How to Service and Repair a Power Steering Pressure Switch on 2000 Chrysler Cirrus?

To repair the power steering pressure switch disconnect the negative cable of the battery, jack the vehicle up and remove the switch with the help of a crow foot. Install the new switch, tighten to 16 Nm, reattach the wiring, fill with Mopar Power Steering Fluid, reconnect the battery and bleed the system.

OEM 2000 Chrysler Cirrus Power Steering Pressure Switch

Power Steering Oil Pressure Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Power Steering Pressure Switch found

View related parts
2000 Chrysler Cirrus Power Steering Pressure Switch, Front Part Number: 4606045
$60.71 MSRP: $91.00
You Save: $30.29 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch - Power Steering; Power Steering Pressure Switch, Front; Switch; Gear Assembly, Power Steering Spo Proportional; Module, Solenoid Control Valve W/Bracket; Switches.
- Position: Front
- Item Weight: 0.70 Pounds
- Item Dimensions: 3.0 x 1.5 x 1.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4606045
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2000 Chrysler Cirrus Submodels:
- LX, LXi | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS, 6 Cyl 2.5 L GAS

2000 Chrysler Cirrus Power Steering Pressure Switch Parts and Q&A

Q: How to Service and Repair a Power Steering Pressure Switch on 2000 Chrysler Cirrus?
A: To repair the power steering pressure switch disconnect the negative cable of the battery, jack the vehicle up and remove the switch with the help of a crow foot. Install the new switch, tighten to 16 Nm, reattach the wiring, fill with Mopar Power Steering Fluid, reconnect the battery and bleed the system.