How to Properly Clean and Inspect Rocker Arm Components on Jeep Grand Cherokee?

Administratively cleaning the items and blowing air through the oil pathways in the rocker arms and push rods will help. Look at the pivot area on every rocker arm and change any that have scratches, holes, cracks or appear to be worn down. Examine the contact area at the end of the valve stem tip on every rocker arm and swap out any parts that are seriously pitted. Inspect each push rod end for signs of extra wear; remove and replace those that are worn and look at the related hydraulic tappet for extra signs of wear as well. Look at the push rods on a smooth surface and be sure they are straight or use a light to check for a groove on the rod between the rod and the flat material; an uneven wear pattern indicates an issue, so test the engine cylinder head for any clogging.

How to Maintain and Fix a Rocker Arm on Jeep Grand Cherokee?

The rocker arm assembly can be serviced and repaired by removing the engine cylinder head cover first. Review the rocker arm bridges to make sure they aren't interfering with the correct valve position. After that, unscrew the capscrews on the bridges and pivots, alternating between each side so you don't harm the bridges. Lift out the bridges, pivots and matching rocker arms and line them up on a bench in the same order you found them. Withdraw the push rods and place them side by side on the bench in the arrangement they were in the set. Apply some Mopar Engine Oil Supplement to each ball end of the push rods, insert the push rods into where they were originally and make sure the bottoms are lined up with the tappet plunger cap seat. Use Mopar Engine Oil Supplement or an equal on the rocker arm surface where it contacts the pivot, install them above each cylinder and then put the bridge above them. Screw the capscrews loosely into the bridges to start with and then tighten each one at a bridge by a single turn to avoid harm and torque them to 28 Nm (21 ft. lbs.). In the last step, put the engine cylinder head cover back on.

OEM Jeep Grand Cherokee Rocker Arm

Engine Rocker Arm

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

13 Rocker Arms found

View related parts
Jeep Grand Cherokee Rocker Arms Part Number: 53020742AC
$33.86 MSRP: $44.05
You Save: $10.19 (24%)
ADD TO CART
Product Specifications
- Other Name: Arm - Valve; Rocker Arm; Rocker Arm Valve
- Replaces: 68045794AA, 53021913AB, 53020742AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1999-2010 Jeep Grand Cherokee | 65th Anniversary Edition, Laredo, Limited, Overland, Special Edition, Sport | 3.7L V6, 4.7L V8, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS
View related parts
Jeep Grand Cherokee Rocker Arms Part Number: 5047896AD
$85.12 MSRP: $129.00
You Save: $43.88 (35%)
ADD TO CART
Product Specifications
- Other Name: Arm - Valve; Rocker Arm; Rocker Arm Valve Intake Valve; Rocker Arm Valve Intake; Rocker Arm Valve
- Replaces: 5047896AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2016-2024 Jeep Grand Cherokee | 75th Anniversary, Altitude, Altitude X, High Altitude, Laredo, Laredo E, Laredo X, Limited, Limited X, Overland, Summit, Summit Reserve, Trailhawk, Upland | 3.6L V6, 6 Cyl 3.6 L FLEX
View related parts
Jeep Grand Cherokee Rocker Arms Part Number: 53021552AB
$152.96 MSRP: $227.00
You Save: $74.04 (33%)
ADD TO CART
Product Specifications
- Other Name: Arm - Intake; Rocker Arm; Intake Rocker Arm; Rocker Arm Intake
- Replaces: 53021552AA, 68060343AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2005-2022 Jeep Grand Cherokee | High Altitude, Laredo, Limited, Limited X, Overland, Overland Summit, SRT, SRT8, Summit, Summit Reserve, Trackhawk, Trailhawk | 5.7L V8, 6.1L V8, 6.4L V8, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 6.4 L GAS
View related parts
Jeep Grand Cherokee Rocker Arms Part Number: 5175441AA
$26.56 MSRP: $39.15
You Save: $12.59 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Rocker Arm - Inlet And Exhaust Valve; Rocker Arm Inlet And Exhaust Valve; Rocker Arm
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2008 Jeep Grand Cherokee | Laredo, Limited, Overland | 6 Cyl 3.0 L DIESEL
View related parts
Jeep Grand Cherokee Rocker Arms Part Number: 53008282
$33.17 MSRP: $48.95
You Save: $15.78 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Arm - Valve; Rocker Arm; Rocker Arm Valve; Rocker, Valve
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1993-1998 Jeep Grand Cherokee | 5.9 Limited, Base, Laredo, Limited, Orvis, SE, TSi | 8 Cyl 5.2 L GAS, 8 Cyl 5.9 L GAS
View related parts
Jeep Grand Cherokee Rocker Arms Part Number: 53021553AB
$151.61 MSRP: $227.00
You Save: $75.39 (34%)
ADD TO CART
Product Specifications
- Other Name: Arm - Exhaust; Rocker Arm; Exhaust Rocker Arms; Rocker Arm Exhaust
- Replaces: 53021553AA, 68060344AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2005-2022 Jeep Grand Cherokee | High Altitude, Laredo, Limited, Limited X, Overland, Overland Summit, SRT, SRT8, Summit, Summit Reserve, Trackhawk, Trailhawk | 5.7L V8, 6.1L V8, 6.4L V8, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 6.4 L GAS
View related parts
Jeep Grand Cherokee Rocker Arms Part Number: 5184296AH
$16.24 MSRP: $23.45
You Save: $7.21 (31%)
ADD TO CART
Product Specifications
- Other Name: Arm - Valve; Rocker Arm; Rocker Arm Valve
- Replaces: 5184296AG, 5184296AD, 5184296AE, 5184296AF
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2011-2017 Jeep Grand Cherokee | Laredo, Limited, Overland, Overland Summit, Summit | 3.6L V6, 6 Cyl 3.6 L FLEX
View related parts
Jeep Grand Cherokee Rocker Arms Part Number: 68147405AA
$32.60 MSRP: $48.05
You Save: $15.45 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Arm - Valve; Rocker Arm; Rocker Arm Valve
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2014-2019 Jeep Grand Cherokee | High Altitude, Limited, Overland, Summit, Trailhawk | 6 Cyl 3.0 L DIESEL
View related parts
Jeep Grand Cherokee Rocker Pivot Part Number: 53008283
$14.57
ADD TO CART
Product Specifications
- Other Name: Arm - Rocker Arm; Rocker Arm Pivot; Pivot, Rocker Arm; Pivot Rocker Arm
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1993-1998 Jeep Grand Cherokee | 5.9 Limited, Base, Laredo, Limited, Orvis, SE, TSi | 8 Cyl 5.2 L GAS, 8 Cyl 5.9 L GAS
View related parts
Jeep Grand Cherokee Rocker Arms Part Number: 68245463AA
$14.82 MSRP: $22.10
You Save: $7.28 (33%)
ADD TO CART
Product Specifications
- Other Name: Arm - Includes Lash Adjuster; Rocker Arm; Rocker Arm Assembly Includes Lash Adjuster Exhaust Valve
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2016-2024 Jeep Grand Cherokee | 75th Anniversary, Altitude, Altitude X, High Altitude, Laredo, Laredo E, Laredo X, Limited, Limited X, Overland, Summit, Summit Reserve, Trailhawk, Upland | 6 Cyl 3.6 L FLEX
View related parts
Jeep Grand Cherokee Rocker Arms Part Number: 5048711AA
$14.25 MSRP: $21.00
You Save: $6.75 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Arm - Valve; Rocker Arm; Rocker Arm Valve Exhaust; Rocker Arm Valve Intake
- Replaces: 5047228AB, 5047228AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2022-2024 Jeep Grand Cherokee | 30th Anniversary 4xe, 4xe | 4 Cyl 2.0 L PLUG-IN HYBRID EV-GAS (PHEV)
View related parts
Jeep Grand Cherokee Rocker Arms Part Number: J3242393
Product Specifications
- Other Name: Arm - Valve; Arm, Valve Rocker; Arm, Valve Rocket; Rocker Arm Valve; Arm, Rocker
- Replaces: 53020344
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1993-2004 Jeep Grand Cherokee | Base, Laredo, Limited, Orvis, SE, Special Edition, Sport, TSi | 6 Cyl 4.0 L GAS
View related parts
Jeep Grand Cherokee Rocker Pivot Part Number: J3235090
Product Specifications
- Other Name: Rocker Arm; Rocker Arm Pivot; Pivot, Rocker Arm; Pivot Rocker Arm; Pivot
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1993-2004 Jeep Grand Cherokee | Base, Laredo, Limited, Orvis, SE, Special Edition, Sport, TSi | 6 Cyl 4.0 L GAS

Jeep Grand Cherokee Rocker Arm

Choose OEM Rocker Arm that meet Jeep factory standards. Jeep designs and tests every component for precision and durability. Each Rocker Arm follows strict manufacturing steps to lock in quality and fit. If your Jeep Grand Cherokee matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Grand Cherokee parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

The Rocker Arm in Jeep Grand Cherokee vehicles plays a very important part of the engines valvetrain mechanism and helps in the translation of the displacement from the pushrod to the intake and the exhaust valves. Usually made from stamped steel or aluminum the Rocker Arm translates the linear movement of the pushrod vertically into the required angular movement in order to open the valves. For such engines that require high rpm, aluminum is wisely used due to its light weight and durability of cast iron and forged carbon steel is employed in the case of diesel engines. Still, in Jeep Grand Cherokee models, different types of Rocker Arms are known, including roller rockers. Fondly referred to as roller rockers, these systems incorporate needle bearings which clearly offer less friction and wear than most previous generations of shafts. The rocker ratio which vary from 1.5:1 to 1.8:1 in current engine designs increases cam shaft lift to enhance performance. Higher rotation per minute engines also have fulcrum bearings to control stress with better solutions on the Rocker Arm system for Jeep Grand Cherokee vehicles.

Jeep Grand Cherokee Rocker Arm Parts and Q&A

Rocker Arms
J3242393
Q: How to Properly Clean and Inspect Rocker Arm Components on Jeep Grand Cherokee?
A:
Administratively cleaning the items and blowing air through the oil pathways in the rocker arms and push rods will help. Look at the pivot area on every rocker arm and change any that have scratches, holes, cracks or appear to be worn down. Examine the contact area at the end of the valve stem tip on every rocker arm and swap out any parts that are seriously pitted. Inspect each push rod end for signs of extra wear; remove and replace those that are worn and look at the related hydraulic tappet for extra signs of wear as well. Look at the push rods on a smooth surface and be sure they are straight or use a light to check for a groove on the rod between the rod and the flat material; an uneven wear pattern indicates an issue, so test the engine cylinder head for any clogging.
Rocker Arms
53020742AC
Q: How to Maintain and Fix a Rocker Arm on Jeep Grand Cherokee?
A:
The rocker arm assembly can be serviced and repaired by removing the engine cylinder head cover first. Review the rocker arm bridges to make sure they aren't interfering with the correct valve position. After that, unscrew the capscrews on the bridges and pivots, alternating between each side so you don't harm the bridges. Lift out the bridges, pivots and matching rocker arms and line them up on a bench in the same order you found them. Withdraw the push rods and place them side by side on the bench in the arrangement they were in the set. Apply some Mopar Engine Oil Supplement to each ball end of the push rods, insert the push rods into where they were originally and make sure the bottoms are lined up with the tappet plunger cap seat. Use Mopar Engine Oil Supplement or an equal on the rocker arm surface where it contacts the pivot, install them above each cylinder and then put the bridge above them. Screw the capscrews loosely into the bridges to start with and then tighten each one at a bridge by a single turn to avoid harm and torque them to 28 Nm (21 ft. lbs.). In the last step, put the engine cylinder head cover back on.