How to Service the Intake Manifold Temperature Sensor in a 3.7L Engine on Jeep Grand Cherokee?

The first step to servicing the IMT sensor in the 3.7L engine is to unplug its electrical connector. Afterward, remove any dirt inside the air inlet tube at the sensor's base. After that, press the little plastic piece to release it and turn the sensor one-quarter turn counter-clockwise to remove it. Make sure the sensor ring is in good condition as well.

How to Remove and Install the Intake Manifold Temperature Sensor on Jeep Grand Cherokee?

The air inlet tube houses the temperature sensor of the engine's intake manifold. First, disconnect the electrical connector from the IMT sensor and next clean the air inlet tube around the sensor. Twist the sensor 1/4 turn to the left while holding the small plastic tab and remove it, inspecting the sensor O-ring. When installing, inspect the sensor O-ring and wipe clean the hole where the sensor will be fitted in the intake manifold. Attach the sensor to the intake manifold and let the rotating go all the way, until you hear it click at the release tab, then attach the electrical cord.

OEM Jeep Grand Cherokee Intake Manifold Temperature Sensor

Air Intake Temperature Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

9 Intake Manifold Temperature Sensors found

View related parts
Jeep Grand Cherokee Temperature Sensor Part Number: 56028364AA
$38.57 MSRP: $55.45
You Save: $16.88 (31%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Air Temperature; Air Charge Temperature Sensor; Air Temperature Sensor; Ambient Temperature Sensor; Air Intake Temperature Sensor; Duct Air Temperature Sensor.
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2001-2010 Jeep Grand Cherokee | 65th Anniversary Edition, Laredo, Limited, Overland, Special Edition, Sport | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L GAS
View related parts
Jeep Grand Cherokee Air Temperature Sensor Part Number: 5269756
$43.72 MSRP: $72.20
You Save: $28.48 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Air Charge Temperature; Air Charge Temperature Sensor; Intake Air Temperature Sensor; Air Intake Temperature Sensor; 4.0-5.2 Engine; ABS Front Wheel Right; Air Charge Temperature Sensor
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1993-1996 Jeep Grand Cherokee | Base, Laredo, Limited, Orvis, SE | 4.0L L6, 5.2L V8, 6 Cyl 4.0 L GAS
View related parts
Jeep Grand Cherokee Intake Air Temperature Sensor Part Number: 68211210AA
$324.04 MSRP: $482.00
You Save: $157.96 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Air Temperature; Air Charge Temperature Sensor; Air Temperature Sensor; Air Intake Temperature Sensor; Sensor Air Temperature
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2014-2019 Jeep Grand Cherokee | High Altitude, Limited, Overland, Summit, Trailhawk | 6 Cyl 3.0 L DIESEL
View related parts
Jeep Grand Cherokee Temperature Sensor Part Number: 4606487AB
$67.13 MSRP: $99.05
You Save: $31.92 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Charge Air Temperature; Air Charge Temperature Sensor; Intake Air Temperature Sensor; Air Temperature Sensor; Air Intake Temperature Sensor; Charge Temperature Sensor; Sensor; Sensor Charge Air Temperature
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2006-2007 Jeep Grand Cherokee | SRT8 | 8 Cyl 6.1 L GAS
View related parts
Jeep Grand Cherokee Mass Air Flow Sensor Part Number: 5149182AB
$31.67 MSRP: $46.95
You Save: $15.28 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Air Temperature; Air Charge Temperature Sensor; Intake Air Temperature Sensor; Air Temperature Sensor; Temperature Sensor; Air Intake Temperature Sensor; Sensor Air Temperature
- Replaces: 5149182AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2011-2022 Jeep Grand Cherokee | 4xe, 75th Anniversary, 80th Anniversary, Altitude, High Altitude, Laredo, Laredo E, Laredo X, Limited, Limited X, Overland, Overland Summit, Summit, Summit Reserve, Trailhawk, Upland | 4 Cyl 2.0 L PLUG-IN HYBRID EV-GAS (PHEV), 6 Cyl 3.6 L FLEX, 8 Cyl 5.7 L GAS
View related parts
Jeep Grand Cherokee Temperature Sensor Part Number: 5149279AC
$29.76 MSRP: $44.40
You Save: $14.64 (33%)
ADD TO CART
Product Specifications
- Other Name: Sensor - Charge Air Temperature; Intake Air Temperature; Mass Air Flow Sensor; MAP Sensor; Pressure Sensor; Air Mass Sensor; Air Intake Temperature Sensor; Charge Air Temperature Sensor.
- Replaces: 5149279AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2011-2025 Jeep Grand Cherokee | 30th Anniversary 4xe, 4xe, Altitude, Altitude X, Anniversary Edition 4xe, High Altitude, Laredo, Laredo X, Limited, Limited X, Overland, Overland Summit, SRT, SRT8, Summit, Summit Reserve, Trackhawk, Trailhawk | 4 Cyl 2.0 L PLUG-IN HYBRID EV-GAS (PHEV), 5.7L V8, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6.4L V8, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 6.4 L GAS
View related parts
Jeep Grand Cherokee Air Temperature Sensor Part Number: 56027872
$38.87 MSRP: $57.85
You Save: $18.98 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Air Temperature; Engine Intake Manifold Temperature Sensor; Intake Air Temperature Sensor; Air Intake Temperature Sensor; Temperature Sending Unit; Sensor Ambient Temperature; Sensor Air Temperature
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1997-2004 Jeep Grand Cherokee | 5.9 Limited, Laredo, Limited, Orvis, Special Edition, Sport, TSi | 6 Cyl 4.0 L GAS, 8 Cyl 5.2 L GAS, 8 Cyl 5.9 L GAS
View related parts
Jeep Grand Cherokee Temperature Sensor Part Number: 68542632AA
$11.12 MSRP: $16.45
You Save: $5.33 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Air Temperature; A/C Evaporator Temperature Sensor; Air Temperature Sensor; Thermostatic Switch
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2022-2025 Jeep Grand Cherokee | 30th Anniversary 4xe, 4xe, Altitude, Altitude X, Anniversary Edition 4xe, Laredo, Laredo X, Limited, Overland, Summit, Summit Reserve, Trailhawk | 4 Cyl 2.0 L PLUG-IN HYBRID EV-GAS (PHEV), 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 8 Cyl 5.7 L GAS
View related parts
Jeep Grand Cherokee Air Temperature Sensor Part Number: 68068747AC
$41.78 MSRP: $60.95
You Save: $19.17 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Coolant Temperature; Engine Coolant Temperature; Air Charge Temperature Sensor; Intake Air Temperature Sensor; Air Intake Temperature Sensor
- Replaces: 5175764AA, 68068747AA, 68068747AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2009 Jeep Grand Cherokee | Laredo, Limited, Overland | 3.0L V6, 6 Cyl 3.0 L DIESEL

Jeep Grand Cherokee Intake Manifold Temperature Sensor

Choose OEM Intake Manifold Temperature Sensor that meet Jeep factory standards. Jeep designs and tests every component for precision and durability. Each Intake Manifold Temperature Sensor follows strict manufacturing steps to lock in quality and fit. If your Jeep Grand Cherokee matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Grand Cherokee parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

The Intake Manifold Temperature Sensor of Jeep Grand Cherokee is incredibly important for regulation of the temperature of the air that enters the engine. This information is communicated to the PCM and the fuel injector timing is changed to get the correct air/fuel mixture for correct combustion. There are numerous Intake Manifold Temperature Sensors which have been used in many Grand Cherokee generations; electronics sensors include Mass Air Flow (MAF) sensors and the Velocity Air Flow (VAF) sensors. The only main difference is the way they work or measure the airflow; while MAF sensors measure the amount of air that gets into the engine, VAF sensors measure the speed of the air. Both are necessary for the correct air fuel mixture but calibration and tuning of the systems and their compliance with changes in tuning can be problematic.

Jeep Grand Cherokee Intake Manifold Temperature Sensor Parts and Q&A

Temperature Sensor
4606487AB
Q: How to Service the Intake Manifold Temperature Sensor in a 3.7L Engine on Jeep Grand Cherokee?
A:
The first step to servicing the IMT sensor in the 3.7L engine is to unplug its electrical connector. Afterward, remove any dirt inside the air inlet tube at the sensor's base. After that, press the little plastic piece to release it and turn the sensor one-quarter turn counter-clockwise to remove it. Make sure the sensor ring is in good condition as well.
Temperature Sensor
56028364AA
Q: How to Remove and Install the Intake Manifold Temperature Sensor on Jeep Grand Cherokee?
A:
The air inlet tube houses the temperature sensor of the engine's Intake Manifold. First, disconnect the electrical connector from the IMT sensor and next clean the air inlet tube around the sensor. Twist the sensor 1/4 turn to the left while holding the small plastic tab and remove it, inspecting the sensor O-ring. When installing, inspect the sensor O-ring and wipe clean the hole where the sensor will be fitted in the intake manifold. Attach the sensor to the intake manifold and let the rotating go all the way, until you hear it click at the release tab, then attach the electrical cord.