Can You Replace the Crankshaft Seal Without Removing the Timing Chain Cover on 2000 Dodge Durango?

Unhook the battery's negative cable and take out the engine's vibration damper before continuing. Ensure the front oil seal is aligned to the crankshaft using the seal installation/alignment tool 6635; there should be only a tiny gap where they touch. If the strap does not fit, the cover must be taken off and installed correctly. Take care not to harm the crankshaft seal bore of the cover as you gently pull the oil seal out of the housing. Slide the smaller diameter of the oil seal into the groove of Front Oil Seal Installation Tool 6635. Place the seal and the tool over the middle of the crankshaft and bolt down the damper to hold the seal in place. Afterward, take out the vibration damper bolt and the installation tool, inspect the seal on the vibration damper, attach the vibration damper and replace the negative cable at the battery.

OEM 2000 Dodge Durango Crankshaft Seal

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Crankshaft Seals found

View related parts
2000 Dodge Durango Oil Seal, Front Part Number: 53021313AA
$10.10 MSRP: $14.85
You Save: $4.75 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Seal - Crankshaft Oil; Engine Crankshaft Seal, Front; Timing Cover Gasket; Timing Cover Seal; Crankshaft Seal; Front Crank Seal; Timing Cover Oil Seal; Engine Crankshaft Seal.
- Position: Front
- Item Weight: 1.40 Pounds
- Item Dimensions: 0.6 x 3.2 x 3.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 53021313AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2000 Dodge Durango Submodels:
- Adventurer, Base, Limited, SE, SLT, SLT Plus, ST, SXT, Sport | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS
View related parts
2000 Dodge Durango Rear Main Seal Part Number: 53020788AB
$32.91 MSRP: $48.75
You Save: $15.84 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Seal - Crankshaft Oil; Engine Crankshaft Seal, Rear; Crankshaft Seal; Seal Crankshaft Bearing Oil; Seal Crankshaft Oil Rear; Engine Crankshaft Seal
- Position: Rear
- Replaces: 68045792AA
- Item Weight: 0.70 Pounds
- Item Dimensions: 1.0 x 5.1 x 5.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 53020788AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2000 Dodge Durango Submodels:
- Adventurer, Base, Limited, SE, SLT, SLT Plus, ST, SXT, Sport | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS
View related parts
2000 Dodge Durango Rear Main Seal Part Number: 4778228
Product Specifications
- Other Name: Seal Package - Crankshaft; Engine Crankshaft Seal, Rear; Oil Seal Package, Crankshaft; Seal Package Crankshaft; Oil Seal, Crankshaft; Engine Crankshaft Seal; Crankshaft Seal
- Position: Rear
- Item Weight: 0.50 Pounds
- Item Dimensions: 0.4 x 3.5 x 6.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4778228
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2000 Dodge Durango Submodels:
- Base, SLT, SLT Plus, Sport | 8 Cyl 5.2 L GAS
View related parts
2000 Dodge Durango Rear Main Seal Part Number: 4798216AC
Product Specifications
- Other Name: Seal Package - Crankshaft; Engine Crankshaft Seal, Rear; Seal Package Crankshaft; Engine Crankshaft Seal; Crankshaft Seal
- Position: Rear
- Replaces: 4798216AB
- Item Weight: 0.50 Pounds
- Item Dimensions: 0.8 x 2.0 x 3.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4798216AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2000 Dodge Durango Submodels:
- Base, R/T, SLT, SLT Plus, SXT, Sport | 5.9L V8, 8 Cyl 5.9 L GAS

2000 Dodge Durango Crankshaft Seal Parts and Q&A

Q: Can You Replace the Crankshaft Seal Without Removing the Timing Chain Cover on 2000 Dodge Durango?
A: Unhook the battery's negative cable and take out the engine's vibration damper before continuing. Ensure the front oil seal is aligned to the crankshaft using the seal installation/alignment tool 6635; there should be only a tiny gap where they touch. If the strap does not fit, the cover must be taken off and installed correctly. Take care not to harm the crankshaft seal bore of the cover as you gently pull the oil seal out of the housing. Slide the smaller diameter of the oil seal into the groove of Front Oil Seal Installation Tool 6635. Place the seal and the tool over the middle of the crankshaft and bolt down the damper to hold the seal in place. Afterward, take out the vibration damper bolt and the installation tool, inspect the seal on the vibration damper, attach the vibration damper and replace the negative cable at the battery.