JeepParts
My Garage
My Account
Cart
OEM 2000 Dodge Durango Drive Belt
Serpentine Belt- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
3 Drive Belts found
2000 Dodge Durango Serpentine Belt Part Number: 53010303AC
$69.07 MSRP: $105.00You Save: $35.93 (35%)Ships in 1-2 Business DaysProduct Specifications- Other Name: Belt - Accessory Drive; Serpentine Belt Drive Kit; Drive Belt; V-Belt
- Replaces: 53010303AB
- Item Weight: 1.00 Pounds
- Item Dimensions: 1.8 x 6.4 x 22.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 53010303AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
2000 Dodge Durango Serpentine Belt Part Number: 5135746AA
$54.45 MSRP: $80.70You Save: $26.25 (33%)Ships in 1-3 Business DaysProduct Specifications- Other Name: Belt - Serpentine; Serpentine Belt Drive Kit; Accessory Drive Belt; Drive Belt; V-Belt; Belt Accessory Drive; Belt Serpentine
- Replaces: 53032125AD, 53032380AE, 53032380AC, 53032380AD
- Item Weight: 0.90 Pounds
- Item Dimensions: 1.0 x 7.4 x 19.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5135746AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
2000 Dodge Durango Serpentine Belt Part Number: 55111074AC
$32.96 MSRP: $48.85You Save: $15.89 (33%)Ships in 1-2 Business DaysProduct Specifications- Other Name: Cap - Coolant Recovery Bottle; Engine, Washer, Radiator Caps; Serpentine & V-Belts; Reservoir Cap; Filler Cap; Reservoir Tank Cap; Recovery Tank Cap; Cap
- Replaces: 55111074AA, 4682828, 5017468AA, 55111074AB
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 55111074AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
2000 Dodge Durango Drive Belt Parts and Q&A
- Q: How to Remove and Install a Drive Belt on 5.2L/5.9L Engines with a Spring-Loaded Automatic Belt Tensioner on 2000 Dodge Durango?A: All belt setups, with or without power steering or air conditioning, make use of the automatic spring-loaded belt tensioner for 5.2L/5.9L engines. To help remove the drive belt, grab a socket/wrench and attach it to the pulley bolt on the automatic tensioner. Turn the tensioner clockwise until the tension on the belt is gone. Start with the belt off the idler pulley, then remove it from the vehicle. When installing anything, guide the serpentine accessory drive belt properly to avoid the engine overheating as a result of the water pump turning backward. Over all the pulleys except the idler pulley, placed between the generator and A/C compressor, fit the drive belt. Again, tighten the pulley mounting bolt of the automatic tensioner with a socket/wrench while turning clockwise, put the belt around the idler pulley and leave it until it returns to its spot. Pull out the wrench and make sure the belt is properly aligned between all pulleys. Look at the marks on the side of the belt, making sure the arrow on the tensioner back is within 3 mm (1/8 inch) of them. Belt usage for 15 minutes or less makes it considered new. If everything does not fit, confirm the correct belt is being used, check on bearing wear in the A/C compressor, power steering pump, water pump, idler pulley or generator, if any pulleys are not secure, ensure accessories are aligned correctly together and verify that the belt is installed exactly as designed.
Related 2000 Dodge Durango Parts
2000 Dodge Durango Radiator
2000 Dodge Durango Water Pump
2000 Dodge Durango Thermostat
2000 Dodge Durango Fan Clutch
2000 Dodge Durango Radiator Cap
2000 Dodge Durango Radiator Hose
2000 Dodge Durango A/C Idler Pulley
2000 Dodge Durango Engine Cooling Fan
2000 Dodge Durango Fan Blade
2000 Dodge Durango Idler Pulley Bolt
2000 Dodge Durango Radiator Support
2000 Dodge Durango Thermostat Housing