How to Remove and Install a CV Boot on the Driveshaft on 2000 Chrysler Cirrus?

In order to open the inner tripod joint seal boot, disconnect the driveshaft, remove clamps, and push the boot off. Keep holding bearings and take out snap ring and spider. Installation: To install, it requires a match of the new material that is used in the boot, grease, and clamps to ensure that it is re-installed.

OEM 2000 Chrysler Cirrus CV Boot

Axle Boot

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 CV Boots found

View related parts
2000 Chrysler Cirrus Boot Kit Part Number: 4856674
Product Specifications
- Other Name: Boot Kit - Half Shaft; CV Boot; Outer Boot; Boots; Boot Kit Half Shaft Outer; (Reference)
- Item Weight: 1.00 Pounds
- Item Dimensions: 7.7 x 6.1 x 3.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4856674
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2000 Chrysler Cirrus Submodels:
- LX, LXi | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS, 6 Cyl 2.5 L GAS
View related parts
2000 Chrysler Cirrus Boot Kit, Front Inner Passenger Side Part Number: 4797699
Product Specifications
- Other Name: Bootkit - Halfshaft; CV Joint Boot Kit, Front Left Inner, Front Right Inner; CV Boot; Inner Boot; Boots; Boot Package, Inner CV Right W/ABS; Boot Package, Inner CV Right; Boot Kit Half Shaft Inner
- Position: Front Inner Passenger Side
- Item Weight: 1.30 Pounds
- Item Dimensions: 7.2 x 7.1 x 3.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4797699
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2000 Chrysler Cirrus Submodels:
- LX, LXi | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS, 6 Cyl 2.5 L GAS
View related parts
2000 Chrysler Cirrus Boot Kit, Front Inner Passenger Side Part Number: 4797700
Product Specifications
- Other Name: Boot Kit - Half Shaft; CV Joint Boot Kit, Front Left Inner, Front Right Inner; CV Boot; Inner Boot; Boots; Boot Package, Inner CV Right W/ABS; Boot Package, Inner CV Left; Boot Kit Half Shaft Inner
- Position: Front Inner Passenger Side
- Item Weight: 1.20 Pounds
- Item Dimensions: 5.6 x 3.9 x 4.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4797700
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2000 Chrysler Cirrus Submodels:
- LX, LXi | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS, 6 Cyl 2.5 L GAS

2000 Chrysler Cirrus CV Boot Parts and Q&A

Q: How to Remove and Install a CV Boot on the Driveshaft on 2000 Chrysler Cirrus?
A: In order to open the inner tripod joint seal boot, disconnect the driveshaft, remove clamps, and push the boot off. Keep holding bearings and take out snap ring and spider. Installation: To install, it requires a match of the new material that is used in the boot, grease, and clamps to ensure that it is re-installed.