Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us

OEM 2000 Dodge Dakota Release Bearing

Clutch Release Throw Out Bearing
  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Release Bearing found

  • 2000 Dodge Dakota Release Bearing - 53008342
    2000 Dodge Dakota Release Bearing - 53008342
    2000 Dodge Dakota Release Bearing - 53008342
    2000 Dodge Dakota Release Bearing - 53008342
    2000 Dodge Dakota Release Bearing Diagram - 53008342
    View related parts

    2000 Dodge Dakota Release Bearing Part Number: 53008342

    $153.85 MSRP: $231.00
    You Save: $77.15 (34%)
    Ships in 1-2 Business Days
    ADD TO CART
    Product Specifications
    • Other Name: Bearing - Clutch Release; Clutch Release Bearings; Clutch Release Bearing; Clutch Kit; Bearing Assembly, With Sleeve, Clutch Release 1990-91; For 3.9 L, 5.2 L, 5.9 L Engines.
    • Replaces: 53008342AB
    • Item Weight: 1.50 Pounds
    • Item Dimensions: 3.2 x 4.9 x 5.3 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 53008342
    • Warranty: This genuine part is guaranteed by Mopar's factory warranty.
    More Info
    Fits the following 2000 Dodge Dakota Submodels:
    • Base, Big Horn, LE, Laramie, Lone Star, R/T, S, SE, SLT, SLT Plus, ST, SXT, Sport, Sport Plus, TRX, TRX4, WS | 4 Cyl 2.5 L GAS, 6 Cyl 3.7 L GAS, 6 Cyl 3.9 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.2 L CNG, 8 Cyl 5.2 L GAS, 8 Cyl 5.9 L GAS

2000 Dodge Dakota Release Bearing Parts and Q&A

  • Q: How to Service and Repair a Release Bearing on 2000 Dodge Dakota?
    A: To access the Clutch Release Bearing, you need to remove the transmission before anything else. After that, separate the release bearing from the fork and take out the bearing. Check the front bearing retainer release slide's surface and if it is scratched, worn or damaged, change out the retainer. Make sure the fork is straight and not damaged and that the pivot is strong and undamaged. Should the release fork retainer spring be damaged or deformed, you should replace it. Apply a light amount of Mopar high temperature bearing grease to the pilot bearing, the splines on the input shaft, bearing retainer slide surface, fork pivot and release fork pivot area. After that, secure the release fork and bearing into place, install the transmission and reassemble everything.

Related 2000 Dodge Dakota Parts

Alternate Year Models

+
1999 Dodge Dakota Release Bearing 2001 Dodge Dakota Release Bearing