OEM parts sourced directly from Ram deliver superior quality, long lasting strength, and a precise fit you can trust. Each item goes through strict quality checks to ensure safety, toughness, and performance that matches your factory equipment. At JeepPartsDeal online shop, you'll get top-quality, budget-friendly OEM Ram Cooling Fan Relay for your vehicle. We focus on giving you a high standard without pushing up the price. Our full selection of genuine factory products comes backed by the original manufacturer's warranty. You'll love our fast delivery, seamless shopping experience, and convenient return policy, saving you all the hassle.
A Ram Cooling Fan Relay is a small switch that receives a signal from the control computer, which controls a heavy current for the radiator fan while keeping the wires from melting. Ram trucks deliver triumph because comfort never compromises strength. Its frame is rigid, while its air suspension lifts by eight inches for the rocks but drops down low on the pavement to slice through drag and save fuel. The e-Torque mild hybrid adds an extra boost of launch torque and lowers your fuel bills noticeably at every fill-up. RamBox lockers fitted on the sides of the bed swallow up a lot of gear and lock tight, keeping tools dry and thieves all annoyed. Silent cabins envelop travelers in soft-touch textiles and giant touch screens for easy routing and playlist selection. Ram further remains light and nimble to cut fatigue on city commutes or towing days. The Cooling Fan Relay activates the fan when slow-speed traffic or steep grades may cause overheating of the coolant. Only basic skills are needed for swapping a Cooling Fan Relay. Start by disconnecting the negative battery cable to cut off power. Next, lift the lid of the fuse box and read the map so you know which cube to finger. Take the old relay, rock it up, note the blade pattern and throw it away. Inspect for signs of rust or melted plastic and clean or replace if damaged. Firmly push the new Cooling Fan Relay all the way down until it clicks, snap the cover back on, reattach the battery and start your Ram. The fan should spin within seconds and the temperature gauge should hold steady.