How to Locate and Remove the Intake Manifold Temperature Sensor on Jeep Wrangler?

Part number 2, the intake manifold temperature (IMT) sensor, is in the rubber air intake tube, number 1, close to the throttle body. You should begin by removing the electrical connector from the IMT sensor, then remove the sensor. After that, make sure there are no dirt particles near the base of the IMT sensor. Upon doing this, turn the IMT sensor and pull it up as you slowly try to get it loose. The last check is to look at the sensor O-ring.

How is the Intake Manifold Temperature Sensor Installed into the Rubber Air Intake Tube on Jeep Wrangler?

The IMT sensor is mounted into the intake air tube rubber (1) on its way to the throttle body. Clean inside the mounting hole and inspect the condition of the sensor O-ring first. After that, hold the IMT sensor and push it into the rubber intake tube as you rotate it to make sure it stays in the right place. At last, secure the electrical connector onto the IMT sensor.

OEM Jeep Wrangler Intake Manifold Temperature Sensor

Air Intake Temperature Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

8 Intake Manifold Temperature Sensors found

View related parts
Jeep Wrangler Temperature Sensor Part Number: 56028364AA
$38.57 MSRP: $55.45
You Save: $16.88 (31%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Air Temperature; Air Charge Temperature Sensor; Air Temperature Sensor; Ambient Temperature Sensor; Air Intake Temperature Sensor; Duct Air Temperature Sensor.
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2006, 2003-2004 Jeep Wrangler | 65th Anniversary Edition, Rubicon, SE, Sport, Unlimited, Unlimited Rubicon, X | 4 Cyl 2.4 L GAS, 6 Cyl 4.0 L GAS
View related parts
Jeep Wrangler Air Temperature Sensor Part Number: 5269756
$43.72 MSRP: $72.20
You Save: $28.48 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Air Charge Temperature; Air Charge Temperature Sensor; Intake Air Temperature Sensor; Air Intake Temperature Sensor; 4.0-5.2 Engine; ABS Front Wheel Right; Air Charge Temperature Sensor
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1997 Jeep Wrangler
- 1992-1995 Jeep Wrangler | 2.5L L4, 4.0L L6
View related parts
Jeep Wrangler Intake Air Temperature Sensor Part Number: 68211210AA
$324.04 MSRP: $482.00
You Save: $157.96 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Air Temperature; Air Charge Temperature Sensor; Air Temperature Sensor; Air Intake Temperature Sensor; Sensor Air Temperature
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2020-2023 Jeep Wrangler | Unlimited 80th Anniversary, Unlimited Freedom, Unlimited High Altitude, Unlimited Islander, Unlimited Rubicon, Unlimited Sahara, Unlimited Sahara Altitude, Unlimited Sport, Unlimited Sport Altitude, Unlimited Sport S, Unlimited Willys, Unlimited Willys Sport | 6 Cyl 3.0 L DIESEL
View related parts
Jeep Wrangler Temperature Sensor Part Number: 4606487AB
$67.13 MSRP: $99.05
You Save: $31.92 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Charge Air Temperature; Air Charge Temperature Sensor; Intake Air Temperature Sensor; Air Temperature Sensor; Air Intake Temperature Sensor; Charge Temperature Sensor; Sensor; Sensor Charge Air Temperature
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2005-2008 Jeep Wrangler | Rubicon, SE, Sahara, Unlimited Rubicon, Unlimited Sahara, Unlimited X, X | 4 Cyl 2.4 L GAS, 6 Cyl 3.8 L GAS
View related parts
Jeep Wrangler Charge Temperature Sensor Part Number: 5149176AB
$21.17 MSRP: $31.40
You Save: $10.23 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Charge Air Temperature; Air Charge Temperature Sensor; Intake Air Temperature Sensor; Sensor Charge Air Temperature
- Replaces: 5149176AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2008-2011 Jeep Wrangler | 70th Anniversary, Rubicon, Sahara, Sport, Unlimited 70th Anniversary, Unlimited Rubicon, Unlimited Sahara, Unlimited Sport, Unlimited X, X | 3.8L V6, 6 Cyl 3.8 L GAS
View related parts
Jeep Wrangler Mass Air Flow Sensor Part Number: 5149182AB
$31.67 MSRP: $46.95
You Save: $15.28 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Air Temperature; Air Charge Temperature Sensor; Intake Air Temperature Sensor; Air Temperature Sensor; Temperature Sensor; Air Intake Temperature Sensor; Sensor Air Temperature
- Replaces: 5149182AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2012-2025 Jeep Wrangler | 75th Anniversary, 80th Anniversary, Freedom, Islander, Rubicon, Rubicon X, Sahara, Sport, Sport S, Unlimited 75th Anniversary, Unlimited 80th Anniversary, Unlimited Freedom, Unlimited High Altitude, Unlimited High Tide, Unlimited Islander, Unlimited Moab, Unlimited Rubicon, Unlimited Rubicon X, Unlimited Sahara, Unlimited Sahara Altitude, Unlimited Sport, Unlimited Sport Altitude, Unlimited Sport S, Unlimited Willys, Unlimited Willys Sport, Willys, Willys Sport | 6 Cyl 3.6 L GAS, 6 Cyl 3.6 L MILD HYBRID EV-GAS (MHEV)
View related parts
Jeep Wrangler Temperature Sensor Part Number: 5149279AC
$29.76 MSRP: $44.40
You Save: $14.64 (33%)
ADD TO CART
Product Specifications
- Other Name: Sensor - Charge Air Temperature; Intake Air Temperature; Mass Air Flow Sensor; MAP Sensor; Pressure Sensor; Air Mass Sensor; Air Intake Temperature Sensor; Charge Air Temperature Sensor.
- Replaces: 5149279AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2018-2025 Jeep Wrangler | 80th Anniversary, Freedom, Islander, Rubicon, Rubicon X, Sport, Sport S, Unlimited 80th Anniversary, Unlimited Freedom, Unlimited High Altitude, Unlimited High Altitude 4xe, Unlimited Islander, Unlimited Rubicon, Unlimited Rubicon 392, Unlimited Rubicon 4xe, Unlimited Rubicon X, Unlimited Rubicon X 4xe, Unlimited Sahara, Unlimited Sahara 4xe, Unlimited Sahara Altitude, Unlimited Sport, Unlimited Sport Altitude, Unlimited Sport S, Unlimited Sport S 4xe, Unlimited Willys, Unlimited Willys 4xe, Unlimited Willys Sport, Willys, Willys Sport | 4 Cyl 2.0 L GAS, 4 Cyl 2.0 L MILD HYBRID EV-GAS (MHEV), 4 Cyl 2.0 L PLUG-IN HYBRID EV-GAS (PHEV), 8 Cyl 6.4 L GAS
View related parts
Jeep Wrangler Air Temperature Sensor Part Number: 56027872
$38.87 MSRP: $57.85
You Save: $18.98 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Air Temperature; Engine Intake Manifold Temperature Sensor; Intake Air Temperature Sensor; Air Intake Temperature Sensor; Temperature Sending Unit; Sensor Ambient Temperature; Sensor Air Temperature
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1997-2005 Jeep Wrangler | Rubicon, SE, Sahara, Sport, Unlimited, Unlimited Rubicon, X | 4 Cyl 2.5 L GAS, 6 Cyl 4.0 L GAS

Jeep Wrangler Intake Manifold Temperature Sensor

Choose OEM Intake Manifold Temperature Sensor that meet Jeep factory standards. Jeep designs and tests every component for precision and durability. Each Intake Manifold Temperature Sensor follows strict manufacturing steps to lock in quality and fit. If your Jeep Wrangler matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Wrangler parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

The IAT or the Intake Manifold Temperature Sensor in Jeep which is installed in most of the jeep wrangler is vital for good combustion and overcoming the problem of less efficient combustion due to cold or hot air intake temperature. This information is then communicated to the Powertrain Control Module (PCM) which will in turn adjust the timing of the fuel injector to the right position in order to allow the right air/fuel mixture ratio for a given operating condition of the vehicle. For many years, various Intake Manifold Temperature Sensors have been used in Jeep Wrangler models, amongst which MAF and VAF sensors. Each type is aimed at the measurement of certain television lengths of air flow and is optimized for use with given fuel injectors. These sensors can change concerning their capability to address elevated air flow, primarily if changes to performance, for example, the throttle body, or fuel injectors, are made. Intake Manifold Temperature Sensor requires correct functioning as any problems associated with it may cause stall or improper air/fuel ratio.

Jeep Wrangler Intake Manifold Temperature Sensor Parts and Q&A

Charge Temperature Sensor
5149176AB
Q: How to Locate and Remove the Intake Manifold Temperature Sensor on Jeep Wrangler?
A:
Part number 2, the intake manifold temperature (IMT) sensor, is in the rubber air intake tube, number 1, close to the Throttle Body. You should begin by removing the electrical connector from the IMT sensor, then remove the sensor. After that, make sure there are no dirt particles near the base of the IMT sensor. Upon doing this, turn the IMT sensor and pull it up as you slowly try to get it loose. The last check is to look at the sensor O-ring.
Temperature Sensor
4606487AB
Q: How is the Intake Manifold Temperature Sensor Installed into the Rubber Air Intake Tube on Jeep Wrangler?
A:
The IMT sensor is mounted into the intake air tube rubber (1) on its way to the Throttle Body. Clean inside the mounting hole and inspect the condition of the sensor O-ring first. After that, hold the IMT sensor and push it into the rubber intake tube as you rotate it to make sure it stays in the right place. At last, secure the electrical connector onto the IMT sensor.