Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us

OEM 2000 Dodge Intrepid Harmonic Balancer

Engine Harmonic Balancer
  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Harmonic Balancers found

  • 2000 Dodge Intrepid Harmonic Balancer - 4792430AA
    2000 Dodge Intrepid Harmonic Balancer Diagram - 4792430AA
    View related parts

    2000 Dodge Intrepid Crankshaft Pulley Part Number: 4792430AA

    Product Specifications
    • Other Name: Damper - Crankshaft; Engine Crankshaft Pulley; Harmonic Balancer Puller; Harmonic Balancer; Vibration Damper; Pulley; Damper Crankshaft
    • Item Weight: 7.30 Pounds
    • Item Dimensions: 9.3 x 8.2 x 4.2 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 4792430AA
    • Warranty: This genuine part is guaranteed by Mopar's factory warranty.
    More Info
    Fits the following 2000 Dodge Intrepid Submodels:
    • Base, ES, SE | 6 Cyl 2.7 L GAS
  • 2000 Dodge Intrepid Harmonic Balancer - 4663176
    2000 Dodge Intrepid Harmonic Balancer Diagram - 4663176
    View related parts

    2000 Dodge Intrepid Crankshaft Pulley Part Number: 4663176

    Product Specifications
    • Other Name: Damper - Crankshaft; Engine Crankshaft Pulley; Vibration Damper; Pulley; Damper Crankshaft; Damper, Vibration
    • Item Weight: 6.20 Pounds
    • Item Dimensions: 8.3 x 8.0 x 4.0 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 4663176
    • Warranty: This genuine part is guaranteed by Mopar's factory warranty.
    More Info
    Fits the following 2000 Dodge Intrepid Submodels:
    • Base, ES, Police, R/T, SE, SXT | 6 Cyl 3.2 L GAS, 6 Cyl 3.5 L GAS

2000 Dodge Intrepid Harmonic Balancer Parts and Q&A

  • Q: How to Service and Repair a Harmonic Balancer and Crankshaft Pulley on 2000 Dodge Intrepid?
    A: Before you start servicing or repairing these items, remove the upper radiator crossmember, the fan module and any accessory drive belts. Take out the damper center bolt, making sure to hold the damper in place with Special Tool 8191 so that it doesn't touch the tensioner, timing chain cover or damper. Next, pull the damper out with the help of Special Tools Hot Heads Sw1023 Three Jaw Puller and Hot Heads Sw1019 Swivel Upon the Slide Bar Insert. For setting up the damper, use the Special Tool 8179 Screw, Washers and Thrust Bearing from 6792 and the 6792-1 Installer tool. Turn the damper center bolt until it reaches 125 ft. lbs. (170 Nm) while the damper is held in place using Special Tool 8191. Then, replace the accessory drive belts and cooling fan module, before putting on the upper radiator crossmember.

Related 2000 Dodge Intrepid Parts

Alternate Year Models

+
1999 Dodge Intrepid Harmonic Balancer 2001 Dodge Intrepid Harmonic Balancer