How to Service and Repair a Left Engine Mount on Chrysler LHS?

Before servicing the left engine mount, first lift the vehicle on a hoist and remove the isolator nuts from the top of the mounting bracket. Place a block of wood on top of the jack under the entire oil pan, making sure to use a jack. Once on the oil pan, remove the lower nuts fastening the isolator to the frame. Features Initially, install the isolator mount all the way forward, with only the heat shield attached and then put the engine on. Post-jack removal, fasten the isolator to frame nuts with 61 Nm (45 ft. lbs. of torque) and attach the upper nuts to the mount, tightening them the same. When you're done with the installation, lower the vehicle to the ground.

How to Service and Repair the Right Engine Mount on Chrysler LHS?

Raise the vehicle using a hoist then unfasten the isolator attaching nuts from the top of the bracket for the mount you are servicing. Place a jack under the engine and set a block of wood across the pan for support, then undo the nuts below the isolator's base. Raise the engine while on the jack enough to allow you to take off the isolator with the heat shield. Install the isolator mount and heat shield to the frame, put the engine on the isolator and then lower it onto the mount. As soon as you remove the jack, fasten the isolator to frame nuts using an effort of 61 Nm (45 ft. lbs.) and also tighten the upper attaching nuts to the mount with the same force. The last step is slowly lower the vehicle to the ground.

OEM Chrysler LHS Engine Mount

Engine Motor Mount

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

11 Engine Mounts found

View related parts
Chrysler LHS Front Mount, Driver Side Part Number: 4593287AB
$27.86 MSRP: $160.00
You Save: $132.14 (83%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Support - Engine Support; Engine Mount, Left; Engine Mount Torque Strut; Engine Mount Bracket; Motor Mount; Front Insulator; Mount
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1999-2001 Chrysler LHS | Base | 6 Cyl 3.5 L GAS
View related parts
Chrysler LHS Mounting Bracket, Passenger Side Part Number: 4593182
Product Specifications
- Other Name: Bracket - Engine Mount; Engine Mount Bracket, Right; Engine Mount Torque Strut; Motor Mount; Mount Bracket; Bracket Engine Mount; Engine Mount Bracket
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1999-2001 Chrysler LHS | Base | 6 Cyl 3.5 L GAS
View related parts
Chrysler LHS Front Mount, Passenger Side Part Number: 4593184AB
Product Specifications
- Other Name: Support - Engine Support; Engine Mount, Front, Front Right, Right; Engine Mount Bracket; Motor Mount; Mount
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1999-2001 Chrysler LHS | Base | 6 Cyl 3.5 L GAS
View related parts
Chrysler LHS Mount Part Number: 4663228
Product Specifications
- Other Name: Support; Engine Mount Bracket; Transmission Mount; Motor Mount; Support Assembly, Transmission Mount; Support Transmission Mount
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1994-1997 Chrysler LHS | Base | 6 Cyl 3.5 L GAS
View related parts
Chrysler LHS Front Mount, Driver Side Part Number: 4593285AB
Product Specifications
- Other Name: Support - Engine Support; Engine Mount, Front, Front Left, Left; Engine Mount Bracket; Motor Mount; Mount
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1999-2000 Chrysler LHS | Base | 6 Cyl 3.5 L GAS
View related parts
Chrysler LHS Mounting Bracket, Driver Side Part Number: 4593245
Product Specifications
- Other Name: Bracket - Engine Mount; Engine Mount Bracket, Left; Engine Mount Torque Strut; Motor Mount; Mount Bracket; Bracket Engine Mount; Engine Mount Bracket
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1999-2001 Chrysler LHS | Base | 6 Cyl 3.5 L GAS
View related parts
Chrysler LHS Front Mount Bracket Part Number: 4593241
Product Specifications
- Other Name: Bracket Engine Mounting Left; Insulator Bracket; Mount; Bracket, Engine Mount Left; Bracket Engine Mount
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1996-1997 Chrysler LHS | Base | 6 Cyl 3.5 L GAS
View related parts
Chrysler LHS Support Bracket Part Number: 4593240
Product Specifications
- Other Name: Bracket Engine Mounting Right; Engine Mount Torque Strut; Engine Mount Bracket; Motor Mount; Front Mount Bracket; Rear Mount Bracket; Insulator Bracket; Mount; Bracket, Engine Mount Right; Bracket Engine Mount
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1996-1997 Chrysler LHS | Base | 6 Cyl 3.5 L GAS
View related parts
Chrysler LHS Front Mount Part Number: 4593239
Product Specifications
- Other Name: Support - Engine Mount; Mount; Insulator; Insulator Assembly, Engine (Must BE Replaced In Pairs); Support Engine Mount
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1996-1997 Chrysler LHS | Base | 6 Cyl 3.5 L GAS
View related parts
Chrysler LHS Rear Mount Part Number: 4663228AB
Product Specifications
- Other Name: Insulator - Transmission Mount; Rear Insulator
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1994-1997 Chrysler LHS | Base | 6 Cyl 3.5 L GAS
View related parts
Chrysler LHS Front Mount Part Number: 4663526AB
Product Specifications
- Other Name: Support - Engine Mount; Front Insulator; Mount; Insulator
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1994-1996 Chrysler LHS | Base | 6 Cyl 3.5 L GAS

Chrysler LHS Engine Mount

Choose OEM Engine Mount that meet Chrysler factory standards. Chrysler designs and tests every component for precision and durability. Each Engine Mount follows strict manufacturing steps to lock in quality and fit. If your Chrysler LHS matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine LHS parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

The Engine Mount is one of those parts which can be considered as a genuine example of durability and powerful performance for the Chrysler LHS serials. Manufactured to reduce noise and vibration at the same time as guaranteeing safe positioning of the engine and transaxle, the role of the Engine Mount is to increase friendly environment during driving as well as the levels of safety in the car. Applicable to several Chrysler LHS models manufactured from 1994 to 2001, this Engine Mount guarantees that the engine is securely fixed in position in order not to cause harm to another part. There are conventional rubber Engine Mounts, fluid filled hydraulic Engine Mounts, and the newest and the most complex electronic active Engine Mounts available in Chrysler LHS. For example, the hydraulic mounts improve the amplitude of vibrations that they can absorb, while the active ones alter the dynamic stiffness depending on the revolutions per minute. This not only increases the efficiency of the Chrysler LHS but also provides comfort during the car, and result as a smooth driving. Hence the Engine Mount gains reputation to other vehicle engine models due to its capability of enduring the harsh conditions of driving hence considered a perfect model in the automobile industry. As a high performing luxury sedan, Chrysler is still able to offer the Engine Mount for the car so that more people can take comfort in this considerable Chrysler LHS model.

Chrysler LHS Engine Mount Parts and Q&A

Front Mount, Driver Side
4593287AB
Q: How to Service and Repair a Left Engine Mount on Chrysler LHS?
A:
Before servicing the left engine mount, first lift the vehicle on a hoist and remove the isolator nuts from the top of the mounting bracket. Place a block of wood on top of the jack under the entire Oil Pan, making sure to use a jack. Once on the oil pan, remove the lower nuts fastening the isolator to the frame. Features Initially, install the isolator mount all the way forward, with only the heat shield attached and then put the engine on. Post-jack removal, fasten the isolator to frame nuts with 61 Nm (45 ft. lbs. of torque) and attach the upper nuts to the mount, tightening them the same. When you're done with the installation, lower the vehicle to the ground.
Mounting Bracket, Passenger Side
4593182
Q: How to Service and Repair the Right Engine Mount on Chrysler LHS?
A:
Raise the vehicle using a hoist then unfasten the isolator attaching nuts from the top of the bracket for the mount you are servicing. Place a jack under the engine and set a block of wood across the pan for support, then undo the nuts below the isolator's base. Raise the engine while on the jack enough to allow you to take off the isolator with the heat shield. Install the isolator mount and heat shield to the frame, put the engine on the isolator and then lower it onto the mount. As soon as you remove the jack, fasten the isolator to frame nuts using an effort of 61 Nm (45 ft. lbs.) and also tighten the upper attaching nuts to the mount with the same force. The last step is slowly lower the vehicle to the ground.