What are the recommended steps for conditioning the parking brake system, including the backing plate, after replacing the lining on Jeep Wrangler?

It is advised that, after the replacement of the parking brake lining, the parking brake is conditioned by making a stop from 25 mph on dry pavement or concrete using light to moderate force of the parking brake lever. To begin, install the support plate on the axle seal plate, and tighten the bolts. Reattach the rear park brake shoes and fix the support plate to the axle shaft before attaching the axle shaft to the axle. The brake cable must be reconnected to the park brake shoe lever, which sits behind the support plate, and then the rear park brake cable must be installed at the equalizer. Remove the parking brake cable lockout at the front and install the rear wheel speed sensor. After adjusting the rear brake shoes, install the rotor and the caliper adapter of the disc brake. Proceed to attach the tire and wheel assembly, inspect and replenish the rear axle fluid, and descend the vehicle. Lastly, ensure adequate functionality of park brake system.

How to service and repair the parking brake Backing Plate on Jeep Wrangler?

To access the parking brake backing plate for service and repair, lift and support suspension components first, then remove the tire and wheel assembly. Next, remove the adapter on the disc brake caliper and the disc brake rotor. Detach the wheel speed sensor and lock out the front brake cable on the equalizer. Remove the rear parking brake cable from its equalizer, as well as the parking brake cable from the axle brake shoe lever. Remove the axle shaft, then tap the axle shaft off the support plate. Take the rear park brake shoes apart and ultimately remove the support plate from the axle seal plate.

OEM Jeep Wrangler Backing Plate

Brake Dust Shield

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

22 Backing Plates found

View related parts
Jeep Wrangler Backing Plate, Front Driver Side Part Number: 52005477
$38.93 MSRP: $83.70
You Save: $44.77 (54%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Shield - Brake; Brake Dust Shield, Front Left; Splash Shield; Shield, Splash, Right; Shield Brake
- Position: Front Driver Side
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1997-2006, 1987-1995 Jeep Wrangler | 65th Anniversary Edition, Base, Islander, Laredo, Renegade, Rio Grande, Rubicon, S, SE, Sahara, Sport, Unlimited, Unlimited Rubicon, X | 4 Cyl 2.4 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 4.0 L GAS, 6 Cyl 4.2 L GAS
View related parts
Jeep Wrangler Backing Plate, Front Passenger Side Part Number: 68273110AA
$7.37 MSRP: $10.70
You Save: $3.33 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Shield - Splash; Brake Dust Shield, Front Right; Splash Shield; Shield Splash; Brake Dust Shield
- Position: Front Passenger Side
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2018-2025 Jeep Wrangler | 80th Anniversary, Freedom, Islander, Rubicon, Rubicon X, Sport, Sport S, Unlimited 80th Anniversary, Unlimited Freedom, Unlimited High Altitude, Unlimited High Altitude 4xe, Unlimited High Tide, Unlimited Islander, Unlimited Moab, Unlimited Rubicon, Unlimited Rubicon 392, Unlimited Rubicon 4xe, Unlimited Rubicon X, Unlimited Rubicon X 4xe, Unlimited Sahara, Unlimited Sahara 4xe, Unlimited Sahara Altitude, Unlimited Sport, Unlimited Sport Altitude, Unlimited Sport S, Unlimited Sport S 4xe, Unlimited Willys, Unlimited Willys 4xe, Unlimited Willys Sport, Willys, Willys Sport | 4 Cyl 2.0 L GAS, 4 Cyl 2.0 L MILD HYBRID EV-GAS (MHEV), 4 Cyl 2.0 L PLUG-IN HYBRID EV-GAS (PHEV), 6 Cyl 3.0 L DIESEL, 6 Cyl 3.6 L GAS, 6 Cyl 3.6 L MILD HYBRID EV-GAS (MHEV), 8 Cyl 6.4 L GAS
View related parts
Jeep Wrangler Backing Plate, Front Driver Side Part Number: 68043287AB
$22.81 MSRP: $33.75
You Save: $10.94 (33%)
ADD TO CART
Product Specifications
- Other Name: Shield - Splash; Brake Dust Shield, Front Left; Splash Shield; Shield Splash; Brake Dust Shield
- Position: Front Driver Side
- Replaces: 52060143AA, 68043287AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2017 Jeep Wrangler | 70th Anniversary, 75th Anniversary, Rubicon, Sahara, Sport, Sport S, Unlimited 70th Anniversary, Unlimited 75th Anniversary, Unlimited Rubicon, Unlimited Sahara, Unlimited Sport, Unlimited Sport S, Unlimited X, X | 3.8L V6, 6 Cyl 3.6 L GAS, 6 Cyl 3.8 L GAS
View related parts
Jeep Wrangler Backing Plate, Front Passenger Side Part Number: 68043286AB
$22.81 MSRP: $33.75
You Save: $10.94 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Shield - Splash; Brake Dust Shield, Front Right; Splash Shield; Shield Splash; Brake Dust Shield
- Position: Front Passenger Side
- Replaces: 68043286AA, 52060142AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2017 Jeep Wrangler | 70th Anniversary, 75th Anniversary, Rubicon, Sahara, Sport, Sport S, Unlimited 70th Anniversary, Unlimited 75th Anniversary, Unlimited Rubicon, Unlimited Sahara, Unlimited Sport, Unlimited Sport S, Unlimited X, X | 3.8L V6, 6 Cyl 3.6 L GAS, 6 Cyl 3.8 L GAS
View related parts
Jeep Wrangler Backing Plate Part Number: 68299457AA
$121.54 MSRP: $184.00
You Save: $62.46 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Plate - Parking Brake; Brake Dust Shield; Adapter Assembly Parking Brake
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2018-2025 Jeep Wrangler | 80th Anniversary, Freedom, Islander, Rubicon, Rubicon X, Sport, Sport S, Unlimited 80th Anniversary, Unlimited Freedom, Unlimited High Altitude, Unlimited High Tide, Unlimited Islander, Unlimited Moab, Unlimited Rubicon, Unlimited Rubicon X, Unlimited Sahara, Unlimited Sahara Altitude, Unlimited Sport, Unlimited Sport Altitude, Unlimited Sport S, Unlimited Willys, Unlimited Willys Sport, Willys, Willys Sport | 4 Cyl 2.0 L GAS, 4 Cyl 2.0 L MILD HYBRID EV-GAS (MHEV), 6 Cyl 3.0 L DIESEL, 6 Cyl 3.6 L GAS, 6 Cyl 3.6 L MILD HYBRID EV-GAS (MHEV)
View related parts
Jeep Wrangler Backing Plate, Rear Part Number: 68340238AA
$152.76 MSRP: $229.00
You Save: $76.24 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Plate - Parking Brake; Parking Brake Assembly, Rear; Brake Dust Shield; Brake Assembly; Adapter Assembly Parking Brake
- Position: Rear
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2021-2025 Jeep Wrangler | Unlimited High Altitude 4xe, Unlimited Rubicon 4xe, Unlimited Rubicon X 4xe, Unlimited Sahara 4xe, Unlimited Sport S 4xe, Unlimited Willys 4xe | 4 Cyl 2.0 L PLUG-IN HYBRID EV-GAS (PHEV)
View related parts
Jeep Wrangler Backing Plate Part Number: 52125175AD
$162.79 MSRP: $244.00
You Save: $81.21 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Plate - Parking Brake
- Replaces: 52125175AB, 52125175AC, 52125175AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2018 Jeep Wrangler | 70th Anniversary, 75th Anniversary, Rubicon, Sahara, Sport, Sport S, Unlimited 70th Anniversary, Unlimited 75th Anniversary, Unlimited Rubicon, Unlimited Sahara, Unlimited Sport, Unlimited Sport S, Unlimited X, X | 3.6L V6, 3.8L V6, 6 Cyl 3.6 L GAS, 6 Cyl 3.8 L GAS
View related parts
Jeep Wrangler Backing Plate, Front Driver Side Part Number: 68444105AB
$11.89 MSRP: $17.25
You Save: $5.36 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Shield - Splash; Brake Dust Shield, Front Left; Splash Shield; Shield Splash; Brake Dust Shield
- Position: Front Driver Side
- Replaces: 68444105AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2021-2024 Jeep Wrangler | Unlimited Rubicon 392 | 8 Cyl 6.4 L GAS
View related parts
Jeep Wrangler Backing Plate, Front Passenger Side Part Number: 68444104AB
$11.89 MSRP: $17.25
You Save: $5.36 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Shield - Splash; Brake Dust Shield, Front Right; Splash Shield; Shield Splash; Brake Dust Shield
- Position: Front Passenger Side
- Replaces: 68444104AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2021-2024 Jeep Wrangler | Unlimited Rubicon 392 | 8 Cyl 6.4 L GAS
View related parts
Jeep Wrangler Backing Plate, Rear Part Number: 68517041AA
$27.81 MSRP: $41.15
You Save: $13.34 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Adjuster - Parking Brake; Parking Brake Adjuster, Rear; Adjuster; Adjuster Parking Brake
- Position: Rear
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2021-2023 Jeep Wrangler | Unlimited Rubicon 392 | 8 Cyl 6.4 L GAS
View related parts
Jeep Wrangler Backing Plate, Rear Passenger Side Part Number: 5017760AB
$405.73
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Plate - Brake Backing; Brake Backing Plate, Rear Right; Brake Dust Shield
- Position: Rear Passenger Side
- Replaces: 5017760AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1997-2006 Jeep Wrangler | 2.4L L4, 2.5L L4, 4.0L L6
- 1990-1995 Jeep Wrangler
View related parts
Jeep Wrangler Backing Plate Part Number: 68142504AA
$163.47 MSRP: $173.00
You Save: $9.53 (6%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Module - Level Unit; Fuel Sender and Hanger Assembly; Fuel Level Sensor; Fuel Gauge Sending Unit; Sending Unit
- Replaces: 4897757AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1997-2004 Jeep Wrangler | Rubicon, Sahara, SE, Sport, Unlimited, X | 2.4L L4, 2.5L L4, 4 Cyl 2.4 L GAS, 4 Cyl 2.5 L GAS, 4.0L L6, 6 Cyl 4.0 L GAS
View related parts
Jeep Wrangler Backing Plate Part Number: 68249593AA
$137.15 MSRP: $205.00
You Save: $67.85 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Plate - Parking Brake; Brake Dust Shield; Adapter Assembly Parking Brake
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2018-2025 Jeep Wrangler | 80th Anniversary, Freedom, Islander, Rubicon, Rubicon X, Sport, Sport S, Unlimited 80th Anniversary, Unlimited Freedom, Unlimited High Altitude, Unlimited High Altitude 4xe, Unlimited High Tide, Unlimited Islander, Unlimited Moab, Unlimited Rubicon, Unlimited Rubicon 392, Unlimited Rubicon 4xe, Unlimited Rubicon X, Unlimited Rubicon X 4xe, Unlimited Sahara, Unlimited Sahara 4xe, Unlimited Sahara Altitude, Unlimited Sport, Unlimited Sport Altitude, Unlimited Sport S, Unlimited Sport S 4xe, Unlimited Willys, Unlimited Willys 4xe, Unlimited Willys Sport, Willys, Willys Sport | 4 Cyl 2.0 L GAS, 4 Cyl 2.0 L MILD HYBRID EV-GAS (MHEV), 4 Cyl 2.0 L PLUG-IN HYBRID EV-GAS (PHEV), 6 Cyl 3.0 L DIESEL, 6 Cyl 3.6 L GAS, 6 Cyl 3.6 L MILD HYBRID EV-GAS (MHEV), 8 Cyl 6.4 L GAS
View related parts
Jeep Wrangler Backing Plate, Front Driver Side Part Number: 68273111AA
$7.37 MSRP: $10.70
You Save: $3.33 (32%)
Product Specifications
- Other Name: Shield - Splash; Brake Dust Shield, Front Left; Splash Shield; Shield Splash; Brake Dust Shield
- Position: Front Driver Side
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2018-2025 Jeep Wrangler | 80th Anniversary, Freedom, Islander, Rubicon, Rubicon X, Sport, Sport S, Unlimited 80th Anniversary, Unlimited Freedom, Unlimited High Altitude, Unlimited High Altitude 4xe, Unlimited High Tide, Unlimited Islander, Unlimited Moab, Unlimited Rubicon, Unlimited Rubicon 392, Unlimited Rubicon 4xe, Unlimited Rubicon X, Unlimited Rubicon X 4xe, Unlimited Sahara, Unlimited Sahara 4xe, Unlimited Sahara Altitude, Unlimited Sport, Unlimited Sport Altitude, Unlimited Sport S, Unlimited Sport S 4xe, Unlimited Willys, Unlimited Willys 4xe, Unlimited Willys Sport, Willys, Willys Sport | 4 Cyl 2.0 L GAS, 4 Cyl 2.0 L MILD HYBRID EV-GAS (MHEV), 4 Cyl 2.0 L PLUG-IN HYBRID EV-GAS (PHEV), 6 Cyl 3.0 L DIESEL, 6 Cyl 3.6 L GAS, 6 Cyl 3.6 L MILD HYBRID EV-GAS (MHEV), 8 Cyl 6.4 L GAS
View related parts
Jeep Wrangler Backing Plate, Front Passenger Side Part Number: 52005476
Product Specifications
- Other Name: Shield - Brake; Brake Dust Shield, Front Right; Splash Shield; Shield, Splash, Right; Shield Brake
- Position: Front Passenger Side
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1997-2006, 1987-1995 Jeep Wrangler | 65th Anniversary Edition, Base, Islander, Laredo, Renegade, Rio Grande, Rubicon, S, SE, Sahara, Sport, Unlimited, Unlimited Rubicon, X | 4 Cyl 2.4 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 4.0 L GAS, 6 Cyl 4.2 L GAS
View related parts
Jeep Wrangler Backing Plate Part Number: 4471933
Product Specifications
- Other Name: Plate - Flexplate Or Flywheel Backing; Drive Plate Adapter; Rear Retainer; Flexplate or Flywheel Backing; Crankshaft Bolt Backing.
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2011 Jeep Wrangler | 70th Anniversary, Rubicon, Sahara, Sport, Unlimited 70th Anniversary, Unlimited Rubicon, Unlimited Sahara, Unlimited Sport, Unlimited X, X, X-S | 6 Cyl 3.8 L GAS
View related parts
Jeep Wrangler Backing Plate, Rear Driver Side Part Number: 5017761AB
Product Specifications
- Other Name: Plate - Brake Backing; Brake Backing Plate, Rear Left; Brake Dust Shield
- Position: Rear Driver Side
- Replaces: 5017761AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1997-2006 Jeep Wrangler | 2.4L L4, 2.5L L4, 4.0L L6
- 1990-1995 Jeep Wrangler
View related parts
Jeep Wrangler Parking Brake, Rear Driver Side Part Number: 52128415AC
Product Specifications
- Other Name: Plate - Disc Brake Caliper; Parking Brake Assembly, Rear Left; Brake Caliper Bracket; Brake Dust Shield; Backing Plate; Adapter
- Position: Rear Driver Side
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2003-2006 Jeep Wrangler | 65th Anniversary Edition, Rubicon, SE, Sahara, Sport, Unlimited, Unlimited Rubicon, X | 4 Cyl 2.4 L GAS, 6 Cyl 4.0 L GAS
View related parts
Jeep Wrangler Backing Plate, Rear Passenger Side Part Number: 4856718AB
Product Specifications
- Other Name: Plate - Brake Backing; Brake Backing Plate, Rear Right; Brake Dust Shield; Plate Brake Backing
- Position: Rear Passenger Side
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1999-2006 Jeep Wrangler | 65th Anniversary Edition, Rubicon, SE, Sahara, Sport, Unlimited, Unlimited Rubicon, X | 4 Cyl 2.4 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 4.0 L GAS
View related parts
Jeep Wrangler Backing Plate, Rear Driver Side Part Number: 4856719AB
Product Specifications
- Other Name: Plate - Brake Backing; Brake Backing Plate, Rear Left; Brake Dust Shield; Plate Brake Backing
- Position: Rear Driver Side
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1999-2006 Jeep Wrangler | 65th Anniversary Edition, Rubicon, SE, Sahara, Sport, Unlimited, Unlimited Rubicon, X | 4 Cyl 2.4 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 4.0 L GAS

| Page 1 of 2 |Next >

1-20 of 22 Results

Jeep Wrangler Backing Plate

Choose OEM Backing Plate that meet Jeep factory standards. Jeep designs and tests every component for precision and durability. Each Backing Plate follows strict manufacturing steps to lock in quality and fit. If your Jeep Wrangler matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Wrangler parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

Jeep Wrangler Backing Plate Parts and Q&A

Backing Plate, Front Driver Side
68043287AB
Q:
What are the recommended steps for conditioning the parking brake system, including the backing plate, after replacing the lining on Jeep Wrangler?
A:
It is advised that, after the replacement of the parking brake lining, the parking brake is conditioned by making a stop from 25 mph on dry pavement or concrete using light to moderate force of the parking brake lever. To begin, install the support plate on the axle seal plate, and tighten the bolts. Reattach the rear park brake shoes and fix the support plate to the axle shaft before attaching the axle shaft to the axle. The brake cable must be reconnected to the park brake shoe lever, which sits behind the support plate, and then the rear park brake cable must be installed at the equalizer. Remove the parking brake cable lockout at the front and install the rear wheel speed sensor. After adjusting the rear brake shoes, install the rotor and the caliper adapter of the disc brake. Proceed to attach the tire and wheel assembly, inspect and replenish the rear axle fluid, and descend the vehicle. Lastly, ensure adequate functionality of park brake system.
Backing Plate, Front Passenger Side
68043286AB
Q:
How to service and repair the parking brake Backing Plate on Jeep Wrangler?
A:
To access the parking brake backing plate for service and repair, lift and support suspension components first, then remove the tire and wheel assembly. Next, remove the adapter on the disc brake caliper and the disc brake rotor. Detach the wheel speed sensor and lock out the front brake cable on the equalizer. Remove the rear parking brake cable from its equalizer, as well as the parking brake cable from the axle brake shoe lever. Remove the axle shaft, then tap the axle shaft off the support plate. Take the rear park brake shoes apart and ultimately remove the support plate from the axle seal plate.