Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us

OEM 2000 Dodge Intrepid Throttle Position Sensor

TPS Switch
  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Throttle Position Sensors found

  • 2000 Dodge Intrepid Throttle Position Sensor - 68405580AA
    2000 Dodge Intrepid Throttle Position Sensor Diagram - 68405580AA
    View related parts

    2000 Dodge Intrepid Throttle Position Sensor Part Number: 68405580AA

    $93.36 MSRP: $208.00
    You Save: $114.64 (56%)
    Ships in 1-2 Business Days
    ADD TO CART
    Product Specifications
    • Other Name: Sensor - Throttle Position
    • Item Weight: 0.50 Pounds
    • Item Dimensions: 1.9 x 2.1 x 1.9 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 68405580AA
    • Warranty: This genuine part is guaranteed by Mopar's factory warranty.
    More Info
    Fits the following 2000 Dodge Intrepid Submodels:
    • ES, Police, R/T, SE, SXT | 6 Cyl 3.2 L GAS, 6 Cyl 3.5 L GAS
  • 2000 Dodge Intrepid Throttle Position Sensor - 4897247AA
    2000 Dodge Intrepid Throttle Position Sensor Diagram - 4897247AA
    View related parts

    2000 Dodge Intrepid Throttle Position Sensor Part Number: 4897247AA

    $79.83 MSRP: $101.20
    You Save: $21.37 (22%)
    Ships in 1-2 Business Days
    ADD TO CART
    Product Specifications
    • Other Name: Sensor - Throttle Position; Throttle Positionition Sensor; Idle Control Motor; Idle Speed Control; Sensor Kit Throttle Position
    • Item Weight: 0.50 Pounds
    • Item Dimensions: 2.9 x 3.0 x 1.9 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 4897247AA
    • Warranty: This genuine part is guaranteed by Mopar's factory warranty.
    More Info
    Fits the following 2000 Dodge Intrepid Submodels:
    • Base, ES, SE | 6 Cyl 2.7 L GAS

2000 Dodge Intrepid Throttle Position Sensor Parts and Q&A

  • Q: How to Service a Throttle Position Sensor on 2000 Dodge Intrepid?
    A: Remove the negative battery cable as the initial step to service the Throttle Position Sensor. Remove the electrical connector attached to the TPS, then take out the mounting screws and take care of the TPS. The throttle body goes into the throttle position sensor, with the throttle shaft end resting against the two little internal tabs found inside the sensor opening. Correct indexing allows the TPS to turn a little clockwise and come into line with the screw holes on the throttle body, squeezing the assembly down slightly when in position. If just moving the sensor is not enough, hold it so the throttle shaft points in the opposite direction to the tabs in the socket. Use 3 Nm (25 in. lbs.) to tighten the mounting screws firmly. When the TPS is fitted, ensure that the throttle plate is seated; if it's not, put the sensor in the alternative slot. After that, put the electric connector back onto the TPS and put the negative battery cable in its place.

Related 2000 Dodge Intrepid Parts

Alternate Year Models

+
1999 Dodge Intrepid Throttle Position Sensor 2001 Dodge Intrepid Throttle Position Sensor