How to Safely Install Trunk Lid Lift Support on Jeep Grand Cherokee?

The liftgate glass support cylinders should be installed with the retaining clips fully inside the ball socket. After that, set the support cylinder on top of the ball studs, with the thin part facing towards the body, so the retaining clips snap into their place. Put the liftgate support cylinders on the car so that the large black top of each cylinder faces the top of the liftgate and the arrow points downwards. After that, install the studs and secure them by tightening to 28 Nm (21 ft. lbs.). It is important to keep the liftgate glass support rods and liftgate support rods together whenever you open the liftgate, as the high-pressure gas might lead to personal injury and never try to repair or handle the rods after removing them from the vehicle.

OEM Jeep Grand Cherokee Trunk Lid Lift Support

Lift Strut Rod

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

10 Trunk Lid Lift Supports found

View related parts
Jeep Grand Cherokee Lift Cylinder, Passenger Side Part Number: 68083884AA
$51.00 MSRP: $87.50
You Save: $36.50 (42%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Support - Liftgate Glass; Right Back Glass Lift Support; Tailgate Lift Support; Door Lift Support; Support Cylinder; Propeller Liftgate Glass; Back Glass Lift Support; Lift Support
- Position: Passenger Side
- Replaces: 55369618AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2011-2013 Jeep Grand Cherokee | Laredo, Limited, Overland, Overland Summit, SRT8 | 6 Cyl 3.6 L FLEX, 8 Cyl 5.7 L GAS, 8 Cyl 6.4 L GAS
View related parts
Jeep Grand Cherokee Lift Cylinder, Driver Side Part Number: 68083885AA
$59.48 MSRP: $87.50
You Save: $28.02 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Support - Liftgate Glass; Back Glass Lift Support, Left; Liftgate Lift Support; Tailgate Lift Support; Door Lift Support; Support Cylinder; Propeller Liftgate Glass; Back Glass Lift Support; Lift Support
- Position: Driver Side
- Replaces: 55369619AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2011-2013 Jeep Grand Cherokee | Laredo, Limited, Overland, Overland Summit, SRT8 | 6 Cyl 3.6 L FLEX, 8 Cyl 5.7 L GAS, 8 Cyl 6.4 L GAS
View related parts
Jeep Grand Cherokee Lift Cylinder, Driver Side Part Number: 68025358AB
$62.82 MSRP: $92.50
You Save: $29.68 (33%)
ADD TO CART
Product Specifications
- Other Name: Support - Liftgate Opening; Hatch Lift Support, Left; Back Glass Lift Support; Door Lift Support; Support Strut
- Position: Driver Side
- Replaces: 68025359AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2008-2010 Jeep Grand Cherokee | Laredo, Limited, Overland, SRT8 | 3.0L V6, 3.7L V6, 4.7L V8, 5.7L V8, 6 Cyl 3.0 L DIESEL, 6 Cyl 3.7 L GAS, 6.1L V8, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS
View related parts
Jeep Grand Cherokee Support Strut Part Number: 68342104AA
$99.40 MSRP: $152.00
You Save: $52.60 (35%)
ADD TO CART
Product Specifications
- Other Name: Propeller - Liftgate Gas Cylinder; Hatch Lift Support
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2022-2025 Jeep Grand Cherokee | 30th Anniversary 4xe, 4xe, Altitude, Altitude X, Anniversary Edition 4xe, Laredo, Laredo X, Limited, Overland, Summit, Summit Reserve, Trailhawk | 4 Cyl 2.0 L PLUG-IN HYBRID EV-GAS (PHEV), 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 8 Cyl 5.7 L GAS
View related parts
Jeep Grand Cherokee Housing - Liftgate Part Number: 68371475AC
$56.88 MSRP: $84.55
You Save: $27.67 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: HOUSING-LIFTGATE
- Replaces: 68371475AA, 68371475AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2022-2025 Jeep Grand Cherokee | 30th Anniversary 4xe, 4xe, Altitude, Altitude X, Anniversary Edition 4xe, Laredo, Laredo X, Limited, Overland, Summit, Summit Reserve, Trailhawk | 2.0L L4, 3.6L V6, 4 Cyl 2.0 L PLUG-IN HYBRID EV-GAS (PHEV), 5.7L V8, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 8 Cyl 5.7 L GAS
View related parts
Jeep Grand Cherokee Power Cylinder, Rear Part Number: 68333901AE
$274.19 MSRP: $405.00
You Save: $130.81 (33%)
ADD TO CART
Product Specifications
- Other Name: Unit - Liftgate; Tailgate Pull Down Motor, Rear; Motor
- Position: Rear
- Replaces: 68231347AC, 68333901AC, 68333901AA, 68333901AB, 68231347AB, 68231347AA, 68333901AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2015-2022 Jeep Grand Cherokee | 4xe, 75th Anniversary, 80th Anniversary, Altitude, High Altitude, Laredo, Laredo E, Laredo X, Limited, Limited X, Overland, SRT, Summit, Summit Reserve, Trackhawk, Trailhawk, Upland | 3.0L V6, 3.6L V6, 4 Cyl 2.0 L PLUG-IN HYBRID EV-GAS (PHEV), 5.7L V8, 6 Cyl 3.0 L DIESEL, 6 Cyl 3.6 L FLEX, 6.2L V8, 6.4L V8, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 6.4 L GAS
View related parts
Jeep Grand Cherokee Lift Cylinder, Rear Passenger Side Part Number: 68371478AA
$32.91 MSRP: $48.95
You Save: $16.04 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Propeller/Gas - Liftgate Gas Cylinder; Hatch Lift Support, Rear Right; Support Strut
- Position: Rear Passenger Side
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2022-2025 Jeep Grand Cherokee | 30th Anniversary 4xe, 4xe, Altitude, Altitude X, Anniversary Edition 4xe, Laredo, Laredo X, Limited, Overland, Summit, Summit Reserve, Trailhawk | 4 Cyl 2.0 L PLUG-IN HYBRID EV-GAS (PHEV), 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 8 Cyl 5.7 L GAS
View related parts
Jeep Grand Cherokee Lift Cylinder, Rear Driver Side Part Number: 68371479AA
$37.97 MSRP: $56.55
You Save: $18.58 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Propeller/Gas - Liftgate Gas Cylinder; Hatch Lift Support, Rear Left; Support Strut
- Position: Rear Driver Side
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2022-2025 Jeep Grand Cherokee | 30th Anniversary 4xe, 4xe, Altitude, Altitude X, Anniversary Edition 4xe, Laredo, Laredo X, Limited, Overland, Summit, Summit Reserve, Trailhawk | 4 Cyl 2.0 L PLUG-IN HYBRID EV-GAS (PHEV), 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 8 Cyl 5.7 L GAS
View related parts
Jeep Grand Cherokee Lift Cylinder Part Number: 2AML4857AA
$17.93 MSRP: $26.35
You Save: $8.42 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Propeller/Gas - Liftgate Support Left; Back Glass Lift Support; Tailgate Lift Support; Door Lift Support; Support Cylinder
- Replaces: G0004857AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1993-1995 Jeep Grand Cherokee | Base, Laredo, Limited, Orvis, SE | 6 Cyl 4.0 L GAS, 8 Cyl 5.2 L GAS
View related parts
Jeep Grand Cherokee Lift Cylinder Part Number: 2AML4856AA
$14.57 MSRP: $26.35
You Save: $11.78 (45%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Propeller/Gas - Liftgate Support Right; Back Glass Lift Support; Tailgate Lift Support; Door Lift Support; Support Cylinder
- Replaces: G0004856AC, G0004856AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1993-1998 Jeep Grand Cherokee | Base, Laredo, Limited, Orvis, SE | 4.0L L6, 5.2L V8, 5.9L V8, 6 Cyl 4.0 L GAS, 8 Cyl 5.2 L GAS

Jeep Grand Cherokee Trunk Lid Lift Support

Choose OEM Trunk Lid Lift Support that meet Jeep factory standards. Jeep designs and tests every component for precision and durability. Each Trunk Lid Lift Support follows strict manufacturing steps to lock in quality and fit. If your Jeep Grand Cherokee matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Grand Cherokee parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

The Jeep Grand Cherokee Trunk Lid Lift Support functions as an important system which boosts security and operation of the Jeep Grand Cherokee cargo compartment. This gas-charged cylinder maintains perfect pressure control for the trunk or tailgate so users can achieve automatic and secure opening of the wide cargo area. The Jeep Grand Cherokee Trunk Lid Lift Support contributes reliability and top performance to numerous Grand Cherokee versions for many years. Weak or faulty lift supports create unsafe situations when they cause the trunk lid to close suddenly by themselves indicating the need for regular maintenance and replacement. Besides making trunk access easier the Jeep Grand Cherokee Trunk Lid Lift Support actively contributes to safeguarding both passengers and stored items inside the trunk. This lift support stands out because it is built to last through strong materials while working on various car models. Despite its popularity for reliability and performance the Jeep model Trunk Lid Lift Support distinguishes itself within the automotive industry through its exceptional quality and innovation from the automaker.

Jeep Grand Cherokee Trunk Lid Lift Support Parts and Q&A

Lift Cylinder, Driver Side
68025358AB
Q: How to Safely Install Trunk Lid Lift Support on Jeep Grand Cherokee?
A:
The liftgate glass support cylinders should be installed with the retaining clips fully inside the ball socket. After that, set the support cylinder on top of the ball studs, with the thin part facing towards the body, so the retaining clips snap into their place. Put the liftgate support cylinders on the car so that the large black top of each cylinder faces the top of the liftgate and the arrow points downwards. After that, install the studs and secure them by tightening to 28 Nm (21 ft. lbs.). It is important to keep the liftgate glass support rods and liftgate support rods together whenever you open the liftgate, as the high-pressure gas might lead to personal injury and never try to repair or handle the rods after removing them from the vehicle.