2006 Chrysler Pacifica Camshaft, Timing Chain, Timing Cover, Cam Gear

Cam Gear, Camshaft, Timing Cover Installation and Repair Tips for 2006 Chrysler Pacifica

• Q:

  How to Service and Repair Cam Gear on a 3.5L Engine on 2006 Chrysler Pacifica?

  A:

  To service the camshaft sprockets on a 3.5L engine, make sure that you do not rotate the engine with the timing belt off. Release fuel pressure Remove timing belt cover Check TDC. Remove parts, install new sprockets, and install and align the timing belt according to proper alignment and torque specifications before reassembling the engine.
• Q:

  How to remove and Inspecting Camshafts During Cylinder Head Disassembly on 2006 Chrysler Pacifica?

  A:

  In order to remove camshafts, cylinder head must first be removed without breaking the journals. Check the wear or binding of the camshaft; replace where necessary. Test lobe wear, changing the camshaft in case it is more than 0.254 mm. Wipe all elements with clean engine oil prior to recombination.
• Q:

  How to Maintain the Rear Timing Cover on 2006 Chrysler Pacifica?

  A:

  To service the rear timing belt cover, discharge the fuel pressure and disconnect the battery. Remove the timing belt, camshaft sprockets and rear cover bolts. Replace O-rings and clean surfaces and lubricate with Mopar Dielectric Grease. Reinstall cover, tighten bolts to given torque then reinstall sprockets and timing belt.