2004 Dodge Intrepid Camshaft, Timing Chain, Timing Cover, Cam Gear

Camshaft, Timing Chain, Timing Cover Installation and Repair Tips for 2004 Dodge Intrepid

• Q:

  How to Remove and Install a Camshaft on 2004 Dodge Intrepid?

  A:

  To get rid of the camshaft, loosen up the primary timing chain and secondary chain tensioner bolts. Unscrew and take out the camshaft bearing caps and then take out the camshafts and tensioner as a unit. Check on the damage and wear and replace where required. In installations, make sure that there is a proper alignment and torque.
• Q:

  How to Remove a Timing Chain on 2004 Dodge Intrepid?

  A:

  To remove the timing chain, first remove the upper intake manifold, cylinder head covers, crankshaft damper and timing chain cover. Align timing marks with rotation of the crankshaft. Remove the primary timing chain tensioner, camshaft position sensor and sprockets, and remove the lower chain guide and the primary timing chain.
• Q:

  How to Maintain a Timing Cover on 2004 Dodge Intrepid?

  A:

  To service the timing chain cover, disconnect the negative cable, remove various components and remove the timing chain cover. Clean surfaces, replace gaskets and apply RTV sealant Install the cover, tighten bolts and reattaching such components as the radiator fan and belts and then reattach the negative cable.