2009 Dodge Journey Camshaft, Timing Chain, Timing Cover, Cam Gear

Cam Gear, Camshaft, Timing Cover Installation and Repair Tips for 2009 Dodge Journey

• Q:

  How to Service and Repair Cam Gear on 2009 Dodge Journey?

  A:

  To service the camshaft sprockets, release gas pressure and take off the cover for the front timing belt. Position the crankshaft at TDC and inspect the piston and remove the camshaft retainer, cylinder head covers, and rocker assemblies. Remove the timing belt, camshaft gear bolts and sprockets with care to maintain clearance when removing them.
• Q:

  How to Service and Repair a Rear Timing Cover on 2009 Dodge Journey?

  A:

  To service the rear timing cover, discharge the fuel pressure, disconnect battery negative cable, and loosen timing belt and cams sprockets. Next, take out the bolts that attach the back cover. It is important to note that O-Rings that covered the water pump passages must not be re-used.
• Q:

  How to Remove a Camshaft on 2009 Dodge Journey?

  A:

  To remove the camshaft, first attach the rocker arm shaft assembly and camshaft sprocket. For right camshaft, remove the EGR Valve assembly. Then, remove the camshaft thrust plate and extract the camshaft with great care, so as not to damage the journals. The PCM may have to be removed for easier access.