How to Service and Repair the Front Cross-Member on Jeep Liberty?

First, attach engine support tool 8534 or an alternative to the engine and after that, raise and support the vehicle properly. Now, let's remove the lower control arms, stabilizer bar, front axle if included and power steering rack. Remove the hold of the engine mount and then use a supportive lifting tool to hold up the engine cradle. Take a grease pencil and mark the engine support cradle spot, then lose the restoration of the bolts and take the engine cradle out. With the vehicle hoisted again, attach a suitable device to lift and position the engine cradle in place as you put the bolts through the engine mount holes. Adjust the engine cradle as marked earlier and attach the bolts for the mounting and inner rails. First, secure the front bolts with 122 N.m (90 ft.lbs.) torque, then tighten the rear bolts to 115 N.m (85 ft.lbs.) and finally tighten through bolts in the engine mount to 88 N.m (65 ft.lbs.). Put back the power steering rack, front axle if included, the stabilizer bar and the lower control arms. Lower the vehicle and take out your engine support tool after finishing the work.

How to Install a Front Cross-Member on Jeep Liberty?

First, prop up and support the vehicle before starting to install the cross-member. Secure the engine mount to the engine as you use a lifting device to lift the cradle into place. Attach the marks made earlier on the engine cradle with the inner and lower rails. Tighten the mounting bolts in front to 122 Nm (90 ft. lbs.) and in back to 115 Nm (85 ft. lbs.). Screw the engine mount together with screws that require 88 Nm (65 ft. lbs.) of pressure. Then, install the power steering rack and, if the vehicle has front axle, set that up as well, then the stabilizer bar and lower control arms. When done, lower your truck and take out the engine support tools.

OEM Jeep Liberty Front Cross-Member

Front Engine Cross Member

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

11 Front Cross-Members found

View related parts
Jeep Liberty Seat Crossmember, Front Part Number: 56052087AB
$115.57 MSRP: $171.00
You Save: $55.43 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Crossmember - Front Seat Retention; Crossmember Front Seat Retention
- Position: Front
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2008-2012 Jeep Liberty | Jet, Limited, Renegade, Sport | 6 Cyl 3.7 L GAS
View related parts
Jeep Liberty Impact Bar, Front Part Number: 55360190AN
$169.95 MSRP: $252.00
You Save: $82.05 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Crossmember - Front Support; Frame Crossmember, Front; Front Crossmember; Crossmember Front Support
- Position: Front
- Replaces: 55113328AB, 55360190AG, 55360190AH, 55360190AM, 55360190AE, 55113328AA, 55360190AD, 55360190AJ, 55360190AK, 55360190AF, 55360190AL
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2002-2012 Jeep Liberty | 65th Anniversary Edition, Jet, Limited, Renegade, Rocky Mountain Edition, Sport | 2.4L L4, 2.8L L4, 3.7L V6, 4 Cyl 2.4 L GAS, 4 Cyl 2.8 L DIESEL, 6 Cyl 3.7 L GAS
View related parts
Jeep Liberty Engine Cradle, Front Part Number: 52059463AF
$286.76 MSRP: $422.00
You Save: $135.24 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Crossmember - Front Suspension; Engine Cradle, Front
- Position: Front
- Replaces: 52059463AE, 52059463AC, 52059463AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2002-2003 Jeep Liberty | Sport | 4 Cyl 2.4 L GAS
View related parts
Jeep Liberty Engine Cradle, Front Part Number: 52109889AK
$799.21 MSRP: $1165.00
You Save: $365.79 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Crossmember - Front Suspension; Engine Cradle, Front; Cradle Front Suspension
- Position: Front
- Replaces: 52109889AJ, 52109889AF, 52109889AG, 52109889AH, 52109889AD, 52109889AE
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2008-2012 Jeep Liberty | Jet, Limited, Renegade, Sport | 3.7L V6, 6 Cyl 3.7 L GAS
View related parts
Jeep Liberty Engine Cradle, Front Part Number: 52129323AB
Product Specifications
- Other Name: Crossmember - Front Suspension
- Position: Front
- Replaces: 52129323AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007 Jeep Liberty | Limited, Sport | 3.7L V6, 6 Cyl 3.7 L GAS
View related parts
Jeep Liberty Engine Cradle, Front Part Number: 52129013AE
Product Specifications
- Other Name: Crossmember - Front Suspension; Engine Cradle, Front; Cradle Front Suspension
- Position: Front
- Replaces: 52129013AD, 52129013AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2005-2006 Jeep Liberty | Limited, Sport | 2.8L L4, 4 Cyl 2.8 L DIESEL
View related parts
Jeep Liberty Engine Cradle, Front Part Number: 52128994AF
Product Specifications
- Other Name: Crossmember - Front Suspension; Engine Cradle, Front
- Position: Front
- Replaces: 52128994AC, 52128994AD, 52128994AE
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2005-2006 Jeep Liberty | 65th Anniversary Edition, Limited, Renegade, Rocky Mountain Edition, Sport | 3.7L V6, 6 Cyl 3.7 L GAS
View related parts
Jeep Liberty Engine Cradle, Front Part Number: 52059462AG
Product Specifications
- Other Name: Cradle - Front Suspension; Engine Cradle, Front; Cradle Front Suspension
- Position: Front
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2004 Jeep Liberty | Limited, Renegade, Sport | 6 Cyl 3.7 L GAS
View related parts
Jeep Liberty Engine Cradle, Front Part Number: 52059462AE
Product Specifications
- Other Name: Crossmember - Front Suspension; Engine Cradle, Front; Crossmember Front Suspension
- Position: Front
- Replaces: 52059462AD, 52059462AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2002-2003 Jeep Liberty | Limited, Renegade, Sport | 6 Cyl 3.7 L GAS
View related parts
Jeep Liberty Engine Cradle, Front Part Number: 52059463AG
Product Specifications
- Other Name: Cradle - Front Suspension; Engine Cradle, Front; Crossmember Front Suspension; Cradle Front Suspension
- Position: Front
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2003-2004 Jeep Liberty | Sport | 4 Cyl 2.4 L GAS
View related parts
Jeep Liberty Engine Cradle, Front Part Number: 5179812AA
Product Specifications
- Other Name: Crossmember - Front Suspension; Engine Cradle, Front
- Position: Front
- Replaces: 52128995AD, 52128995AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2005 Jeep Liberty | Sport | 2.4L L4, 4 Cyl 2.4 L GAS

Jeep Liberty Front Cross-Member

Choose OEM Front Cross-Member that meet Jeep factory standards. Jeep designs and tests every component for precision and durability. Each Front Cross-Member follows strict manufacturing steps to lock in quality and fit. If your Jeep Liberty matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Liberty parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

Jeep Liberty Front Cross-Member Parts and Q&A

Engine Cradle, Front
52059463AF
Q: How to Service and Repair the Front Cross-Member on Jeep Liberty?
A:
First, attach engine support tool 8534 or an alternative to the engine and after that, raise and support the vehicle properly. Now, let's remove the lower Control Arms, stabilizer bar, front axle if included and power steering rack. Remove the hold of the engine mount and then use a supportive lifting tool to hold up the engine cradle. Take a grease pencil and mark the engine support cradle spot, then lose the restoration of the bolts and take the engine cradle out. With the vehicle hoisted again, attach a suitable device to lift and position the engine cradle in place as you put the bolts through the engine mount holes. Adjust the engine cradle as marked earlier and attach the bolts for the mounting and inner rails. First, secure the front bolts with 122 N.m (90 ft.lbs.) torque, then tighten the rear bolts to 115 N.m (85 ft.lbs.) and finally tighten through bolts in the engine mount to 88 N.m (65 ft.lbs.). Put back the power steering rack, front axle if included, the stabilizer bar and the lower control arms. Lower the vehicle and take out your engine support tool after finishing the work.
Impact Bar, Front
55360190AN
Q: How to Install a Front Cross-Member on Jeep Liberty?
A:
First, prop up and support the vehicle before starting to install the cross-member. Secure the engine mount to the engine as you use a lifting device to lift the cradle into place. Attach the marks made earlier on the engine cradle with the inner and lower rails. Tighten the mounting bolts in front to 122 Nm (90 ft. lbs.) and in back to 115 Nm (85 ft. lbs.). Screw the engine mount together with screws that require 88 Nm (65 ft. lbs.) of pressure. Then, install the power steering rack and, if the vehicle has front axle, set that up as well, then the stabilizer bar and lower Control Arms. When done, lower your truck and take out the engine support tools.