2004 Chrysler Concorde Camshaft, Timing Chain, Timing Cover, Cam Gear

Camshaft, Timing Chain, Timing Cover Installation and Repair Tips for 2004 Chrysler Concorde

• Q:

  How to Maintain a Timing Cover on 2004 Chrysler Concorde?

  A:

  To service the timing chain cover, disconnect the negative cable, remove various components and remove the timing chain cover. Clean surfaces, replace gaskets and apply RTV sealant Install the cover, tighten bolts and reattaching such components as the radiator fan and belts and then reattach the negative cable.
• Q:

  How to Remove and Install a Camshaft on 2004 Chrysler Concorde?

  A:

  To get rid of the camshaft, loosen up the primary timing chain and secondary chain tensioner bolts. Unscrew and take out the camshaft bearing caps and then take out the camshafts and tensioner as a unit. Check on the damage and wear and replace where required. In installations, make sure that there is a proper alignment and torque.
• Q:

  How to Inspect and Install Timing Chain Sprockets and Guides on 2004 Chrysler Concorde?

  A:

  Check and change damaged sprockets and chain guides. Install crankshaft sprocket and set timing marks. Apply lubricant to timing chain, install sprockers and check alignment. Install bolts to desired torque. Reset the timing chain tensioner, install parts and check activation. There could be some engine noise in the new engine shortly after startup.