How to Replace a Coolant Temperature Sensor on 2000 Dodge Intrepid?

To change the engine coolant temperature sensor, which is located in the area of the thermostat, firstly, remove the negative battery cable. Connecting the sensor with the engine cold, unscrew it, then screw on the new sensor and tighten it to 28 Nm (20 ft. lbs.). Lastly, re-connect the electric connector and re-attach the battery cable.

OEM 2000 Dodge Intrepid Coolant Temperature Sensor

Coolant Water Temperature Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Coolant Temperature Sensor found

View related parts
2000 Dodge Intrepid Coolant Temperature Sensor Part Number: 56027873
$90.13 MSRP: $125.00
You Save: $34.87 (28%)
ADD TO CART
Product Specifications
- Other Name: Sensor - Coolant Temperature; Engine Coolant Temperature Sensor; Cooling Fan Temperature Switch; Temperature Sensor; Fan Switch; Temperature Coolant Sensor; Temperature Sending Unit; Sensor Coolant Temperature
- Item Weight: 0.50 Pounds
- Item Dimensions: 1.1 x 1.1 x 2.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 56027873
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2000 Dodge Intrepid Submodels:
- Base, ES, R/T, SE | 6 Cyl 2.7 L GAS, 6 Cyl 3.2 L GAS, 6 Cyl 3.5 L GAS

2000 Dodge Intrepid Coolant Temperature Sensor Parts and Q&A

Q: How to Replace a Coolant Temperature Sensor on 2000 Dodge Intrepid?
A: To change the engine coolant temperature sensor, which is located in the area of the thermostat, firstly, remove the negative battery cable. Connecting the sensor with the engine cold, unscrew it, then screw on the new sensor and tighten it to 28 Nm (20 ft. lbs.). Lastly, re-connect the electric connector and re-attach the battery cable.