How to Safely Replace the Air Bag Control Module in a Five-Passenger on 2000 Chrysler LHS?

To change the Air Bag Control Module, remove the negative battery cable. Remove components as needed such as the Instrument Panel and Console side panels to access the Occupant Restraint Controller (ORC). Disconnect the ORC, remove mounting screws and install the new module. Reconnect to the battery and check the air bag system.

OEM 2000 Chrysler LHS Air Bag Control Module

SRS Airbag Module

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Air Bag Control Modules found

View related parts
2000 Chrysler LHS Control Module Part Number: 4602430AE
Product Specifications
- Other Name: Module - Air Bag Control; Air Bag Control Module; SDM Module; Diagnostic Unit; Module Air Bag Control
- Replaces: 4602430AD
- Item Weight: 1.20 Pounds
- Item Dimensions: 5.4 x 4.8 x 4.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4602430AE
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2000 Chrysler LHS Submodels:
- Base | 6 Cyl 3.5 L GAS
View related parts
2000 Chrysler LHS SDM Module Part Number: 4602420AE
Product Specifications
- Other Name: Module - Air Bag Control; Air Bag Control Module; Diagnostic Unit; Module Air Bag Control
- Replaces: 4602420AD
- Item Weight: 1.20 Pounds
- Item Dimensions: 15.5 x 3.5 x 3.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4602420AE
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2000 Chrysler LHS Submodels:
- Base | 6 Cyl 3.5 L GAS

2000 Chrysler LHS Air Bag Control Module Parts and Q&A

Q: How to Safely Replace the Air Bag Control Module in a Five-Passenger on 2000 Chrysler LHS?
A: To change the Air Bag Control Module, remove the negative battery cable. Remove components as needed such as the Instrument Panel and Console side panels to access the Occupant Restraint Controller (ORC). Disconnect the ORC, remove mounting screws and install the new module. Reconnect to the battery and check the air bag system.