How to Correctly Install a Drive Shaft on Dodge Dakota?

Clean the bolts before installing the drive/propeller shaft, applying Mopar(R) Lock & Seal Adhesive or a matching product to the threads. Place the slip yoke onto the end of the transmission/transfer case output shaft so that the indicators are in alignment. If you have a manual transmission, put the vehicle in second gear and match up the marks on the transmission flange and propeller shaft, placing new bolts in them and tightening with 115 Nm (85 ft. lbs.) of torque. If your car has a two-piece propeller shaft, center the center bearing according to the marks, then fasten the bolts so they have 54 Nm (40 ft. lbs.) of torque. Then, place the reference marks on the propeller shaft and pinion flange, put on new companion flange bolts and tighten them to 115 Nm (85 ft. lbs.). If the instructions are not followed, the driveline might start to vibrate.

How to Remove and Replace a Drive Shaft on Dodge Dakota?

First, make sure the vehicle is in neutral and positioned on a hoist before attempting this work. Make sure to draw installation reference marks on the propeller shaft pinion flange and propeller shaft flange. In case the vehicle is manual, label both the manual transmission flange and the propeller shaft. If your vehicle has a center bearing, put marks on the center bearing bracket to help during assembly, then lift the propeller shaft and remove the bolts holding it. After that, pull the propeller shaft bolts by the pinion flange. Take the propeller shaft from the automatic transmission/transfer case output shaft and mark it and the output shaft to help you set them up again. Removing the flange bolts should be done if the car comes with a manual transmission. In the end, remove the propeller shaft from the car, being sure to avoid anything that could cause vibration in the driveline.

OEM Dodge Dakota Drive Shaft

Axle Shaft

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

27 Drive Shafts found

View related parts
Dodge Dakota Drive Shaft Part Number: 52105982AC
$1103.78 MSRP: $1620.00
You Save: $516.22 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Shaft - Drive; Driveshaft; Front Propeller Shaft; Shaft Drive Front; Shaft Drive
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2001-2007 Dodge Dakota | Base, Laramie, SLT, SLT Plus, ST, SXT, Sport, Sport Plus | 4 Cyl 2.5 L GAS, 6 Cyl 3.7 L GAS, 6 Cyl 3.9 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.9 L GAS
View related parts
Dodge Dakota Front Propeller Shaft Part Number: 52123198AB
$1046.44 MSRP: $1595.00
You Save: $548.56 (35%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Shaft - Drive; Driveshaft; Shaft Drive Front
- Replaces: 52123198AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2010 Dodge Dakota | Big Horn, Laramie, Lone Star, SLT, ST, SXT, Sport, TRX4 | 3.7L V6, 4.7L V8, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX
View related parts
Dodge Dakota Drive Shaft Part Number: 52097974AB
$319.51 MSRP: $470.00
You Save: $150.49 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Shaft - Drive; Driveshaft; Shaft Drive
- Replaced by: 52105845AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1996-1999 Dodge Dakota | Base, R/T, SLT, Sport, WS | 4 Cyl 2.5 L GAS, 6 Cyl 3.9 L GAS, 8 Cyl 5.2 L CNG, 8 Cyl 5.2 L GAS, 8 Cyl 5.9 L GAS
View related parts
Dodge Dakota Drive Shaft Part Number: 52098589AC
$407.62 MSRP: $594.00
You Save: $186.38 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Shaft - Drive; Driveshaft
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1997-1999 Dodge Dakota | Base, SLT, Sport | 4 Cyl 2.5 L GAS, 6 Cyl 3.9 L GAS
View related parts
Dodge Dakota Drive Shaft Part Number: 52105603AD
$513.83
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Shaft - Drive; Shaft Drive Rear 1-Piece
- Replaces: 52105603AB, 52105603AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1998-2007 Dodge Dakota | Base, Laramie, SLT, SLT Plus, ST, SXT, Sport, Sport Plus | 3.9L V6, 4.7L V8, 6 Cyl 3.9 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS
View related parts
Dodge Dakota Front Propeller Shaft Part Number: 52105981AC
Product Specifications
- Other Name: Shaft - Drive; Driveshaft; Shaft Drive Front; Shaft Drive
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2001-2007 Dodge Dakota | Base, Laramie, SLT, SLT Plus, ST, SXT, Sport, Sport Plus | 4 Cyl 2.5 L GAS, 6 Cyl 3.7 L GAS, 6 Cyl 3.9 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.9 L GAS
View related parts
Dodge Dakota Drive Shaft Part Number: 52123141AA
Product Specifications
- Other Name: Shaft - Drive; Driveshaft; Shaft Drive Rear 1-Piece
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2006-2007 Dodge Dakota | Laramie, SLT, ST | 6 Cyl 3.7 L GAS
View related parts
Dodge Dakota Front Propeller Shaft Part Number: 52123199AB
Product Specifications
- Other Name: Shaft - Drive; Driveshaft; Shaft Drive Front
- Replaces: 52123199AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2009 Dodge Dakota | Big Horn, Laramie, Lone Star, SLT, ST, SXT, Sport, TRX4 | 3.7L V6, 4.7L V8, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX
View related parts
Dodge Dakota Drive Shaft Part Number: 52105598AA
Product Specifications
- Other Name: Shaft - Drive; Shaft Drive Rear 1-Piece; Shaft Drive
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2001-2007 Dodge Dakota | Base, Laramie, R/T, SLT, SLT Plus, ST, SXT, Sport, Sport Plus | 4 Cyl 2.5 L GAS, 6 Cyl 3.7 L GAS, 6 Cyl 3.9 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.9 L GAS
View related parts
Dodge Dakota Drive Shaft, Front Part Number: 53005551
Product Specifications
- Other Name: Shaft, Front Propeller; Driveshaft; Propeller Shaft; Front Propeller Shaft; Shaft, Front (Dana) Propeller
- Position: Front
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1987-1997 Dodge Dakota | Base, LE, S, SE, SLT, Shelby, Sport, WS | 4 Cyl 2.2 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.9 L GAS, 8 Cyl 5.2 L CNG, 8 Cyl 5.2 L GAS
View related parts
Dodge Dakota Drive Shaft Part Number: 52123145AA
Product Specifications
- Other Name: Shaft - Drive; Driveshaft; Shaft Drive Rear 1-Piece
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2005-2007 Dodge Dakota | Laramie, SLT, ST, Sport | 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS
View related parts
Dodge Dakota Drive Shaft Part Number: 52105602AB
Product Specifications
- Other Name: Shaft - Drive; Driveshaft; Shaft Drive Rear 1-Piece
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2001-2004 Dodge Dakota | Base, SLT, SLT Plus, SXT, Sport, Sport Plus | 6 Cyl 3.9 L GAS, 8 Cyl 4.7 L GAS
View related parts
Dodge Dakota Drive Shaft Part Number: 52105600AA
Product Specifications
- Other Name: Shaft - Drive; Driveshaft; Shaft Drive Rear 1-Piece; Shaft Drive
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1998-2003 Dodge Dakota | Base, R/T, SLT, SXT, Sport | 4 Cyl 2.5 L GAS, 6 Cyl 3.9 L GAS, 8 Cyl 4.7 L GAS, 8 Cyl 5.2 L GAS, 8 Cyl 5.9 L GAS
View related parts
Dodge Dakota Drive Shaft Part Number: 52105592AA
Product Specifications
- Other Name: Shaft - Drive; Driveshaft; Shaft Drive Rear 1-Piece; Shaft Drive
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2001-2004 Dodge Dakota | Base, R/T, SLT, SLT Plus, SXT, Sport, Sport Plus | 4 Cyl 2.5 L GAS, 6 Cyl 3.7 L GAS, 6 Cyl 3.9 L GAS, 8 Cyl 4.7 L GAS, 8 Cyl 5.9 L GAS
View related parts
Dodge Dakota Drive Shaft, Rear Part Number: 52098366
Product Specifications
- Other Name: Rear 2 Piece; Driveshaft; Shaft, Two Piece, W/Center Bearing And Sliding Yoke
- Position: Rear
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1996 Dodge Dakota | Base, SLT, Sport, WS | 4 Cyl 2.5 L GAS, 6 Cyl 3.9 L GAS
View related parts
Dodge Dakota Drive Shaft Part Number: 52123001AA
Product Specifications
- Other Name: Shaft - Drive; Driveshaft; Shaft Drive Rear 1-Piece
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2005-2009 Dodge Dakota | Big Horn, Laramie, Lone Star, SLT, ST, SXT, Sport, TRX, TRX4 | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS
View related parts
Dodge Dakota Drive Shaft Part Number: 52105599AB
Product Specifications
- Other Name: Shaft - Drive; Driveshaft; Shaft Drive Rear 1-Piece
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2001-2004 Dodge Dakota | Base, SLT, SLT Plus, SXT, Sport, Sport Plus | 4 Cyl 2.5 L GAS, 6 Cyl 3.7 L GAS, 6 Cyl 3.9 L GAS, 8 Cyl 4.7 L GAS, 8 Cyl 5.9 L GAS
View related parts
Dodge Dakota Drive Shaft Part Number: 52105857AA
Product Specifications
- Other Name: Shaft - Drive; Driveshaft; Shaft Drive
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1996 Dodge Dakota | Base, SLT, Sport, WS | 6 Cyl 3.9 L GAS
View related parts
Dodge Dakota Drive Shaft Part Number: 52099207AB
Product Specifications
- Other Name: Shaft - Drive; Driveshaft; Shaft Drive
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1996-1999 Dodge Dakota | Base, SLT, Sport, WS | 6 Cyl 3.9 L GAS, 8 Cyl 5.2 L GAS
View related parts
Dodge Dakota Drive Shaft Part Number: 52105611AB
Product Specifications
- Other Name: Shaft - Drive; Driveshaft; Shaft Drive Rear 1-Piece
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2001-2005 Dodge Dakota | Base, Laramie, SLT, SLT Plus, ST, SXT, Sport, Sport Plus | 4 Cyl 2.5 L GAS, 6 Cyl 3.7 L GAS, 6 Cyl 3.9 L GAS, 8 Cyl 4.7 L GAS, 8 Cyl 5.9 L GAS

| Page 1 of 2 |Next >

1-20 of 27 Results

Dodge Dakota Drive Shaft

Choose OEM Drive Shaft that meet Dodge factory standards. Dodge designs and tests every component for precision and durability. Each Drive Shaft follows strict manufacturing steps to lock in quality and fit. If your Dodge Dakota matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Dakota parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

The Drive Shaft used in Dodge Dakota vehicles works in the same way that any common automobile Drive Shaft by transmitting mechanical power and torque from the engine or transmission towards the drive wheels, that is, for the efficient functioning of the vehicle. This component is intended to withstand torsional and shear loads and at the same time be lightweight in order to minimize inertia. Available on Dodge Dakota Drive Shafts there is the universal joint which fits in a very similar manner to the splined joint to cope with alterations in the position of the engine and rear axle. Through the years of production Dodge Dakota has used various types of Drive Shafts these being one piece and two piece. The ordinary two-piece Drive Shaft is especially designed to be an excellent crash safety product. The selected vehicles' power distribution systems are represented by multiple Drive Shafts in the four-wheel and all-wheel drive configurations, the transfer cases are used to distribute the power between the front and rear axles. Thus, the Drive Shaft can be regarded as one of the essential components that help to enhance the performance and durability of Dodge Dakota vehicles.

Dodge Dakota Drive Shaft Parts and Q&A

Drive Shaft
52105982AC
Q: How to Correctly Install a Drive Shaft on Dodge Dakota?
A:
Clean the bolts before installing the drive/propeller shaft, applying Mopar(R) Lock & Seal Adhesive or a matching product to the threads. Place the slip yoke onto the end of the transmission/transfer case output shaft so that the indicators are in alignment. If you have a manual transmission, put the vehicle in second gear and match up the marks on the transmission flange and propeller shaft, placing new bolts in them and tightening with 115 Nm (85 ft. lbs.) of torque. If your car has a two-piece propeller shaft, center the center bearing according to the marks, then fasten the bolts so they have 54 Nm (40 ft. lbs.) of torque. Then, place the reference marks on the propeller shaft and pinion flange, put on new companion flange bolts and tighten them to 115 Nm (85 ft. lbs.). If the instructions are not followed, the driveline might start to vibrate.
Front Propeller Shaft
52123198AB
Q: How to Remove and Replace a Drive Shaft on Dodge Dakota?
A:
First, make sure the vehicle is in neutral and positioned on a hoist before attempting this work. Make sure to draw installation reference marks on the propeller shaft pinion flange and propeller shaft flange. In case the vehicle is manual, label both the manual transmission flange and the propeller shaft. If your vehicle has a center bearing, put marks on the center bearing bracket to help during assembly, then lift the propeller shaft and remove the bolts holding it. After that, pull the propeller shaft bolts by the pinion flange. Take the propeller shaft from the automatic transmission/transfer case output shaft and mark it and the output shaft to help you set them up again. Removing the flange bolts should be done if the car comes with a manual transmission. In the end, remove the propeller shaft from the car, being sure to avoid anything that could cause vibration in the driveline.