How to Service and Repair a Sway Bar Kit on 2000 Dodge Durango?

Before servicing the sway bar kit, lift and hold up the vehicle. Remove the upper link nut, retainer, and grommet from every link and afterwards take out the lower link nut from the lower suspension arm on each side. Following that, take the necessary bolts out, let go of the retainers, and remove the sway bar kit and the bushings from the car. Start by placing the bushings on the sway bar kit, position the bar around the frame, attach with the retainers and bolts tightening to 60 Nm (45 ft. lbs.) as you check if the bar is centered and evenly spaced on each side of the frame. Join the link lower retainer and grommet with the links, then secure both links to the sway bar kit and lower suspension arm, holding the nut tight at 47 Nm (35 ft. lbs.), with both link end caps confronting you straight forward. After that, put the upper link grommet, retainer, and nut in place, fastening all of them tightly at 37 Nm (27 ft. lbs.), remove the support and lower your vehicle.

OEM 2000 Dodge Durango Sway Bar Kit

Stabilizer Sway Bar Set

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

5 Sway Bar Kits found

View related parts
2000 Dodge Durango Stabilizer Bar, Rear Part Number: 52106868AA
Product Specifications
- Other Name: Bar - Rear Suspension; Suspension Stabilizer Bar, Rear; Sway Bar; Stabilizer Bar Rear Suspension
- Position: Rear
- Item Weight: 6.40 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52106868AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2000 Dodge Durango Submodels:
- Base, R/T, SLT, SLT Plus, SXT, Sport | 8 Cyl 4.7 L GAS, 8 Cyl 5.2 L GAS, 8 Cyl 5.9 L GAS
View related parts
2000 Dodge Durango Stabilizer Bar, Front Part Number: 52106726AB
Product Specifications
- Other Name: Bar - Front Suspension; Suspension Stabilizer Bar, Front; Sway Bar; Stabilizer Bar Front
- Position: Front
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52106726AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2000 Dodge Durango Submodels:
- Base, R/T, SLT, SLT Plus, SXT, Sport | 8 Cyl 4.7 L GAS, 8 Cyl 5.2 L GAS, 8 Cyl 5.9 L GAS
View related parts
2000 Dodge Durango Stabilizer Bar, Front Part Number: 52106378AA
Product Specifications
- Other Name: Bar - Front Sway; Suspension Stabilizer Bar, Front; Sway Bar; Bar Front Sway
- Position: Front
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52106378AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2000 Dodge Durango Submodels:
- Base, R/T, SLT, SLT Plus, SXT, Sport | 8 Cyl 4.7 L GAS, 8 Cyl 5.2 L GAS, 8 Cyl 5.9 L GAS
View related parts
2000 Dodge Durango Stabilizer Bar, Rear Part Number: 52106278AA
Product Specifications
- Other Name: Bar - Rear Suspension; Suspension Stabilizer Bar, Rear; Sway Bar; Stabilizer Bar Rear Suspension
- Position: Rear
- Item Weight: 7.00 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52106278AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2000 Dodge Durango Submodels:
- Base, R/T, SLT, SLT Plus, SXT, Sport | 8 Cyl 4.7 L GAS, 8 Cyl 5.2 L GAS, 8 Cyl 5.9 L GAS
View related parts
2000 Dodge Durango Stabilizer Bar, Rear Part Number: 52106277AA
Product Specifications
- Other Name: Bar; Suspension Stabilizer Bar, Rear; Sway Bar; Stabilizer Bar Rear Suspension
- Position: Rear
- Item Weight: 9.50 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52106277AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2000 Dodge Durango Submodels:
- Base, R/T, SLT, SLT Plus, SXT, Sport | 6 Cyl 3.9 L GAS, 8 Cyl 4.7 L GAS, 8 Cyl 5.2 L GAS, 8 Cyl 5.9 L GAS

2000 Dodge Durango Sway Bar Kit Parts and Q&A

Q: How to Service and Repair a Sway Bar Kit on 2000 Dodge Durango?
A: Before servicing the sway bar kit, lift and hold up the vehicle. Remove the upper link nut, retainer, and grommet from every link and afterwards take out the lower link nut from the lower suspension arm on each side. Following that, take the necessary bolts out, let go of the retainers, and remove the sway bar kit and the bushings from the car. Start by placing the bushings on the sway bar kit, position the bar around the frame, attach with the retainers and bolts tightening to 60 Nm (45 ft. lbs.) as you check if the bar is centered and evenly spaced on each side of the frame. Join the link lower retainer and grommet with the links, then secure both links to the sway bar kit and lower suspension arm, holding the nut tight at 47 Nm (35 ft. lbs.), with both link end caps confronting you straight forward. After that, put the upper link grommet, retainer, and nut in place, fastening all of them tightly at 37 Nm (27 ft. lbs.), remove the support and lower your vehicle.