How to Service and Repair a Crankshaft Seal on 2000 Chrysler Concorde?

In order to fix the crankshaft main bearing seal, the transaxle and drive plate should be taken out. Extract the seal with a screwdriver, and not the crankshaft face. Brush off any burrs, fit Special Tool 6926-1 and install the new seal with Tool 6926-2 until it snaps. Install the transaxle and drive plate again.

OEM 2000 Chrysler Concorde Crankshaft Seal

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

5 Crankshaft Seals found

View related parts
2000 Chrysler Concorde Oil Seal, Front Part Number: 4792317AB
$18.56 MSRP: $26.70
You Save: $8.14 (31%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Seal - Crankshaft Oil; Engine Crankshaft Seal, Front; Timing Cover Gasket; Timing Cover Seal; Crankshaft Seal; Front Crank Seal; Timing Cover Assy; Front Main Crankshaft Seal.
- Position: Front
- Replaces: 4792317, 4273275
- Item Weight: 0.50 Pounds
- Item Dimensions: 0.6 x 1.9 x 1.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4792317AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2000 Chrysler Concorde Submodels:
- Base, Limited, LX, LXi | 3.2L V6, 3.5L V6, 6 Cyl 3.2 L GAS, 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS, 6 Cyl 3.5 L GAS
View related parts
2000 Chrysler Concorde Rear Main Seal Part Number: 4663625
$32.82 MSRP: $42.24
You Save: $9.42 (23%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Seal - Rear Main Crankshaft; Engine Crankshaft Seal, Rear; Rear Main Seal Gasket; Seal Rear Main Crankshaft See Note; Seal Rear Main Crankshaft
- Position: Rear
- Item Weight: 0.50 Pounds
- Item Dimensions: 4.8 x 4.7 x 0.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4663625
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2000 Chrysler Concorde Submodels:
- LX, LXi, Limited | 6 Cyl 2.7 L GAS, 6 Cyl 3.2 L GAS, 6 Cyl 3.5 L GAS
View related parts
2000 Chrysler Concorde Front Crank Seal Part Number: 4663618
$20.20 MSRP: $29.95
You Save: $9.75 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Seal - Crankshaft Oil; Engine Crankshaft Seal, Front; Engine Timing Cover Seal; Timing Cover Gasket; Timing Cover Seal; Front Seal; Crankshaft Oil Front; Engine Crankshaft Seal.
- Position: Front
- Item Weight: 0.40 Pounds
- Item Dimensions: 0.2 x 2.1 x 2.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4663618
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2000 Chrysler Concorde Submodels:
- LX | 6 Cyl 2.7 L GAS
View related parts
2000 Chrysler Concorde Rear Main Seal Retainer Part Number: 4663622
Product Specifications
- Other Name: Cover - Crankshaft Rear Oil Seal; Retainer Crankshaft Rear Oil Seal
- Position: Rear
- Item Weight: 0.50 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4663622
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2000 Chrysler Concorde Submodels:
- LX | 6 Cyl 2.7 L GAS
View related parts
2000 Chrysler Concorde Rear Main Seal Part Number: 4663870
Product Specifications
- Other Name: Retainer - Crankshaft Rear Oil Seal; Engine Crankshaft Seal; Crankshaft Seal; Rear Main Seal Retainer; Retainer Crankshaft Rear Oil Seal See Note; Retainer Crankshaft Rear Oil Seal
- Position: Rear
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4663870
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2000 Chrysler Concorde Submodels:
- LXi, Limited | 6 Cyl 3.2 L GAS, 6 Cyl 3.5 L GAS

2000 Chrysler Concorde Crankshaft Seal Parts and Q&A

Q: How to Service and Repair a Crankshaft Seal on 2000 Chrysler Concorde?
A: In order to fix the crankshaft main bearing seal, the transaxle and drive plate should be taken out. Extract the seal with a screwdriver, and not the crankshaft face. Brush off any burrs, fit Special Tool 6926-1 and install the new seal with Tool 6926-2 until it snaps. Install the transaxle and drive plate again.