How to Remove the Ignition Coil Positioned Above the Left Valve Cover on Jeep Wrangler?

Before you start removing the ignition coil pack above the left valve cover, first take off the negative battery cable. After that, take off the six spark plug cables. After that, pull out the electrical connector from the ignition coil. Afterwards, remove the nuts from the two coil mounting positions. At the end, take out the coil pack from the mounting studs.

How to Replace and Install an Ignition Coil on Jeep Wrangler?

Epoxy-filled ignition coils must be replaced by the same type if you need to remove one. It is attached by bracket on the side of the engine, positioned behind the distributor. Before you take out the ignition coil, unplug the ignition coil from both the secondary cable and the engine harness. Afterwards, undo the bolts fastening the ignition coil to the bracket, remembering some coils may have nuts on the back side of the bracket. After taking out the old coil, commercially, you should tighten both nuts and bolts to the appropriate specifications; 11 Nm (100 in. lbs.) for nuts and 5 Nm (50 in. lbs.) for bolts only, when fixing the new ignition coil onto the bracket on the block. After that, join up the engine harness connector and the ignition coil cable to the ignition coil.

OEM Jeep Wrangler Ignition Coil

Ignition Coil Resistor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

11 Ignition Coils found

View related parts
Jeep Wrangler Ignition Coil Part Number: 56028172AC
$74.65 MSRP: $115.00
You Save: $40.35 (36%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Coil/Ignition - Ignition; Coil
- Replaces: 56028172AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1998-2002 Jeep Wrangler | SE, Sahara, Sport | 2.5L L4, 4 Cyl 2.5 L GAS, 6 Cyl 4.0 L GAS
View related parts
Jeep Wrangler Ignition Coil Part Number: 4797293AB
$271.83 MSRP: $415.00
You Save: $143.17 (35%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Coil/Ignition - Ignition; Coil
- Replaces: 4797293
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1997 Jeep Wrangler | 2.5L L4, 4.0L L6
- 1991-1995 Jeep Wrangler
View related parts
Jeep Wrangler Ignition Coil Part Number: 56032520AF
$115.96 MSRP: $174.00
You Save: $58.04 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Coil/Ignition - Ignition
- Replaces: 56032520AC, 56032520AE
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2011 Jeep Wrangler | 70th Anniversary, Rubicon, Sahara, Sport, Unlimited 70th Anniversary, Unlimited Rubicon, Unlimited Sahara, Unlimited Sport, Unlimited X, X | 3.8L V6, 6 Cyl 3.8 L GAS
View related parts
Jeep Wrangler Ignition Coil Part Number: 4609103AC
$141.61 MSRP: $212.00
You Save: $70.39 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Coil/Ignition - Ignition; Coil On Plug Coil; Coil
- Replaces: 4609103AB, 5269670, 4609103
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2003-2006 Jeep Wrangler | SE | 2.4L L4, 4 Cyl 2.4 L GAS
View related parts
Jeep Wrangler Ignition Coil Part Number: 5149168AJ
$79.11 MSRP: $119.00
You Save: $39.89 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Coil - Ignition; Direct Ignition Coil; Coil On Plug Coil; Coil Assembly; Coil Ignition
- Replaces: 5149168AI, 5149168AH
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2012-2018 Jeep Wrangler | 75th Anniversary, Rubicon, Sahara, Sport, Sport S, Unlimited 75th Anniversary, Unlimited Rubicon, Unlimited Sahara, Unlimited Sport, Unlimited Sport S | 3.6L V6, 6 Cyl 3.6 L GAS
View related parts
Jeep Wrangler Ignition Coil Part Number: 68223569AD
$84.12 MSRP: $121.00
You Save: $36.88 (31%)
ADD TO CART
Product Specifications
- Other Name: Coil - Ignition; Direct Ignition Coil; Coil Assembly; Coil Ignition
- Replaces: 68223569AB, 68223569AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2018-2025 Jeep Wrangler | 80th Anniversary, Freedom, Islander, Rubicon, Rubicon X, Sport, Sport S, Unlimited 80th Anniversary, Unlimited Freedom, Unlimited High Altitude, Unlimited High Tide, Unlimited Islander, Unlimited Moab, Unlimited Rubicon, Unlimited Rubicon X, Unlimited Sahara, Unlimited Sahara Altitude, Unlimited Sport, Unlimited Sport Altitude, Unlimited Sport S, Unlimited Willys, Unlimited Willys Sport, Willys, Willys Sport | 6 Cyl 3.6 L GAS, 6 Cyl 3.6 L MILD HYBRID EV-GAS (MHEV)
View related parts
Jeep Wrangler Ignition Coil Part Number: 68238603AA
$104.52 MSRP: $144.00
You Save: $39.48 (28%)
ADD TO CART
Product Specifications
- Other Name: Coil/Ignition - Ignition; Direct Ignition Coil; Coil On Plug Coil; Coil Ignition
- Replaces: 56029129AA, 56029129AF, 56029129AB, 68060346AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2021-2024 Jeep Wrangler | Unlimited Rubicon 392 | 8 Cyl 6.4 L GAS
View related parts
Jeep Wrangler Ignition Coil Part Number: 68211953AA
$99.01 MSRP: $151.00
You Save: $51.99 (35%)
ADD TO CART
Product Specifications
- Other Name: Coil - Ignition; Direct Ignition Coil; Coil Ignition
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2018-2025 Jeep Wrangler | 80th Anniversary, Freedom, Islander, Rubicon, Rubicon X, Sport, Sport S, Unlimited 80th Anniversary, Unlimited Freedom, Unlimited High Altitude, Unlimited High Altitude 4xe, Unlimited Islander, Unlimited Rubicon, Unlimited Rubicon 392, Unlimited Rubicon 4xe, Unlimited Rubicon X, Unlimited Rubicon X 4xe, Unlimited Sahara, Unlimited Sahara 4xe, Unlimited Sahara Altitude, Unlimited Sport, Unlimited Sport Altitude, Unlimited Sport S, Unlimited Sport S 4xe, Unlimited Willys, Unlimited Willys 4xe, Unlimited Willys Sport, Willys, Willys Sport | 4 Cyl 2.0 L GAS, 4 Cyl 2.0 L MILD HYBRID EV-GAS (MHEV), 4 Cyl 2.0 L PLUG-IN HYBRID EV-GAS (PHEV), 8 Cyl 6.4 L GAS
View related parts
Jeep Wrangler Ignition Coil Part Number: T1031135
Product Specifications
- Other Name: Coil - Ignition Engine Ignition; Coil, Ignition Electronic Fuel Injection Engine; Coil, Ignition
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1987-1990 Jeep Wrangler | Base, Islander, Laredo, S, Sahara, Sport | 4 Cyl 2.5 L GAS
View related parts
Jeep Wrangler Ignition Coil Part Number: 56041476AB
Product Specifications
- Other Name: Coil/Ignition - Ignition; Direct Ignition Coil
- Replaces: 56041476AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2000-2006 Jeep Wrangler | 65th Anniversary Edition, Rubicon, SE, Sahara, Sport, Unlimited, Unlimited Rubicon, X | 4.0L V6, 6 Cyl 4.0 L GAS
View related parts
Jeep Wrangler Ignition Coil Part Number: 33004522
Product Specifications
- Other Name: Coil; Coil, Ignition, Electronic Fuel Injection; Carbureted Engine, KDX; Carbureted Engine.
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1987-1990 Jeep Wrangler | Base, Islander, Laredo, S, Sahara, Sport | 6 Cyl 4.2 L GAS

Jeep Wrangler Ignition Coil

Choose OEM Ignition Coil that meet Jeep factory standards. Jeep designs and tests every component for precision and durability. Each Ignition Coil follows strict manufacturing steps to lock in quality and fit. If your Jeep Wrangler matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Wrangler parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

The Ignition Coil is one of the famous and vital parts of a car, especially the Jeep Wrangler automobiles that are to make the engine run. The ignition coil on the other hand takes the low voltage electric power drawn from the battery and steps it up the high voltage that enables the creation of spark to ignite the fuel in the combustion chambers. In the existing types of vehicles, each cylinder usually has its individual ignition coil, and so get rid of high-tension lead and distributor. More advanced types of ignition coils that have been used in the past include the coil-on-plug and wasted spark systems. Ignition coils that are not working properly would mean a vehicle that would misfire, poorly consume fuel and would lack power, thus the significance of this part in the automobile.

Jeep Wrangler Ignition Coil Parts and Q&A

Ignition Coil
56032520AF
Q: How to Remove the Ignition Coil Positioned Above the Left Valve Cover on Jeep Wrangler?
A:
Before you start removing the ignition coil pack above the left valve cover, first take off the negative Battery Cable. After that, take off the six spark plug cables. After that, pull out the electrical connector from the ignition coil. Afterwards, remove the nuts from the two coil mounting positions. At the end, take out the coil pack from the mounting studs.
Ignition Coil
56028172AC
Q: How to Replace and Install an Ignition Coil on Jeep Wrangler?
A:
Epoxy-filled ignition coils must be replaced by the same type if you need to remove one. It is attached by bracket on the side of the engine, positioned behind the distributor. Before you take out the ignition coil, unplug the ignition coil from both the secondary cable and the engine harness. Afterwards, undo the bolts fastening the ignition coil to the bracket, remembering some coils may have nuts on the back side of the bracket. After taking out the old coil, commercially, you should tighten both nuts and bolts to the appropriate specifications; 11 Nm (100 in. lbs.) for nuts and 5 Nm (50 in. lbs.) for bolts only, when fixing the new ignition coil onto the bracket on the block. After that, join up the engine harness connector and the ignition coil cable to the ignition coil.