How Is an Exhaust Pipe Installed on Jeep Liberty?

To mount the exhaust pipe, just put the exhaust pipe in the vehicle and snake the exhaust pipe hanger into the transmission support. Then go ahead and install the exhaust pipe to the catalytic converter flange using retaining nuts, but again, do not tighten at this point. At this point, mount the exhaust pipe to the muffler before you tighten. Ensure that the exhaust pipe and exhaust system are properly perpended with a minimum clearance of 25mm (1 inch) and correct, if necessary. Tighten the catalytic converter flange retaining nuts to 27 Nm (19 ft. lbs.) and the muffler mounting bolts to 31 Nm (23 ft. lbs.) once align. Therefore, install the oxygen sensors at the exhaust pipe and catalytic converter and connect the oxygen sensor connectors. Put the vehicle on stands, start the engine and check for any leaks and fix them. The final bit is to inspect the exhaust system and ensure that it does not contact body panels and make any required corrections.

How to Safely Remove an Exhaust Pipe on Jeep Liberty?

Always make sure to let the exhaust system cool before removing the exhaust pipe, since the catalytic converter can grow very hot. Be careful with torches and avoid bringing flames near any areas connected to fuel to avoid getting hurt. Start by putting the vehicle up, next spray all studs and nuts with Mopar(R) rust penetrant and wait for 5 minutes. The oxygen sensors can be taken out by first unplugging the sensors from the connectors. After that, undo the retaining nuts on the exhaust pie/catalytic converter and those on the exhaust pipe/muffler flange. In the end, move the exhaust pipe as far backward as possible so the hanger releases from the transmission support, then take it out of the car.

OEM Jeep Liberty Exhaust Pipe

Exhaust Tail Pipe

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

13 Exhaust Pipes found

View related parts
Jeep Liberty Muffler & Pipe Part Number: 52101120AD
$571.29 MSRP: $867.00
You Save: $295.71 (35%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Muffler - Exhaust; Exhaust Muffler; Direct-Fit Exhaust; Exhaust System Kit; Exhaust Pipe; Resonator; Muffler; Muffler And Tailpipe Exhaust
- Replaces: 56022957AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2002-2007 Jeep Liberty | 65th Anniversary Edition, Limited, Renegade, Rocky Mountain Edition, Sport | 4 Cyl 2.4 L GAS, 4 Cyl 2.8 L DIESEL, 6 Cyl 3.7 L GAS
View related parts
Jeep Liberty Muffler & Pipe Part Number: 52125078AH
$1259.50 MSRP: $1835.00
You Save: $575.50 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Muffler - Exhaust; Exhaust Muffler; Direct-Fit Exhaust; Exhaust System Kit; Exhaust Pipe; Resonator; Muffler
- Replaces: 52125078AE, 52125078AF, 52125078AG
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2008-2012 Jeep Liberty | Jet, Limited, Renegade, Sport | 3.7L V6, 6 Cyl 3.7 L GAS
View related parts
Jeep Liberty Converter & Pipe Part Number: 68105776AA
$2820.90 MSRP: $4135.00
You Save: $1314.10 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Converter - Exhaust; Catalytic Converter; Exhaust Pipe; Pipe And Converter Exhaust
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2012 Jeep Liberty | Jet, Limited, Sport | 6 Cyl 3.7 L GAS
View related parts
Jeep Liberty Catalytic Converter Part Number: 52125351AD
$3776.98 MSRP: $5520.00
You Save: $1743.02 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Converter - Exhaust; Exhaust Pipe; Converter & Pipe; Pipe And Converter Exhaust; Converter Catalytic
- Replaces: 52125351AE
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2009-2012 Jeep Liberty | Jet, Limited, Renegade, Sport | 6 Cyl 3.7 L GAS
View related parts
Jeep Liberty Catalytic Converter Part Number: 52129439AE
$4447.38 MSRP: $6490.00
You Save: $2042.62 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Converter - Exhaust; Exhaust Y Pipe; Exhaust Pipe; Converter & Pipe
- Replaces: 52129078AD, 52129078AF, 52129078AJ, 52129078AK, 52129439AB, 52129439AD, 52129078AG, 52129439AA, 52129439AC, 52129078AE, 52129078AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2005-2007 Jeep Liberty | 65th Anniversary Edition, Limited, Renegade, Rocky Mountain Edition, Sport | 3.7L V6, 6 Cyl 3.7 L GAS
View related parts
Jeep Liberty Catalytic Converter Part Number: 68052257AB
$4607.10 MSRP: $6700.00
You Save: $2092.90 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Converter - Exhaust; Exhaust Pipe; Converter & Pipe; Pipe And Converter Exhaust
- Replaces: 68052257AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2012 Jeep Liberty | Jet, Limited, Sport | 6 Cyl 3.7 L GAS
- 2010 Jeep Liberty
View related parts
Jeep Liberty Catalytic Converter Part Number: 52128599AJ
Product Specifications
- Other Name: Converter - Exhaust; Exhaust Pipe; Converter & Pipe
- Replaces: 52128599AG, 52128599AD, 52128599AC, 52128599AF, 52128599AE, 52128599AI
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2004 Jeep Liberty | Limited, Renegade, Sport | 3.7L V6, 6 Cyl 3.7 L GAS
View related parts
Jeep Liberty Catalytic Converter Part Number: 52128909AC
Product Specifications
- Other Name: Converter - Exhaust; Exhaust Pipe; Converter & Pipe; Pipe And Converter Exhaust To Manifold
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2005 Jeep Liberty | Sport | 4 Cyl 2.4 L GAS
View related parts
Jeep Liberty Catalytic Converter Part Number: 52101249AD
Product Specifications
- Other Name: Converter - Exhaust; Exhaust Pipe; Converter & Pipe; Pipe And Converter Exhaust
- Replaces: 52101249AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2002-2003 Jeep Liberty | Sport | 4 Cyl 2.4 L GAS
View related parts
Jeep Liberty Catalytic Converter Part Number: 52128684AC
Product Specifications
- Other Name: Converter - Exhaust; Exhaust Pipe; Converter & Pipe; Pipe And Converter Exhaust To Manifold
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2004 Jeep Liberty | Sport | 4 Cyl 2.4 L GAS
View related parts
Jeep Liberty Catalytic Converter Part Number: 52129140AD
Product Specifications
- Other Name: Converter - Exhaust; Exhaust Pipe; Converter & Pipe; Pipe And Converter Exhaust
- Replaces: 52129140AE, 52129140AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2005-2006 Jeep Liberty | Limited, Sport | 2.8L L4, 4 Cyl 2.8 L DIESEL
View related parts
Jeep Liberty Catalytic Converter Part Number: 52125351AC
Product Specifications
- Other Name: Converter - Exhaust; Exhaust Pipe; Converter & Pipe; Pipe And Converter Exhaust
- Replaces: 52125351AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2008 Jeep Liberty | Limited, Sport | 6 Cyl 3.7 L GAS
View related parts
Jeep Liberty Catalytic Converter Part Number: 52128736AD
Product Specifications
- Other Name: Converter - Exhaust; Exhaust Pipe; Converter & Pipe
- Replaces: 52128553AC, 52128736AC, 52128553AB, 52128736AA, 52128736AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2002-2003 Jeep Liberty | Limited, Renegade, Sport | 3.7L V6, 6 Cyl 3.7 L GAS

Jeep Liberty Exhaust Pipe

Choose OEM Exhaust Pipe that meet Jeep factory standards. Jeep designs and tests every component for precision and durability. Each Exhaust Pipe follows strict manufacturing steps to lock in quality and fit. If your Jeep Liberty matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Liberty parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

This article will focus on the Exhaust Pipe showing how it is key for the performance and reliability of the Jeep Liberty which is a compact SUV manufactured by Jeep an agricultural that has been in production from 2002 to 2012. This exhaust pipe has a great responsibility of mitigating poisonous gasses such as carbon monoxide away from the engine bay and the interior part of the automobile to achieve both efficiency and safety. Designed to fit the Liberty models of KJ and KK generations, the Exhaust Pipe smoothly interconnects with other equipment found in the exhaust system such as the muffler and the catalytic converter to provide the necessary means through which exhaust produced by the engine can be released. While analysing Jeep Liberty exhaust pipes, it is possible to conclude that they are long-lasting car parts; nevertheless, they might be subject to corrosion and could get damaged by minor accident. The exhaust pipe needs to be held in place in the correct position because any twist or bend is not advisable since it will vibrate and shake, and at the worst, leak dangerous fumes inside the car. The Jeep Liberty has independent front suspension, electronic stability control and other optional safety items that in addition to improving the overall driving experience, highlight the role of the exhaust pipe. For instance, there is the Exhaust Pipe that is special in the automobile market for its durability and flexibility to Jeep Liberty Trims like the Limited, Jeep Liberty Renegade, and Jeep Liberty Sport. Hence, through the promotion of efficiency and compliance with environment needs, the Exhaust Pipe still serves as evidence to this Jeep strive of providing quality and safety of their automobiles.

Jeep Liberty Exhaust Pipe Parts and Q&A

Catalytic Converter
52125351AD
Q: How Is an Exhaust Pipe Installed on Jeep Liberty?
A:
To mount the exhaust pipe, just put the exhaust pipe in the vehicle and snake the exhaust pipe hanger into the transmission support. Then go ahead and install the exhaust pipe to the catalytic converter flange using retaining nuts, but again, do not tighten at this point. At this point, mount the exhaust pipe to the Muffler before you tighten. Ensure that the exhaust pipe and exhaust system are properly perpended with a minimum clearance of 25mm (1 inch) and correct, if necessary. Tighten the catalytic converter flange retaining nuts to 27 Nm (19 ft. lbs.) and the muffler mounting bolts to 31 Nm (23 ft. lbs.) once align. Therefore, install the Oxygen Sensors at the exhaust pipe and catalytic converter and connect the oxygen sensor connectors. Put the vehicle on stands, start the engine and check for any leaks and fix them. The final bit is to inspect the exhaust system and ensure that it does not contact body panels and make any required corrections.
Muffler & Pipe
52125078AH
Q: How to Safely Remove an Exhaust Pipe on Jeep Liberty?
A:
Always make sure to let the exhaust system cool before removing the exhaust pipe, since the Catalytic Converter can grow very hot. Be careful with torches and avoid bringing flames near any areas connected to fuel to avoid getting hurt. Start by putting the vehicle up, next spray all studs and nuts with Mopar(R) rust penetrant and wait for 5 minutes. The Oxygen Sensors can be taken out by first unplugging the sensors from the connectors. After that, undo the retaining nuts on the exhaust pie/catalytic converter and those on the exhaust pipe/Muffler flange. In the end, move the exhaust pipe as far backward as possible so the hanger releases from the transmission support, then take it out of the car.