OEM Jeep Patriot Engine Oil Cooler

Oil Cooler
  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Engine Oil Cooler found

  • Jeep Patriot Engine Oil Cooler Diagram - 4884757AE
    View related parts

    Jeep Patriot Oil Cooler Part Number: 4884757AE

    $103.32 MSRP: $155.00
    You Save: $51.68 (34%)
    Ships in 1-2 Business Days
    ADD TO CART
    Product Specifications
    • Other Name: Cooler - Engine Oil; Engine Oil Cooler; Cooler Engine Oil
    • Replaces: 4884757AD
    • Warranty: This genuine part is guaranteed by Mopar's factory warranty.
    Fits the following Vehicles:
    • 2007-2017 Jeep Patriot | 75th Anniversary, Latitude, Latitude X, Limited, Sport | 2.0L L4, 2.4L L4, 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS

Jeep Patriot Engine Oil Cooler

Choose OEM Engine Oil Cooler that meet Jeep factory standards. Jeep designs and tests every component for precision and durability. Each Engine Oil Cooler follows strict manufacturing steps to lock in quality and fit. If your Jeep Patriot matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Patriot parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

The Jeep Patriot Engine Oil Cooler keeps the insulating oil temperature at optimal levels during strenuous driving conditions. The Jeep Engine Oil Cooler directs hot oil through a small oil-to-coolant heat-exchanger. The heat-exchanger is connected to a circuit in the vehicle's radiator. So, coolant flow absorbs excess heat, reaching a safe oil operating temperature quickly and limiting peak temperatures. By managing viscosity through the intended range, the Engine Oil Cooler protects the bearings, pistons and other moving parts in the Jeep Patriot under heavy load situations such as steep towing and high ambient heat. The constant flow through the Engine Oil Cooler thus pulls heat away from every surface that oil contacts and prevents thermal breakdown that would otherwise damage the oil and reduce its life. When the coolant passages inside the unit become clogged because of lack of cooling-system maintenance, the efficiency of heat transfer drops, and internal corrosion can create leaks that let oil get into the coolant. When working correctly, the Engine Oil Cooler is a simple factory-installed mechanism designed for the cooling requirements of the Jeep Patriot, allowing the car's powertrain to perform, last, and endure like a Jeep Patriot.

Jeep Patriot Engine Oil Cooler Parts and Q&A

  • Q: How to Install an Engine Oil Cooler on Jeep Patriot?
    A:
    Before installing the engine oil cooler, make sure to change the oil cooler seal. Add lubricant to the seal and slide the oil cooler onto the Oil Filter adapter, so that the notch matches the tab. Now, put in the oil cooler connector bolt and tighten it until it reaches 49 Nm (36 ft. lbs.). Then, set the oil filter in place and link the oil cooler coolant hose. After that, bring the vehicle back down to earth and add coolant to the system.
  • Q: How to Service an Engine Oil Cooler on Jeep Patriot?
    A:
    An engine oil cooler should be serviced by putting the vehicle on a hoist and emptying out the cooling system. Subsequently, take off the oil cooler hoses from the coolant hotels, pull off the Oil Filter with number 3 and remove the oil cooler bolt which has number 2. Removing the oil cooler with part number 1, you should note that oil coolers cannot be cleaned and must be replaced if the engine needs rebuilding or a replacement.

Related Jeep Patriot Parts