How to Service and Repair Engine Mounts on Both Sides on 2000 Chrysler LHS?

Raising the vehicle on a hoist should be done first for service and repair of the left and right engine mounts. Take away the isolator nuts that hold the top of the mounting bracket. Place a jack under the engine and put a block of wood stretchwide over the oil pan. After that, take off the nuts that hold the isolator to the bottom of the frame. Lift the engine using the jack until you can slide the isolator with the heat shield off its base. During installation, first attach the isolator mount with the heat shield to the frame and then, with help, lower the engine onto the insulator. After you've removed the jack, set the isolator to frame nuts to a torque of 61 Nm (45 ft. lbs.). Set the upper mounting nuts and apply 61 Nm of pressure before dropping the vehicle. Surface cracks on engine hydro-mount isolators should not worry you, as they do not reduce performance. The isolators should simply be changed if there is fluid leakage or if other problems, including structural damage, are found.

OEM 2000 Chrysler LHS Engine Mount

Engine Motor Mount

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

5 Engine Mounts found

View related parts
2000 Chrysler LHS Front Mount, Driver Side Part Number: 4593287AB
$27.86 MSRP: $160.00
You Save: $132.14 (83%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Support - Engine Support; Engine Mount, Left; Engine Mount Torque Strut; Engine Mount Bracket; Motor Mount; Front Insulator; Mount
- Position: Driver Side
- Item Weight: 4.70 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4593287AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2000 Chrysler LHS Submodels:
- Base | 6 Cyl 3.5 L GAS
View related parts
2000 Chrysler LHS Mounting Bracket, Passenger Side Part Number: 4593182
Product Specifications
- Other Name: Bracket - Engine Mount; Engine Mount Bracket, Right; Engine Mount Torque Strut; Motor Mount; Mount Bracket; Bracket Engine Mount; Engine Mount Bracket
- Position: Passenger Side
- Item Weight: 2.20 Pounds
- Item Dimensions: 10.3 x 10.6 x 10.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4593182
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2000 Chrysler LHS Submodels:
- Base | 6 Cyl 3.5 L GAS
View related parts
2000 Chrysler LHS Front Mount, Passenger Side Part Number: 4593184AB
Product Specifications
- Other Name: Support - Engine Support; Engine Mount, Front, Front Right, Right; Engine Mount Bracket; Motor Mount; Mount
- Position: Passenger Side
- Item Weight: 5.30 Pounds
- Item Dimensions: 5.4 x 4.5 x 4.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4593184AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2000 Chrysler LHS Submodels:
- Base | 6 Cyl 3.5 L GAS
View related parts
2000 Chrysler LHS Front Mount, Driver Side Part Number: 4593285AB
Product Specifications
- Other Name: Support - Engine Support; Engine Mount, Front, Front Left, Left; Engine Mount Bracket; Motor Mount; Mount
- Position: Driver Side
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4593285AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2000 Chrysler LHS Submodels:
- Base | 6 Cyl 3.5 L GAS
View related parts
2000 Chrysler LHS Mounting Bracket, Driver Side Part Number: 4593245
Product Specifications
- Other Name: Bracket - Engine Mount; Engine Mount Bracket, Left; Engine Mount Torque Strut; Motor Mount; Mount Bracket; Bracket Engine Mount; Engine Mount Bracket
- Position: Driver Side
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4593245
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2000 Chrysler LHS Submodels:
- Base | 6 Cyl 3.5 L GAS

2000 Chrysler LHS Engine Mount Parts and Q&A

Q: How to Service and Repair Engine Mounts on Both Sides on 2000 Chrysler LHS?
A: Raising the vehicle on a hoist should be done first for service and repair of the left and right engine mounts. Take away the isolator nuts that hold the top of the mounting bracket. Place a jack under the engine and put a block of wood stretchwide over the oil pan. After that, take off the nuts that hold the isolator to the bottom of the frame. Lift the engine using the jack until you can slide the isolator with the heat shield off its base. During installation, first attach the isolator mount with the heat shield to the frame and then, with help, lower the engine onto the insulator. After you've removed the jack, set the isolator to frame nuts to a torque of 61 Nm (45 ft. lbs.). Set the upper mounting nuts and apply 61 Nm of pressure before dropping the vehicle. Surface cracks on engine hydro-mount isolators should not worry you, as they do not reduce performance. The isolators should simply be changed if there is fluid leakage or if other problems, including structural damage, are found.