Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us

OEM 2000 Dodge Dakota Drive Shaft

Axle Shaft
  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Drive Shafts found

  • 2000 Dodge Dakota Drive Shaft - 52105603AD
    2000 Dodge Dakota Drive Shaft Diagram - 52105603AD
    View related parts

    2000 Dodge Dakota Drive Shaft Part Number: 52105603AD

    $513.83
    Ships in 1-2 Business Days
    ADD TO CART
    Product Specifications
    • Other Name: Shaft - Drive; Shaft Drive Rear 1-Piece
    • Replaces: 52105603AB, 52105603AC
    • Item Weight: 22.10 Pounds
    • Item Dimensions: 79.3 x 5.2 x 5.3 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 52105603AD
    • Warranty: This genuine part is guaranteed by Mopar's factory warranty.
    More Info
    Fits the following 2000 Dodge Dakota Submodels:
    • Base, Laramie, SLT, SLT Plus, ST, SXT, Sport, Sport Plus | 6 Cyl 3.9 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS
  • 2000 Dodge Dakota Drive Shaft - 52105600AA
    2000 Dodge Dakota Drive Shaft Diagram - 52105600AA
    View related parts

    2000 Dodge Dakota Drive Shaft Part Number: 52105600AA

    Product Specifications
    • Other Name: Shaft - Drive; Driveshaft; Shaft Drive Rear 1-Piece; Shaft Drive
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 52105600AA
    • Warranty: This genuine part is guaranteed by Mopar's factory warranty.
    Fits the following 2000 Dodge Dakota Submodels:
    • Base, R/T, SLT, SXT, Sport | 4 Cyl 2.5 L GAS, 6 Cyl 3.9 L GAS, 8 Cyl 4.7 L GAS, 8 Cyl 5.2 L GAS, 8 Cyl 5.9 L GAS
  • 2000 Dodge Dakota Drive Shaft - 52105950AD
    2000 Dodge Dakota Drive Shaft Diagram - 52105950AD
    View related parts

    2000 Dodge Dakota Drive Shaft Part Number: 52105950AD

    Product Specifications
    • Other Name: Shaft - Drive; Driveshaft; Shaft Drive Rear 1-Piece
    • Replaces: 52105950AC
    • Item Weight: 22.30 Pounds
    • Item Dimensions: 83.0 x 5.2 x 5.1 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 52105950AD
    • Warranty: This genuine part is guaranteed by Mopar's factory warranty.
    More Info
    Fits the following 2000 Dodge Dakota Submodels:
    • R/T, SLT, Sport | 5.9L V8, 8 Cyl 5.9 L GAS

2000 Dodge Dakota Drive Shaft Parts and Q&A

  • Q: How to Service and Repair a Drive Shaft for Rear on 2000 Dodge Dakota?
    A: Before inspecting the rear propeller shaft, set safety stands under the car and put the transmission in the Neutral gear. On the axle companion flange and yoke, record a line that will help during installation and if your vehicle is equipped with a shield and center bearing, also mark their outlines on the corresponding parts. If there is a support bracket, remove the bolts holding the center bearing and heat shield to it and then remove the bolts keeping the companion yoke attached to the companion flange. Slide the yoke off the transmission or transfer case shaft to remove the propeller shaft. To set up the slip yoke, attach it to the end of the transmission or transfer case shaft, install the center bearing as needed, fit the heat shield to the support bracket and tighten all bolts to 68 Nm (50 ft. lbs.) torque. Place the installation reference marks over the companion flange and yoke on the companion flange, put the companion yoke onto that flange and thread the bolts in with 108 Nm (80 ft. lbs.) torque prior to lowering the vehicle.

Related 2000 Dodge Dakota Parts

Alternate Year Models

+
1999 Dodge Dakota Drive Shaft 2001 Dodge Dakota Drive Shaft