install the inner fender liner.

OEM Jeep Grand Cherokee Fender

Wheel Fender

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

11 Fenders found

View related parts
Jeep Grand Cherokee Fender, Front Driver Side Part Number: 55394451AB
$123.50 MSRP: $182.00
You Save: $58.50 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Fender - Front; Fender, Front Left; Fender Front
- Position: Front Driver Side
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2005-2010 Jeep Grand Cherokee | 65th Anniversary Edition, Laredo, Limited, Overland, SRT8 | 6 Cyl 3.0 L DIESEL, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS
View related parts
Jeep Grand Cherokee Fender, Front Passenger Side Part Number: 55135900AC
$410.28
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Fender - Front; Fender, Front Right; Fender Front
- Position: Front Passenger Side
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1999-2004 Jeep Grand Cherokee | Laredo, Limited, Overland, Special Edition, Sport | 6 Cyl 4.0 L GAS, 8 Cyl 4.7 L GAS
View related parts
Jeep Grand Cherokee Fender, Front Passenger Side Part Number: 55394450AB
$132.56 MSRP: $195.00
You Save: $62.44 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Fender - Front; Fender, Front Right; Fender Front
- Position: Front Passenger Side
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2005-2010 Jeep Grand Cherokee | 65th Anniversary Edition, Laredo, Limited, Overland, SRT8 | 6 Cyl 3.0 L DIESEL, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS
View related parts
Jeep Grand Cherokee Fender, Front Driver Side Part Number: 55369597AG
$320.64 MSRP: $473.00
You Save: $152.36 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Panel - Fender; Fender, Front Left
- Position: Front Driver Side
- Replaces: 55369597AE, 55369597AD, 55369597AC, 55369597AB, 55369597AF
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2011-2021 Jeep Grand Cherokee | 75th Anniversary, 80th Anniversary, Altitude, High Altitude, Laredo, Laredo E, Laredo X, Limited, Limited X, Overland, Overland Summit, SRT, SRT8, Summit, Trackhawk, Trailhawk, Upland | 3.0L V6, 3.6L V6, 5.7L V8, 6 Cyl 3.0 L DIESEL, 6 Cyl 3.6 L FLEX, 6.2L V8, 6.4L V8, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 6.4 L GAS
View related parts
Jeep Grand Cherokee Fender Part Number: 55369596AG
$320.64 MSRP: $473.00
You Save: $152.36 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Panel - Fender
- Replaces: 55369596AF, 55369596AA, 55369596AB, 55369596AC, 55369596AE, 55369596AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2011-2021 Jeep Grand Cherokee | 75th Anniversary, 80th Anniversary, Altitude, High Altitude, Laredo, Laredo E, Laredo X, Limited, Limited X, Overland, Overland Summit, SRT, SRT8, Summit, Trackhawk, Trailhawk, Upland | 3.0L V6, 3.6L V6, 5.7L V8, 6 Cyl 3.0 L DIESEL, 6 Cyl 3.6 L FLEX, 6.2L V8, 6.4L V8, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 6.4 L GAS
View related parts
Jeep Grand Cherokee Fender, Front Part Number: 68360215AD
$441.97 MSRP: $644.00
You Save: $202.03 (32%)
ADD TO CART
Product Specifications
- Other Name: Fender - Front
- Position: Front
- Replaces: 68360215AC, 68360215AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2022-2025 Jeep Grand Cherokee | 30th Anniversary 4xe, 4xe, Anniversary Edition 4xe | 4 Cyl 2.0 L PLUG-IN HYBRID EV-GAS (PHEV)
View related parts
Jeep Grand Cherokee Fender - Front Part Number: 68465272AD
$458.00 MSRP: $669.00
You Save: $211.00 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: FENDER-FRONT
- Position: Front
- Replaces: 68465272AC, 68465272AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2022-2025 Jeep Grand Cherokee | 30th Anniversary 4xe, 4xe, Altitude, Altitude X, Anniversary Edition 4xe, Laredo, Laredo X, Limited, Overland, Summit, Summit Reserve, Trailhawk | 2.0L L4, 3.6L V6, 4 Cyl 2.0 L PLUG-IN HYBRID EV-GAS (PHEV), 5.7L V8, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 8 Cyl 5.7 L GAS
View related parts
Jeep Grand Cherokee Fender - Front Part Number: 68465273AD
$518.69 MSRP: $756.00
You Save: $237.31 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: FENDER-FRONT
- Position: Front
- Replaces: 68465273AC, 68465273AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2022-2025 Jeep Grand Cherokee | 30th Anniversary 4xe, 4xe, Altitude, Altitude X, Laredo, Laredo X, Limited, Overland, Summit, Summit Reserve, Trailhawk | 2.0L L4, 3.6L V6, 5.7L V8, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 8 Cyl 5.7 L GAS
View related parts
Jeep Grand Cherokee Fender Part Number: 55031835
Product Specifications
- Other Name: Fender, Right
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1993-1998 Jeep Grand Cherokee | 5.9 Limited, Base, Laredo, Limited, Orvis, SE, TSi | 6 Cyl 4.0 L GAS, 8 Cyl 5.2 L GAS, 8 Cyl 5.9 L GAS
View related parts
Jeep Grand Cherokee Fender, Front Driver Side Part Number: 55135901AC
Product Specifications
- Other Name: Fender - Front; Fender, Front Left; Fender Front
- Position: Front Driver Side
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1999-2004 Jeep Grand Cherokee | Laredo, Limited, Overland, Special Edition, Sport | 6 Cyl 4.0 L GAS, 8 Cyl 4.7 L GAS
View related parts
Jeep Grand Cherokee Fender Part Number: 55031834
Product Specifications
- Other Name: Fender, Right
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1993-1998 Jeep Grand Cherokee | 5.9 Limited, Base, Laredo, Limited, Orvis, SE, TSi | 6 Cyl 4.0 L GAS, 8 Cyl 5.2 L GAS, 8 Cyl 5.9 L GAS

Jeep Grand Cherokee Fender

Choose OEM Fender that meet Jeep factory standards. Jeep designs and tests every component for precision and durability. Each Fender follows strict manufacturing steps to lock in quality and fit. If your Jeep Grand Cherokee matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Grand Cherokee parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

Jeep Grand Cherokee Fender Parts and Q&A

Fender, Front Driver Side
55394451AB
Q: How to Detach a Fender on Jeep Grand Cherokee?
A:
Before removing the front fender, first put marks where it is located. If required, remove the wheel and after that remove the wheel liner. Remove the front fascia in the next step by studying the Front Bumper instructions. After the lower mounting bolts are off, loosen the cover over the rocker panel, if needed. After the fastening bolts are removed, take out the rear lower mounting bolts and remove the upper fender mounting bolts. In the end, unclip the fender from the vehicle.
Fender, Front Passenger Side
55135900AC
Q: How to Remove and Install a Fender Front Fender on Jeep Grand Cherokee?
A:
First, use a grease pencil to show where the front fender sits, then remove the fender liner. Take away the screws holding the fender to the fascia, then remove the screws on the lower fender bracket behind the fascia. Following this, unscrew any bolts holding the fender to the rocker and the screws that hold the rear of the fender to the brackets attached to the A-pillar on the driver's side. Lift the hood and take out the screw under the Hood Hinge that fastens the fender to the rail in the engine compartment and then undo the rest of the screws that link the fender to that rail. When the fender is the only type being replaced, don't forget to remove the radio Antenna before removing the fender from the body. Install the fender onto the body and, if your vehicle has one, mount the radio antenna. Use your fingers to tighten the screws in place, position the fender with the body panels and guide marks and tighten the screws to 12 N.m (9 ft. lbs.). As the last step, install the inner fender liner.