How to Service and Repair a Release Bearing on 2000 Chrysler Cirrus?

To repair the Clutch Release Bearing, take out the transaxle, and place the lever and the bearing vertically and carefully remove the pivot stud. Inspect the pre-lubricated bearing, substitute it if noisy or rough. Make sure the Teflon-coated fork pocket is clean and install the fork and bearing assembly onto the input shaft before putting the transaxle back.

OEM 2000 Chrysler Cirrus Release Bearing

Clutch Release Throw Out Bearing

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Release Bearing found

View related parts
2000 Chrysler Cirrus Release Bearing Part Number: 4670026AB
$123.08 MSRP: $182.00
You Save: $58.92 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bearing - Clutch Release; Clutch Release Bearings; Clutch Release Bearing; Clutch Kit; Bearing Clutch Release
- Item Weight: 0.80 Pounds
- Item Dimensions: 3.7 x 2.5 x 1.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4670026AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2000 Chrysler Cirrus Submodels:
- LX, LXi | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS, 6 Cyl 2.5 L GAS

2000 Chrysler Cirrus Release Bearing Parts and Q&A

Q: How to Service and Repair a Release Bearing on 2000 Chrysler Cirrus?
A: To repair the Clutch Release Bearing, take out the transaxle, and place the lever and the bearing vertically and carefully remove the pivot stud. Inspect the pre-lubricated bearing, substitute it if noisy or rough. Make sure the Teflon-coated fork pocket is clean and install the fork and bearing assembly onto the input shaft before putting the transaxle back.