How to Service and Repair a Rear Sway Bar Kit on 2001 Dodge Durango?

For repair or service of the rear sway bar kit, the vehicle needs to be both raised and supported. In order to do this, remove the upper mounting nuts and bolts and then take the cotter pins and nuts from the links attached to the sway bar. The Puller C-3894-A makes it easy to remove the links and sway bar from the suspension. After that, get rid of the retaining bolts and retainers, then take off the sway bar and its bushings. Put in the new sway bar bushings first and then fit the sway bar so it is both centered and even spaced up and down. Affix the sway bar retainers and tighten the bolts to a value of 54 Nm (40 ft. lbs.). Set the frame and sway bar link in place and then bolt and nut them to make sure it is secure. After you remove all the support, lower the vehicle, tighten the upper sway bar link nuts to 95 Nm (70 ft. lbs.) and the lower nuts to 68 Nm (50 ft. lbs.) and add new cotter pins.

OEM 2001 Dodge Durango Sway Bar Kit

Stabilizer Sway Bar Set

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

5 Sway Bar Kits found

View related parts
2001 Dodge Durango Stabilizer Bar, Rear Part Number: 52106868AA
Product Specifications
- Other Name: Bar - Rear Suspension; Suspension Stabilizer Bar, Rear; Sway Bar; Stabilizer Bar Rear Suspension
- Position: Rear
- Item Weight: 6.40 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52106868AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2001 Dodge Durango Submodels:
- Base, R/T, SLT, SLT Plus, SXT, Sport | 8 Cyl 4.7 L GAS, 8 Cyl 5.2 L GAS, 8 Cyl 5.9 L GAS
View related parts
2001 Dodge Durango Stabilizer Bar, Front Part Number: 52106726AB
Product Specifications
- Other Name: Bar - Front Suspension; Suspension Stabilizer Bar, Front; Sway Bar; Stabilizer Bar Front
- Position: Front
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52106726AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2001 Dodge Durango Submodels:
- Base, R/T, SLT, SLT Plus, SXT, Sport | 8 Cyl 4.7 L GAS, 8 Cyl 5.2 L GAS, 8 Cyl 5.9 L GAS
View related parts
2001 Dodge Durango Stabilizer Bar, Front Part Number: 52106378AA
Product Specifications
- Other Name: Bar - Front Sway; Suspension Stabilizer Bar, Front; Sway Bar; Bar Front Sway
- Position: Front
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52106378AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2001 Dodge Durango Submodels:
- Base, R/T, SLT, SLT Plus, SXT, Sport | 8 Cyl 4.7 L GAS, 8 Cyl 5.2 L GAS, 8 Cyl 5.9 L GAS
View related parts
2001 Dodge Durango Stabilizer Bar, Rear Part Number: 52106278AA
Product Specifications
- Other Name: Bar - Rear Suspension; Suspension Stabilizer Bar, Rear; Sway Bar; Stabilizer Bar Rear Suspension
- Position: Rear
- Item Weight: 7.00 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52106278AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2001 Dodge Durango Submodels:
- Base, R/T, SLT, SLT Plus, SXT, Sport | 8 Cyl 4.7 L GAS, 8 Cyl 5.2 L GAS, 8 Cyl 5.9 L GAS
View related parts
2001 Dodge Durango Stabilizer Bar, Rear Part Number: 52106277AA
Product Specifications
- Other Name: Bar; Suspension Stabilizer Bar, Rear; Sway Bar; Stabilizer Bar Rear Suspension
- Position: Rear
- Item Weight: 9.50 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52106277AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2001 Dodge Durango Submodels:
- Base, R/T, SLT, SLT Plus, SXT, Sport | 6 Cyl 3.9 L GAS, 8 Cyl 4.7 L GAS, 8 Cyl 5.2 L GAS, 8 Cyl 5.9 L GAS

2001 Dodge Durango Sway Bar Kit Parts and Q&A

Q: How to Service and Repair a Rear Sway Bar Kit on 2001 Dodge Durango?
A: For repair or service of the rear sway bar kit, the vehicle needs to be both raised and supported. In order to do this, remove the upper mounting nuts and bolts and then take the cotter pins and nuts from the links attached to the sway bar. The Puller C-3894-A makes it easy to remove the links and sway bar from the suspension. After that, get rid of the retaining bolts and retainers, then take off the sway bar and its bushings. Put in the new sway bar bushings first and then fit the sway bar so it is both centered and even spaced up and down. Affix the sway bar retainers and tighten the bolts to a value of 54 Nm (40 ft. lbs.). Set the frame and sway bar link in place and then bolt and nut them to make sure it is secure. After you remove all the support, lower the vehicle, tighten the upper sway bar link nuts to 95 Nm (70 ft. lbs.) and the lower nuts to 68 Nm (50 ft. lbs.) and add new cotter pins.