How to Remove and Reinstall an Axle Shaft on 2000 Chrysler Cirrus?

In order to take out the axle shaft, loosen the hub nut, lift the vehicle, and take out the tire. Loose the brake caliper, disc and tie rod end. Dislocate the steering knuckle and the bottom ball joint then dislocate the inner tripod joint. Wipe and reassemble parts and tighten all nuts to the required torque.

OEM 2000 Chrysler Cirrus Axle Shaft

Car Axle Shaft

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Axle Shafts found

View related parts
2000 Chrysler Cirrus Axle Assembly, Front Driver Side Part Number: 5017654AA
Product Specifications
- Other Name: Shaft - Axle Half; CV Axle Assembly, Front Left; Shaft Axle Half
- Position: Front Driver Side
- Replaces: RX017654AA, 4593449AA
- Item Weight: 16.30 Pounds
- Item Dimensions: 4.7 x 4.9 x 31.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5017654AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2000 Chrysler Cirrus Submodels:
- LX, LXi | 2.0L L4, 2.4L L4, 2.5L V6, 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS, 6 Cyl 2.5 L GAS
View related parts
2000 Chrysler Cirrus Axle Assembly, Front Passenger Side Part Number: 5017653AA
Product Specifications
- Other Name: Shaft - Axle Half; CV Axle Assembly, Front Right; Shaft Axle Half
- Position: Front Passenger Side
- Replaces: RL017653AA, 4593448AB, 4593448AA, RX017653AA
- Item Weight: 22.20 Pounds
- Item Dimensions: 44.3 x 5.0 x 5.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5017653AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2000 Chrysler Cirrus Submodels:
- LX, LXi | 2.0L L4, 2.4L L4, 2.5L V6, 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS, 6 Cyl 2.5 L GAS

2000 Chrysler Cirrus Axle Shaft Parts and Q&A

Q: How to Remove and Reinstall an Axle Shaft on 2000 Chrysler Cirrus?
A: In order to take out the axle shaft, loosen the hub nut, lift the vehicle, and take out the tire. Loose the brake caliper, disc and tie rod end. Dislocate the steering knuckle and the bottom ball joint then dislocate the inner tripod joint. Wipe and reassemble parts and tighten all nuts to the required torque.