How to Install a Fender on the Front on Jeep Wrangler?

Begin by fitting the antenna, when required and then secure the fender (5) to the mounting structure (2) close to the vehicle's end frame. After that, loosely place the cowl bolts (1), upper bolts (3), door opening bolts (7), wheelhouse bolt (4) and sill bolts (6). Change the height of the fender to get the right gap and alignment. After the right gap and flush measurements are taken, tighten bolts 1, 3, 4 and 7 in the fender to 5 Nm (45 in. lbs.) and the two sill bolts (6) to 12 Nm (9 ft. lbs.). After that, set the windshield frame bracket, front wheelhouse splash shield, wheel opening flares and the cowl top panel.

How to Detach a Fender on Jeep Wrangler?

Before removing the front fender, you should first undo the cowl top panel and after that the wheel flares. After that, separate the splash shield and the frame bracket for the windshield. After securing the A-pillar side bolts, undo the cowl bolts (1), upper bolts (3), rear bolts (7) in the door and the sill bolts (6). Remove the bolt that holds the wheelhouse (4) and the fender (5) after that. Also take the antenna off the fender if your vehicle is so equipped.

OEM Jeep Wrangler Fender

Wheel Fender

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Fenders found

View related parts
Jeep Wrangler Fender, Front Driver Side Part Number: 68029993AC
$659.52 MSRP: $961.00
You Save: $301.48 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Panel - Fender; Fender, Front Left
- Position: Front Driver Side
- Replaces: 68029993AB, 68002399AC, 68002399AD, 68002399AE, 68002399AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2018 Jeep Wrangler | 70th Anniversary, 75th Anniversary, Rubicon, Sahara, Sport, Sport S, Unlimited 70th Anniversary, Unlimited 75th Anniversary, Unlimited Rubicon, Unlimited Sahara, Unlimited Sport, Unlimited Sport S, Unlimited X, X | 3.6L V6, 3.8L V6, 6 Cyl 3.6 L GAS, 6 Cyl 3.8 L GAS
View related parts
Jeep Wrangler Fender, Front Passenger Side Part Number: 68029992AC
$664.10 MSRP: $967.00
You Save: $302.90 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Panel - Fender; Fender, Front Right
- Position: Front Passenger Side
- Replaces: 68002398AD, 68002398AC, 68002398AE, 68002398AB, 68029992AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2018 Jeep Wrangler | 70th Anniversary, 75th Anniversary, Rubicon, Sahara, Sport, Sport S, Unlimited 70th Anniversary, Unlimited 75th Anniversary, Unlimited Rubicon, Unlimited Sahara, Unlimited Sport, Unlimited Sport S, Unlimited X, X | 3.6L V6, 3.8L V6, 6 Cyl 3.6 L GAS, 6 Cyl 3.8 L GAS
View related parts
Jeep Wrangler Fender, Front Driver Side Part Number: 68281947AC
$353.81 MSRP: $517.00
You Save: $163.19 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Panel - Fender; Fender, Front Left; Panel Fender
- Position: Front Driver Side
- Replaces: 68281947AA, 68281947AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2018-2025 Jeep Wrangler | 80th Anniversary, Freedom, Islander, Rubicon, Rubicon X, Sport, Sport S, Unlimited 80th Anniversary, Unlimited Freedom, Unlimited High Altitude, Unlimited High Altitude 4xe, Unlimited High Tide, Unlimited Islander, Unlimited Moab, Unlimited Rubicon, Unlimited Rubicon 392, Unlimited Rubicon 4xe, Unlimited Rubicon X, Unlimited Rubicon X 4xe, Unlimited Sahara, Unlimited Sahara 4xe, Unlimited Sahara Altitude, Unlimited Sport, Unlimited Sport Altitude, Unlimited Sport S, Unlimited Sport S 4xe, Unlimited Willys, Unlimited Willys 4xe, Unlimited Willys Sport, Willys, Willys Sport | 2.0L L4, 3.0L V6, 3.6L V6, 4 Cyl 2.0 L GAS, 4 Cyl 2.0 L MILD HYBRID EV-GAS (MHEV), 4 Cyl 2.0 L PLUG-IN HYBRID EV-GAS (PHEV), 6 Cyl 3.0 L DIESEL, 6 Cyl 3.6 L GAS, 6 Cyl 3.6 L MILD HYBRID EV-GAS (MHEV), 8 Cyl 6.4 L GAS
View related parts
Jeep Wrangler Fender, Front Passenger Side Part Number: 68281946AC
$353.81 MSRP: $517.00
You Save: $163.19 (32%)
ADD TO CART
Product Specifications
- Other Name: Panel - Fender; Fender, Front Right; Panel Fender
- Position: Front Passenger Side
- Replaces: 68281946AB, 68281946AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2018-2025 Jeep Wrangler | 80th Anniversary, Freedom, Islander, Rubicon, Rubicon X, Sport, Sport S, Unlimited 80th Anniversary, Unlimited Freedom, Unlimited High Altitude, Unlimited High Altitude 4xe, Unlimited High Tide, Unlimited Islander, Unlimited Moab, Unlimited Rubicon, Unlimited Rubicon 392, Unlimited Rubicon 4xe, Unlimited Rubicon X, Unlimited Rubicon X 4xe, Unlimited Sahara, Unlimited Sahara 4xe, Unlimited Sahara Altitude, Unlimited Sport, Unlimited Sport Altitude, Unlimited Sport S, Unlimited Sport S 4xe, Unlimited Willys, Unlimited Willys 4xe, Unlimited Willys Sport, Willys, Willys Sport | 2.0L L4, 3.0L V6, 3.6L V6, 4 Cyl 2.0 L GAS, 4 Cyl 2.0 L MILD HYBRID EV-GAS (MHEV), 4 Cyl 2.0 L PLUG-IN HYBRID EV-GAS (PHEV), 6 Cyl 3.0 L DIESEL, 6 Cyl 3.6 L GAS, 6 Cyl 3.6 L MILD HYBRID EV-GAS (MHEV), 8 Cyl 6.4 L GAS
View related parts
Jeep Wrangler Fender, Front Driver Side Part Number: 5003951AL
$1179.35 MSRP: $1720.00
You Save: $540.65 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Fender, Front Left
- Position: Front Driver Side
- Replaces: 5003951AK, 5003951AD, 5003951AE, 5003951AJ, 5003951AC, 5003951AF, 5003951AG
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1997-2006 Jeep Wrangler | 65th Anniversary Edition, Rubicon, SE, Sahara, Sport, Unlimited, Unlimited Rubicon, X | 2.4L L4, 2.5L L4, 4 Cyl 2.4 L GAS, 4 Cyl 2.5 L GAS, 4.0L L6, 6 Cyl 4.0 L GAS
View related parts
Jeep Wrangler Fender, Front Passenger Side Part Number: 5003950AL
$1179.35 MSRP: $1720.00
You Save: $540.65 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Fender, Front Right
- Position: Front Passenger Side
- Replaces: 5003950AF, 5003950AJ, 5003950AE, 5003950AH, 5003950AD, 5003950AK, 5003950AG
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1997-2006 Jeep Wrangler | 65th Anniversary Edition, Rubicon, SE, Sahara, Sport, Unlimited, Unlimited Rubicon, X | 2.4L L4, 2.5L L4, 4 Cyl 2.4 L GAS, 4 Cyl 2.5 L GAS, 4.0L L6, 6 Cyl 4.0 L GAS

Jeep Wrangler Fender

Choose OEM Fender that meet Jeep factory standards. Jeep designs and tests every component for precision and durability. Each Fender follows strict manufacturing steps to lock in quality and fit. If your Jeep Wrangler matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Wrangler parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

Jeep Wrangler Fender Parts and Q&A

Fender, Front Passenger Side
68029992AC
Q: How to Install a Fender on the Front on Jeep Wrangler?
A:
Begin by fitting the Antenna, when required and then secure the fender (5) to the mounting structure (2) close to the vehicle's end frame. After that, loosely place the cowl bolts (1), upper bolts (3), door opening bolts (7), wheelhouse bolt (4) and sill bolts (6). Change the height of the fender to get the right gap and alignment. After the right gap and flush measurements are taken, tighten bolts 1, 3, 4 and 7 in the fender to 5 Nm (45 in. lbs.) and the two sill bolts (6) to 12 Nm (9 ft. lbs.). After that, set the windshield frame bracket, front wheelhouse splash shield, wheel opening flares and the cowl top panel.
Fender, Front Driver Side
68029993AC
Q: How to Detach a Fender on Jeep Wrangler?
A:
Before removing the front fender, you should first undo the cowl top panel and after that the wheel flares. After that, separate the splash shield and the frame bracket for the windshield. After securing the A-pillar side bolts, undo the cowl bolts (1), upper bolts (3), rear bolts (7) in the door and the sill bolts (6). Remove the bolt that holds the wheelhouse (4) and the fender (5) after that. Also take the Antenna off the fender if your vehicle is so equipped.