How to Install a Power Steering Pump for a Gas Engine on Jeep Patriot?

Installing the power steering pump on a gas engine needs you to first wipe the open power steering pressure hose end and the pump port clean using a lint-free towel, replace any old O-rings with new ones and apply some clean fluid to the O-rings. Set the pump into position and insert the bolts through the pulley holes, holding each with 26 Nm (19 ft.-lbs.) of torque. Now, put the drive belt in place, after that install the pump's supply hose and fasten it using a hose clamp. Join the pressure hose to the pressure outlet on the pump and secure the tube nut so that 32 Nm (24 ft. lbs.) of torque is applied, then mount the pressure hose routing bracket bolt at the top of the engine. Next, condition the power steering system by adding and releasing fluid, double-check for leaks and then add the engine appearance cover.

OEM Jeep Patriot Power Steering Pump

Power Steering Pump Unit

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Power Steering Pumps found

View related parts
Jeep Patriot Power Steering Pump Part Number: 5105048AC
$123.21 MSRP: $268.00
You Save: $144.79 (55%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pump - Power Steering; Pump Power Steering See Note; Pump Power Steering
- Replaces: 5105048AA, 5105048AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2017 Jeep Patriot | 75th Anniversary, Latitude, Latitude X, Limited, Sport | 2.0L L4, 2.4L L4, 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
Jeep Patriot Power Steering Pump Part Number: RLX05048EC
Product Specifications
- Other Name: Pump - Power Steering; Pump Power Steering
- Replaces: RL105048EC, RX105048EC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2016-2017 Jeep Patriot | 75th Anniversary, Latitude, Sport | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS

Jeep Patriot Power Steering Pump

Choose OEM Power Steering Pump that meet Jeep factory standards. Jeep designs and tests every component for precision and durability. Each Power Steering Pump follows strict manufacturing steps to lock in quality and fit. If your Jeep Patriot matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Patriot parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

Jeep Patriot Power Steering Pump plays a very important role in the transmission of engine power into hydraulic power; this makes steering easier for the driver. This pump works by creating fluid pressure that is of immense/helper in turning of the steering wheel especially when in low speed or even zero speed. The pump can be mounted on the engine's crankshaft through a V-belt or serpentine belt, and the system comprises of a fluid reservoir which can be either built-in or external. Hydraulic power steering systems have been mostly incorporated in Jeep Patriot models and these systems have a direct mechanical linkage between the steering wheel and the wheels. This design thus provides for the fact that even when there is power failure, one can still turn the car manually. The hydraulic system remains the same in the basic setup, but to meet different driving styles and standard and performance models, the tuning has been changed slightly adjusting the balance of assist. In conclusion, the Jeep Patriot Power Steering Pump is very important in improving the driving comfort and control.

Jeep Patriot Power Steering Pump Parts and Q&A

Power Steering Pump
5105048AC
Q: How to Install a Power Steering Pump for a Gas Engine on Jeep Patriot?
A:
Installing the power steering pump on a gas engine needs you to first wipe the open power steering pressure hose end and the pump port clean using a lint-free towel, replace any old O-rings with new ones and apply some clean fluid to the O-rings. Set the pump into position and insert the bolts through the pulley holes, holding each with 26 Nm (19 ft.-lbs.) of torque. Now, put the Drive Belt in place, after that install the pump's supply hose and fasten it using a hose clamp. Join the pressure hose to the pressure outlet on the pump and secure the tube nut so that 32 Nm (24 ft. lbs.) of torque is applied, then mount the pressure hose routing bracket bolt at the top of the engine. Next, condition the power steering system by adding and releasing fluid, double-check for leaks and then add the engine appearance cover.